Vizio E502AR HDTV User Manual

1
5
Installing the TV on a Wall
To mount your TV on a wall, you will need a wall mount. Consult 
the information below to find the appropriate mount for your TV 
model:Installing a TV on a wall requires lifting. To prevent 
injury or damage to the TV, ask someone to help you.
E502AR
Screw Size: M6
Screw Length: 12mm
Screw Pitch: 1.0mm
Hole Pattern: 300mm (V) x 
 
300mm (H)
Be sure the mount you choose is capable of supporting the 
weight of the TV. After you have determined that you have the 
correct...

2
6
Controls and Connections
ReaR Panel
Rear Panel
Ethernet - Connect ethernet cable from home network.
Coaxial - Connect coaxial cable from cable, satellite, 
or antenna. Optical Audio Out - Connect optical/SPDIF audio 
device, such as home audio receiver. Stereo Audio Out - Connect 3.5mm audio device, such 
as sound bar.
HDMI - Connect HDMI device. PC Audio In - Connect 3.5mm audio cable from PC.
RGB - Connect VGA cable from PC.
Component/Composite - Connect component or 
composite device.
USB -...

2
7
Side Panel
Side Panel
POWER - Turn TV off or on.
MENU - Open the on-screen menu.
CHANNEL UP/DOWN - Change the channel.
VOLUME UP/DOWN - Increase or decrease volume level INPUT - Change input source.  

2
8
FR ont Panel
Front Panel
REMOTE SENSOR
 
 
When using the remote, aim it directly at this sensor.            

2
9
Remote ContRol
Remote Control
inPut 
Change the currently-displayed input.
aRR ow  
Navigate the on-screen menu.exit 
Close the on-screen menu. CloSed CaPtionS 
Open the closed caption menu.
a/V ContR olS 
Control USB media player.
wide 
Switch the display mode.
mute 
Turn the audio off or on.
BaCk  
Go to the previous on-screen menu. PoweR
 
Turn TV on or off.
menu 
Display the on-screen menu.
inF o  
Display the info window.
daSh 
Use with number pad to manually 
enter a digital sub-channel. (For...

2
10
Replacing the Batteries
1 . Remove the battery cover.
2 .  Insert two batteries into the remote control. Make sure that 
the (+) and (-) symbols on the batteries match the (+) and 
(-) symbols inside the battery compartment.
3 .  Replace the battery cover.  
•	Use only good quality batteries.
•	 Inserting the batteries incorrectly may result in 
cracking or leakage that may cause a fire or 
result in injury.
•	 Dispose of old or dead batteries in accordance 
with local hazardous waste regulations.
•...

3
11
Connecting Your Devices
ConneCting A DeviCe
CONNECTING A DEVICE
BeSt
HDMi CABLe• DIGITAL 
• HD VIDEO (1080p)* 
• HD AUDIO
BetteR
CoMPonent CABLe • ANALOG 
• HD VIDEO (1080i)* 
• STEREO AUDIO
* Maximum Resolution
gooD
Av CABLe • ANALOG 
• VIDEO (480i)* 
• STEREO AUDIO
Game Console
Cable/Satellite Box
DVD/Blu-ray Player
Your TV can be used to display output from most devices. 
1 . 
Verify that your device has a video port that matches an 
available port on the TV (HDMI, Component, etc).
2 .  Turn the...

3
12
CONNECTING A PC
ConneCting A PC
RGB Cable (For Video) 3.5mm Cable (For Audio)
Your TV can be used to display output from a personal computer.
To use your TV as a PC display:
1 . 
Connect an RGB cable (not included) to your PC and the 
RGB port on the back of the TV. This cable transmits video. 
2 .  Connect a 3.5mm cable (not included) to your PC and the 
PC Audio In port on the back of the TV. This cable transmits 
audio. 
3 .  Set your PC’s resolution to match the resolution of your TV. 
See...

3
13
CONNECTING AN AUDIO DEVICE
Home Audio Receiver
VIZIO Sound Bar
CONNECTING AUDIO DEVICE
3.5mm Cable
Optical/SPDIF Cable
gooD
BetteR
Your TV can output sound to an audio device, such as a receiver 
or sound bar. 
1 . 
Verify that your device has an audio port that matches an 
available port on the TV (Optical, 3.5mm, etc).
2 .  Turn the TV and your audio device off.
3 .  Connect the appropriate cable (not included) to the TV and 
the device.
4 .  Turn the TV and your device on.      

3
14
CONNECTING TO A WIRED  NETWORK
CONNECTING TO yOUR NETwORk
Your TV is internet-ready. It can be connected to your home 
network with a Wired or Wireless connection.
Connecting to a Wired Network (Best)
1 . Connect an ethernet cable to your router and to the 
ethernet port on the back of the TV. See below.
2 .  Use the Guided Network Setup to configure the TV. See 
Using 
Guided Setup
 on page 36. Connecting to a Wireless Network
1 . 
Ensure you have a router or modem broadcasting as 
high-speed...