Vizio E601i-A3 Tv User Guide

3
15
AUDIO OUT
CONNECTING TO A WIRED  NETWORK
CONNECTING TO yOUR NETwORk
Your TV is internet-ready. It can be connected to your home 
network with a Wired or Wireless connection.
Connecting to a Wired Network (Best)
1 . Connect an ethernet cable to your router and to the 
ethernet port on the back of the TV. See below.
2 .  Use the Guided Network Setup to configure the TV. See 
Using 
Guided Setup on page 40.
Connecting to a Wireless Network
1 .  Ensure you have a router or modem broadcasting as...

4
16
Completing the First-Time Setup
The first time you turn on the TV, the Setup App will guide you 
through each of the steps necessary to get your TV ready for use.
Before you begin the first-time setup:•	Your TV should be installed and the power cord should 
be connected to an electrical outlet.
•	 Your devices should be connected.
•	 If you have a wireless network, have the network key 
ready.
•	 If you are connecting to your network with an ethernet 
cable, connect it to the ethernet port on the...

5
17
Using the On-Screen Menu
Your TV features an easy-to-use on-screen menu. 
To open the on-screen menu, press the MENU button on the 
remote. You can also open the on-screen menu by pressing the 
VIA button and selecting HDTV Settings from the VIA Dock, then 
pressing OK.
From this menu, you can: •	Change the input source
•	 Change the screen aspect   
ratio
•	 Set up closed captioning
•	 Activate the sleep timer 
•	 Adjust the picture settings
•	 Adjust the audio settings
•	 Change network settings
•...

5
18
chaNgiNg the iNpUt SOUrce
External devices such as DVD players, Blu-Ray Players, and video 
game consoles can be connected to your TV. To use one of these 
devices with your TV, you must first change the input source in the 
on-screen menu.
To change the input device:
1 . Press the MENU button on the 
remote. The on-screen menu is 
displayed.
2 .  Use the Arrow buttons on the 
remote to highlight the Input  
icon and press OK. The  Input 
Source Selection menu is 
displayed.
3 .  Use the Up/Down...

5
19
SettiNg Up clOSed captiONiNg
Your TV can display closed captions for programs that include 
them. Closed captions display a transcription of a program’s 
dialogue.If the program you are viewing is not being broadcast 
with closed captions, the TV will not display them.
To activate or deactivate closed 
captions:
1 . Press the MENU button on the 
remote. The on-screen menu is 
displayed.
2 .  Use the Arrow buttons on the 
remote to highlight the CC  
icon and press OK. The  Closed 
Caption menu is...

5
20
•	Window Color - Change the edge color.
•	 Window Opacity - Change the edge type.
4 .  When you are satisfied with the appearance of the closed   
captions, press the EXIT button on the remote.
activatiNg the Sleep tiMer
When activated, the TV’s sleep timer will turn the TV off after a set 
period of time.
To use the sleep timer:
1 .  Press the MENU button on the 
remote. The on-screen menu is 
displayed.
2 .  Use the Arrow buttons on the 
remote to highlight the Sleep 
Timer icon and press OK. T h...

5
21
•	Vivid mode sets the picture settings to values that 
produce a brighter, more vivid picture. 
•	 Football, Golf, Basketball, and Baseball modes optimize 
the picture settings for their respective sports. Also try 
these modes for other sports.
•	 Custom picture mode allows you to manually change 
each of the picture settings:
Backlight - Adjusts the brightness to affect the overall 
brilliance of the picture. This option is not available 
unless Ambient Light Sensor is set to OFF. See 
Ambient...

5
22
•	Color Enhancement - Reduces oversaturation of some 
colors and improves flesh tones. Select Off, Normal, Rich 
Color, Grn/Flesh, and Grn/Blue.
•	 Adaptive Luma - Adjusts the average brightness of the 
picture to compensate for large areas of brightness. 
Select Off, Low, Medium, Strong, or Extend.
•	 Film Mode - Optimizes the picture for watching film. 
Select Auto or Off.
•	 Backlight Control - Select Off, DCR (Dynamic Contrast 
Ratio), or OPC.
•	 Ambient Light Sensor - The ambient light sensor...

5
23
Adjusting the Picture Size and Position
When displaying an image, the size and position of the display 
image can be adjusted.
To adjust the picture size and position:
1 . From the Picture menu, use the 
Arrow buttons on the remote to 
highlight  More, then press OK. 
2 .  Use the Arrow buttons on the 
remote to highlight Size & 
Position, then press OK. The  Size 
& Position menu is displayed.
3 .  Use the Arrow buttons to 
highlight the setting you wish 
to adjust, then press Left/Right 
Arrow to...

5
24
adjUStiNg the aUdiO SettiNgS
To adjust the audio settings:
1 . Press the MENU button on the 
remote. The on-screen menu is 
displayed.
2 .  Use the Arrow buttons on the 
remote to highlight Audio and 
press  OK. The Audio  Settings 
menu is displayed.
3 .  Use the Arrow buttons to 
highlight the setting you wish 
to adjust, then press Left/Right 
Arrow to change the setting:
•	Audio Mode - Change the 
audio mode. This setting 
is only available when SRS 
StudioSound  HD is set to 
Standard.
•...