Vivitek Qumi Q4 User Manual

							25
Chapter 4  On-Screen Display (OSD) Settings
OSD Menu Controls
The Qumi has an On-Screen Display (OSD) settings menu that allows you to make 
adjustments and changes to settings, such as display settings and audio settings. There 
are 5 menus within the OSD menu:
• Image – Various aspects of the image quality can be adjusted in this menu.
• Computer – Settings for personal computers can be adjusted in this menu.
• Video/Audio – Many settings for video and audio can be adjusted in this menu.
• Installation I – Default language and other settings can be adjusted in this menu.
• Installation II – Factory reset and other settings can be adjusted in this menu.
If the interface is set on AV-IN, HDMI/MHL or Universal I/O, the OSD menu can be 
accessed by pressing the MENU button on the remote control or keypad.
If the interface is set on the Qumi Media Suite menu, the OSD menu can be accessed by 
pressing the MENU button on the remote control or by simultaneously pressing MENU 
and  on the keypad.
Note: 
If the OSD menu is inactive for 15 seconds, the OSD menu will close.
Navigating the OSD
The remote control cursor buttons or the buttons on the top of the Qumi can be used to 
navigate and make changes to the OSD settings.
1. Enter the OSD menu.
2. Press the ◄ or 
► button to move 
through the 5 menus.
3. Press the ▲ or ▼ 
button to move the 
cursor up and down 
within in a menu.
4. Press ◄ or ► to 
change the values for 
specific settings.
5. Press MENU button 
or Exit on the remote 
control to close the 
OSD or close a 
submenu.
Note: 
Depending on the video source, not all items in the OSD can be modified. For example, 
the Horizontal/Vertical Position items in the Computer menu can only be modified when 
the Qumi is connected to a PC through a VGA cable. Settings that are not enabled or that 
cannot be modified are gray in color.  
						

							26
Setting the OSD Language
The language that is displayed in the OSD can be changed. To change the language in 
the OSD, perform the following steps: 
1. Enter the OSD menu. Press the ◄ or ► button to select the Installation I menu.
2. Press the ▲ or ▼ button until the cursor highlights the Language setting.
3. Press the ◄ or ► button until the language you want is shown in the cursor.
4. Press the EXIT button or MENU button twice to close the OSD.  
						

							27
OSD Menu Overview
Use the following illustration to quickly find a setting or determine the range for a setting.
MAIN 
MENUSUB MENUSETTINGS
ImageDisplay ModePresentation, Bright, Game, 
Movie, TV, sRGB, User, 
User1
Brilliant Color0~10
Brightness0~100
Contrast0~100
Sharpness0~31
GammaPC, MAC, Video, Chart, B&W
AdvancedColor SpaceAuto, RGB, YCbCr, YPbPr
Color TemperatureCold, Normal, Warm
Reset
ComputerHorizontal Position-5~5
Vertical Position-5~5
Frequency0~31
Tracking-5~5
Auto Image
Video/
Audio
Video AGCOff, On
Video Saturation0~100
Video Tint0~100
Video OverscanOff, On
Closed CaptioningOff, On
AudioVolume0~8
MuteOff, On
Audio InputAV-IN, HDMI, USB
Reset  
						

							28
OSD Sub-Menu Overview
MAIN 
MENU
SUB 
MENUSETTINGS
Installation ILanguageEnglish, Français, Deutsch, 
Español, Português, 簡体
中文, 繁體中文, Italiano, 
Norsk, Svenska, Nederlands, 
Русский, Polski, Suomi, 
Ελληνικά, 한국어, Magyar, 
Čeština, ةيبرعلا , Türkçe, Việt, 
日本語, ไทย, یسراف , עברית 
Blank 
Screen
Blank, Red, Green, Blue, 
White
ProjectionFront, Real, Ceiling, 
Real+Ceiling
Aspect RatioFill, 4:3, 16:9, Letter Box, 
Native, 2.35:1
Keystone-40~40
Digital Zoom-10~10
AdvancedSecurity LockOff, On
Keypad LockOff, On
Presentation 
Timer
TimerOff, On
Timer Period1~60
Timer Reset
Auto 
Keystone
Off, On
Note: 
Auto Keystone is only available in Q5 Series.  
						

							29
OSD Sub-Menu Overview
MAIN 
MENUSUB MENUSETTINGS
Installation IIAuto SourceOff, On
Auto Power Off 
(min)
0~180
Auto Power OnOff, On
LED ModeECO , Normal
AdvancedOSD Menu 
Setting
Menu PositionCenter, Down, 
Up, Left, Right
Translucent Menu0%, 25%, 50%, 
75%, 100%
Menu Display0~20
Peripheral TestRemote Control 
Test
Color Test
Button Test
3D3DOff, DLP-Link, IR
3D Sync InvertOff, On
Low Power ModeOff, On
Factory Reset
StatusActive Source
Video Information
LED Hours(Eco., 
Normal)  
						

							30
Image Menu 
To access the Image menu and adjust the settings, perform the following steps:
1. Enter the OSD menu.
2. Press the ◄ or ► button to select the Image menu.
3. Press the ▲ or ▼ button to move the cursor up or down in the Image menu.
4. Press the ◄ or ► button to change values for each applicable setting.
ITEMDESCRIPTION
Display ModePress the ◄ or ► button to set the Display Mode.
Brilliant ColorPress the ◄ or ► button to adjust the Brilliant Color value.
BrightnessPress the ◄ or ► button to adjust the display brightness.
ContrastPress the ◄ or ► button to adjust the display contrast.
SharpnessPress the ◄ or ► button to adjust the display sharpness level.
GammaPress the ◄ or ► button to adjust the gamma correction of the 
display.
AdvancedPress  to enter the Advanced menu. See Advanced Feature on 
page 31.
ResetPress  to reset all settings to default values.
Note: 
The Brilliant Color, Brightness, Contrast, Sharpness, Gamma and Advanced settings are 
adjustable only when the Display Mode is set to User and User1.  
						

							31
Advanced Feature
To access the Advanced menu and adjust the settings, perform the following steps:
1. Enter the OSD menu.
2. Press the ◄ or ► button to select the Image menu.
3. Press the ▲ or ▼ button to move to the Advanced menu and then press .
4. Press the ▲ or ▼ button to move the cursor up or down in the Advanced menu.
ITEMDESCRIPTION
Color SpacePress the ◄ or ► button to adjust the color space.
Color TemperaturePress the ◄ or ► button to adjust the color temperature.  
						

							32
Computer Menu
To access the Computer menu and adjust the settings, perform the following steps:
1. Enter the OSD menu.
2. Press the ◄ or ► button to select the Computer menu.
3. Press the ▲ or ▼ button to move the cursor up or down in the Computer menu.
4. Press the ◄ or ► button to change values for each applicable setting.
ITEMDESCRIPTION
Horizontal PositionPress the ◄ or ► button to adjust the display position to left or 
right.
Vertical PositionPress the ◄ or ► button to adjust the display position to up or 
down.
FrequencyPress the ◄ or ► button to adjust the A/D sampling clock.
TrackingPress the ◄ or ► button to adjust the A/D sampling dot.
Auto ImagePress  to automatically adjustment for phase, tracking, size and 
position.
Note: 
Items in the Computer menu can only be modified when the Qumi is connected to a PC 
through a VGA cable. Settings that are not enabled or that cannot be modified are gray in 
color.  
						

							33
Video/Audio Menu
To access the Video/Audio menu and adjust the settings, perform the following steps:
1. Enter the OSD menu.
2. Press the ◄ or ► button to select the Video/Audio menu.
3. Press the ▲ or ▼ button to move the cursor up and down in the Video/Audio menu.
4. Press the ◄ or ► button to change values for each applicable setting.
ITEMDESCRIPTION
Video AGCPress the ◄ or ► button to enable or disable the Automatic Gain 
Control for video source.
Video SaturationPress the ◄ or ► button to adjust the video saturation.
Video TintPress the ◄ or ► button to adjust the video tint/hue.
Video OverscanPress the ◄ or ► button to enable or disable video over scan.
Closed CaptioningPress the ◄ or ► button to enable or disable Closed Captioning.
AudioPress  to enter the Audio menu. See Audio on page 34.
ResetPress  to reset all settings to default values.
Note: 
Video AGC, Video Saturation, Video Tint and Closed Caption settings are adjustable only 
when the source is from composite video. The Video Overscan settings are adjustable 
only when the source is from composite, component and HDMI video.  
						

							34
Audio
To adjust the audio settings, press  to enter the Audio sub menu.
ITEMDESCRIPTION
VolumePress the ◄ or ► button to adjust the audio volume.
MutePress the ◄ or ► button to turn on or off the speaker.
Audio InputPress the ◄ or ► button to select audio input.
Note: 
The speaker is only available in Q5 Series.