Vivitek Projector DW3321 User Manual

— 22 — 
OSD Menu Overview 
Use the following illustration to quickly find a setting or determine the range for a setting. 
MAIN MENU  SUB MENU     SETTINGS 
PICTURE >> 
Basic 
 Display Mode     Presentation, Bright, Game, 
Movie, Vivi, TV, sRGB, 
Blackboard, DICOM SIM, 3D, 
User1, User2 
 Brightness     0~100 
 Contrast     50~50 
 Color     50~50 
 Tint     50~50 
 Sharpness     0~15 
 Reset Picture 
Settings 
 Current    
  All    
  Cancel    
PICTURE >> 
Advanced 
 Brilliant Color     On, Off 
 Color...

 
– 23 – 
MAIN MENU  SUB MENU     SETTINGS 
DISPLAY  Aspect Ratio     Fill, 4:3, 16:9, 16:10, Letter, 
Box, Native, 2.35:1 
 V Keystone     -30 ~30 
 H Keystone     -25 ~25 
 4 Corner     Left-Top, Right-Top, Right-
Bottom, Left-Bottom 
 Pincushion     Horz. Left, Horz. L+R, Horz. 
Right, Vert. Top, Vert. T+B, 
Vert. Bottom 
 PC Detail 
Adjustment 
 Auto    
  Frequency   -15 ~ 15 
  Phase   0~63 
  Horizontal 
Position 
  -5 ~ 5 
  Vertical Position   -5 ~ 5 
 3D Setting  3D Mode   Auto, Top/Bottom,...

— 24 — 
MAIN MENU  SUB MENU     SETTINGS 
SYSTEM 
SETUP >> 
Advanced 
 High Altitude 
Mode 
    Off, On 
 Audio Settings  Mute   Off, On 
  Volume   0 ~ 10 
  Out   Off, Mini, RCA 
 Lamp Settings  Lamp Mode   Normal, ECO, Dynamic ECO 
  Reset Lamp Timer   Yes, No 
  Total Lamp Hour    
 Test Pattern     Off, Grid, White, Red, Green, 
Blue, Black 
 Closed Caption  Closed Caption 
Enable 
  Off, On 
  Caption Version   CC1, CC2, CC3, CC4 
 Low Power Mode     Off, On, On By Lan 
 Network Settings  Wired Lan...

 
– 25 – 
MAIN MENU  SUB MENU     SETTINGS 
INFORMATION  Source      
 Picture Mode      
 Lamp Mode      
 Resolution      
 3D Info      
 Lamp Hour 
(Normal, ECO, 
Total) 
     
 Air filter hour      
 Firmware Version      
 Remote ID      
 S/N      
 
 
  

— 26 — 
PICTURE >> Basic Menu 
Press the MENU button to open the OSD menu. Press the cursor ◄ / ► buttons to move to the PICTURE 
>> Basic menu. Press the cursor ▲ / ▼ buttons to move up and down in the PICTURE >> Basic menu. 
Press the cursor ◄ / ► buttons to change values for settings. 
Note: 
Customizing the settings in PICTURE >> Basic menu is only available in User 1 / 2 mode. 
 
ITEM DESCRIPTION 
Display Mode 
Press the cursor ◄ / ► buttons to set the display mode.  
Note: The DISCOM SIM mode...

 
– 27 – 
PICTURE >> Advanced Menu 
Press the MENU button to open the OSD menu. Press the cursor ◄ / ► buttons to move to the  
PICTURE >> Advanced menu. Press the cursor ▲ / ▼ buttons to move up and down in the  
PICTURE >> Advanced menu. Press the cursor ◄ / ► buttons to change values for settings. 
 
ITEM DESCRIPTION 
Brilliant Color Press the cursor ◄ / ► buttons to set the brilliant color.  
Color Temperature Press the cursor ◄ / ► buttons to set the color temperature. 
Wall Color Press the cursor ◄...

— 28 — 
HSG Adjustment 
Press the ENTER button to enter the HSG Adjustment sub menu. 
 
ITEM DESCRIPTION 
Primary Color Press the cursor ◄ / ► buttons to set the Primary Color. 
Hue Press the cursor ◄ / ► buttons to adjust the Hue. 
Saturation Press the cursor ◄ / ► buttons to adjust the Saturation. 
Gain Press the cursor ◄ / ► buttons to adjust the Gain. 
User Color Temp 
Press the ENTER button to enter the User Color Temp sub menu. 
 
ITEM DESCRIPTION 
White Gain Red Press the cursor ◄ / ► buttons to...

 
– 29 – 
White Balance 
Press the ENTER button to enter the White Balance sub menu. 
 
ITEM DESCRIPTION 
Red Gain Press the cursor ◄ / ► buttons to adjust the Red Gain. 
Green Gain Press the cursor ◄ / ► buttons to adjust the Green Gain. 
Blue Gain Press the cursor ◄ / ► buttons to adjust the Blue Gain. 
Red Offset Press the cursor ◄ / ► buttons to adjust the Red Offset. 
Green Offset Press the cursor ◄ / ► buttons to adjust the Green Offset. 
Blue Offset Press the cursor ◄ / ► buttons to adjust the...

— 30 — 
DISPLAY Menu 
Press the MENU button to open the OSD menu. Press the cursor ◄ / ► buttons to move to the DISPLAY 
menu. Press the cursor ▲ / ▼ buttons to move up and down in the DISPLAY menu. Press the cursor  
◄ / ► buttons to change values for settings. 
 
ITEM DESCRIPTION 
Aspect Ratio Press the cursor ◄ / ► buttons to set the ~spect êatio. 
Note: Without support when 3D mode activated. 
Vertical Keystone Press the cursor ◄ / ► buttons to adjust the vertical âeystone. 
Horizontal Keystone Press...

 
– 31 – 
4 Corner 
Press the ENTER button to enter the 4 Corner sub menu. 
1. Press the cursor ▲ / ▼ / ◄ / ► buttons to select a corner and press ENTER. 
 
2. Press the cursor ▲ / ▼ buttons to adjust vertical and press the cursor ◄ / ► buttons to 
adjust horizontal. 
3. Press ENTER to save the settings.