Vivitek Qumi Q5 User Manual

35
Advanced
To adjust the advanced settings, press  to enter the Advanced sub menu.
ITEMDESCRIPTION
Security LockPress the ◄ or ► button to enable or disable security lock 
function.
Keypad LockPress the ◄ or ► button to enable or disable keypad lock 
function.
Presentation TimerPress  to enter the Presentation menu.
Auto KeystonePress the ◄ or ► button to enable or disable automatic keystone.
Presentation Timer
To adjust the presentation timer settings, press  to enter the Presentation Timer sub...

36
Installation II Menu
To access the Installation II menu and adjust the settings, perform the following steps:
1. Enter the OSD menu.
2. Press the ◄ or ► button to select the Installation II menu.
3. Press the ▲ or ▼ button to move the cursor up or down in the Installation II menu.
ITEMDESCRIPTION
Auto SourcePress the ◄ or ► button to enable or disable automatic source 
detection.
Auto Power Off (min)Press the ◄ or ► button to automatically turn the projector lamp 
off when there is no signal.
Auto...

37
Advanced Feature
To access the Advanced menu and adjust the settings, perform the following steps:
1. Enter the OSD menu.
2. Press the ◄ or ► button to select the Installation II menu.
3. Press the ▲ or ▼ button to select the Advanced menu and then press .
4. Press the ▲ or ▼ button to move the cursor up or down in the Advanced menu.
5. Press the ◄ or ► button to change values for each applicable setting.
ITEMDESCRIPTION
OSD Menu SettingPress  to enter the OSD setting menu. See page 38 for more...

38
OSD Menu Setting
ITEMDESCRIPTION
Menu PositionPress the ◄ or ► button to select different OSD location.
Translucent MenuPress the ◄ or ► button to select OSD background translucent 
level.
Menu DisplayPress the ◄ or ► button to select OSD timeout delay.
Peripheral Test
ITEMDESCRIPTION
Remote Control TestPress  to test the IR remote controller for diagnostic.
Color TestPress  to select different colors on screen.
Button TestPress  to test the button on keypad.
Downloaded From projector-manual.com...

39
3D
ITEMDESCRIPTION
3DPress the ◄ or ► button to select Off, DLP-Link or IR.
3D Sync InvertPress the ◄ or ► button to turn 3D Sync Invert On or Off.
Factory Reset
To reset all of the menu items to the factory default values (except Language and Security 
Lock), perform the following steps:
1. Press the ▲ or ▼ button to move the cursor up or down in the Installation II menu.
2. Select the Factory Reset sub menu.
3. Press .
Downloaded From projector-manual.com Vivitek Manuals  

40
Status
To see the status of the Qumi, perform the following steps:
1. Press the ▲ or ▼ button to move the cursor up or down in the Installation II menu.
2. Select the Installation II sub menu.
3. Press  to enter the Status sub menu.
ITEMDESCRIPTION
Active SourceDisplays the activated source.
Video InformationDisplays resolution/video information for RGB source and color 
standard for Video source.
LED HoursLED use information is displayed (in hours). Eco and Normal 
counters are separated.
Downloaded...

41
Chapter 5  Taking Care of Your Qumi
Cleaning the Qumi
Cleaning the Qumi to remove dust and grime will help provide trouble-free operation.
Warning: 
1. The Qumi should be turned off and unplugged before cleaning. Failure to\
 do so may 
result in injury or damage to the system. 
2. Use only a dampened cloth when cleaning. Do not allow water to enter th\
e ventilation 
openings on the Qumi.  
3. If a small amount of water gets into the interior of the Qumi while cle\
aning, unplug the 
Qumi and set in...

42
Troubleshooting
Common Problems and Solutions
These guidelines provide tips to deal with problems you may encounter while using the 
Qumi. If the problem remains unresolved, contact your dealer for assistance.
The problem sometimes can be as simple as a wire that is not completely connected.
Review the following possible issues before proceeding to the problem-specific solutions.
• Use another electrical device to confirm that the electrical outlet is properly working.
• Make sure that the Qumi is...

43
Image Problems
Problem: No image appears on the screen
1. Verify that the settings on your personal computer are properly configured.
2. Turn off all of the equipment and power up the equipment again in the correct o\
rder.
Problem: The image is blurred
1. Adjust the Focus on the Qumi.
2. Make sure the Qumi-to-screen distance is within the specified range.
3. Clean the Qumi lens with optical lens cleaning cloth if it is dirty .
Problem: The image is wider at the top or bottom (trapezoid effect)
1....

44
Audio Problems
Problem: There is no sound
1. Adjust the volume of the audio source.
2. Check the audio cable connection.
3. Test the output of the audio source with other speakers.
4. Have the Qumi serviced.
Problem: The sound is distorted
1. Check the audio cable connection.
2. Test the output of the audio source with other speakers.
3. Have the Qumi serviced.
FAQs
1. Does Qumi work with a personal computer, notebook or netbook?
Yes. Use the provided VGA cable or HDMI cable. The Qumi can connect to...