Vivitek Qumi Q2 User Manual

25
Advanced Feature
To access the Advanced menu and adjust the settings, perform the following steps:
1. Enter the OSD menu.
2. Press the ◄ or ► button to select the Image menu.
3. Press the ▼ or ▲ button to move to the Advanced menu and then press .
4. Press the ▼ or ▲ button to move the cursor up or down in the Advanced menu.
ITEMDESCRIPTION
Color Space Press the ◄ or ► button to adjust the color space.
Color Temperature Press the ◄ or ► button to adjust the color temperature.  

26
Computer Menu
To access the Computer menu and adjust the settings, perform the following steps:
1. Enter the OSD menu.
2. Press the ◄ or ► button to select the Computer menu.
3. Press the ▲ or ▼ button to move the cursor up or down in the Computer menu.
4. Press the ◄ or ► button to change values for each applicable setting.
ITEMDESCRIPTION
Horizontal PositionPress the ◄ or ► button to adjust the display position to left or 
right. 
Vertical PositionPress the ◄ or ► button to adjust the display...

27
Video/Audio Menu
To access the Video/Audio menu and adjust the settings, perform the following steps:
1. Enter the OSD menu.
2. Press the ◄ or ► button to select the Video/Audio menu.
3. Press the ▲ or ▼ button to move the cursor up and down in the Video/Audio menu.
4. Press the ◄ or ► button to change values for each applicable setting.
ITEMDESCRIPTION
Video AGCPress the ◄ or ► button to enable or disable the Automatic Gain 
Control for video source.
Video SaturationPress the ◄ or ► button to adjust...

28
Audio
To adjust the audio settings, press  to enter the Audio sub menu.
ITEMDESCRIPTION
VolumePress the ◄ or ► button to adjust the audio volume. 
MutePress the ◄ or ► button to turn on or off the speaker.
Audio InputPress the ◄ or ► button to select audio input.   

29
Installation I Menu 
To access the Installation I menu and adjust the settings, perform the following steps:
1. Enter the OSD menu.
2. Press the ◄ or ► button to select the Installation I menu.
3. Press the ▲ or ▼ button to move the cursor up or down in the Installation I menu.
4. Press the ◄ or ► button to change values for each applicable setting.
ITEMDESCRIPTION
LanguagePress the ◄ or ► button to select a different localization menu.
Blank ScreenPress the ◄ or ► button to select different color to...

30
Advanced
To adjust the advanced settings, press  to enter the Advanced sub menu.
ITEMDESCRIPTION
Security LockPress the ◄ or ► button to enable or disable security lock 
function.
Keypad LockPress the ◄ or ► button to enable or disable keypad lock 
function.
Presentation TimerPress  to enter the Presentation menu.
Presentation Timer
To adjust the presentation timer settings, press  to enter the Presentation Timer sub 
menu.
ITEMDESCRIPTION
TimerPress the ◄ or ► button to enable or disable presentation...

31
Installation II Menu 
To access the Installation II menu and adjust the settings, perform the following steps:
1. Enter the OSD menu.
2. Press the ◄ or ► button to select the Installation II menu.
3. Press the ▲ or ▼ button to move the cursor up or down in the Installation II menu.
ITEMDESCRIPTION
Auto SourcePress the ◄ or ► button to enable or disable automatic source 
detection.
LED ModePress the ◄ or ► button to select the LED mode for higher 
brightness or lower brightness to save LED life....

32
Advanced Feature
To access the Advanced menu and adjust the settings, perform the following steps:
1.  Enter  the OSD menu.
2.  
Press the ◄ or ► button to select the Installation II menu.
3.  
Press the ▲ or ▼ button to select the Advanced menu and then press .
4.  
Press the ▲ or ▼ button to move the cursor up or down in the Advanced menu.
5.  
Press the ◄ or ► button to change values for each applicable setting.
ITEMDESCRIPTION
OSD Menu SettingPress  to enter the OSD setting menu. See page 33 for...

33
OSD Menu Setting
ITEMDESCRIPTION
Menu PositionPress the ◄ or ► button to select different OSD location.
Translucent MenuPress the ◄ or ► button to select OSD background translucent 
level.
Menu DisplayPress the ◄ or ► button to select OSD timeout delay.
Peripheral Test
ITEMDESCRIPTION
Remote Control  
TestPress  to test the IR remote controller for diagnostic.
Color TestPress  to select different colors on screen.
Button TestPress  to test the button on keypad.  

34
3D
ITEMDESCRIPTION
3DPress the ◄ or ► to select Off, DLP-Link or IR.
3D Sync InvertPress the ◄ or ► to turn 3D Sync Invert On or Off.
Factory Reset
To reset all of the menu items to the factory default values (except Lan\
guage and Security 
Lock), perform the following steps:
1. Press the ▲ or ▼ button to move the cursor up or down in the Installation II menu.
2. Select the Factory Reset sub menu.
3. Press .