Vivitek Projector DW3320 User Manual
Here you can view all the pages of manual Vivitek Projector DW3320 User Manual. The Vivitek manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 31
— 22 —
Adjusting the Volume
7. Press the Volume buttons on the remote
control.
The volume control appears on the
display.
8. Press the ◄ / ► buttons on the keypad
to adjust Volume +/-.
9. Press the MUTE button to turn off the
volume (This feature is available only on
the remote).
Page 32
– 23 – ON-SCREEN DISPLAY (OSD) MENU SETTINGS OSD Menu Controls The projector has an OSD that lets you make image adjustments and change various settings. Navigating the OSD You can use the remote control cursor buttons or the buttons on the top of the projector to navigate and make changes to the OSD. The following illustration shows the corresponding buttons on the projector. 1. To enter the OSD, press the MENU button. 2. There are three menus. Press the cursor ◄ / ► buttons to move through...
Page 33
— 24 — Setting the OSD Language Set the OSD language to your preference before continuing. 1. Press the MENU button. Press the cursor ◄► button to navigate to Settings 1. Press the cursor ▲▼ button to move to the Advanced 1 menu. 2. Press (Enter) / ► to enter the Advanced 1 sub menu. Press the cursor ▲▼ button until Language is highlighted. 3. Press the cursor button until the language you want is highlighted. 4. Press the MENU button four times to close the OSD.
Page 34
– 25 –
OSD Menu Overview
Use the following illustration to quickly find a setting or determine the range for a setting.
Main
Menu
Sub Menu
Settings
Image Display Mode Presentation, Bright, Game,
Movie, Vivid, TV, sRGB,
DICOM SIM, User
Brightness 0~100
Contrast 0~100
Computer Horizontal Position -5~5 (depend on Autolock)
Vertical Position -5~5 (depend on Autolock)
Frequency 0~31
Tracking -5~5
Auto Sync On, Off
Auto Image
Advanced...
Page 35
— 26 — Main Menu Sub Menu Settings S ettings 1 Source Source reference Input Source Select (IR/Keypad) Projection Normal, Rear, Ceiling, Rear+Ceiling Aspect Ratio Fill, 4:3, 16:9, Letter Box, Native, 2.35:1 Keystone H: - 25 ~ +25 V: - 30 ~ +30 Digital Zoom - 10~10 Audio Volume 0 ~10 Mute Off, On Out Off, Mini, RCA Advanced 1 Language English, Français, Deutsch, Españ ol, Portuguê s, 簡体中文 , 繁體中文 , Italiano, Norsk, Svenska, Nederlands, Русский,...
Page 36
– 27 –
Main
Menu
Sub Menu
Settings
Settings 2 Auto Source Off, On
No Signal
Power Off
0~180
Auto Power
On
Off, On
Lamp Mode ECO , Normal, Dynamic ECO
Reset All
Status Active Source
Video Information
Lamp Hours(ECO, Normal,
Dynamic ECO)
Software Version
Remote ID
Serial Number
Air Filter Hour
Advanced 1 Menu Position Center, Down, Up, Left, Right
Translucent Menu 0%, 25%, 50%, 75%, 100%
Low Power...
Page 37
— 28 — Image Menu Attention ! All of display mode parameters when changed will be saved to user mode. Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the Image Menu. Press the cursor ▲▼ button to move up and down in the Image menu. Press ◄► to enter and change values for settings. ITEM DESCRIPTION Display Mode Press the cursor ◄► button to enter and set the Display Mode. Brightness Press the cursor ◄► button to enter and adjust the display brightnessK...
Page 38
– 29 – Computer Menu Press the MENU button to open the OSD menu. Press ◄► to move to the Image menu. Press ▲▼ to move to the Computer menu and then press Enter or ►. Press ▲▼ to move up and down in the Computer menu. ITEM DESCRIPTION Horizontal Position Press the cursor ◄► button to enter and adjust the display position to left or right. Vertical Position Press the cursor ◄► button to enter and adjust the display position to up or down. Frequency Press the cursor ◄► button to enter and adjust...
Page 39
— 30 — Advanced Feature Press the Menu button to open the OSD menu. Press ◄► to move to the Image menu. Press ▼▲ to move to the Advanced menu and then press Enter or ►. Press ▼▲ to move up and down in the Advanced menu. ITEM DESCRIPTION Brilliant Color Press the cursor ◄► button to enter and adjust the Brilliant Color valueK Sharpness Press the cursor ◄► button to enter and adjust the display sharpnessK Gamm~ Press the cursor ◄► button to enter and adjust the gamma correction of the displayK...
Page 40
– 31 – White Balance Press the ENTER button to enter the White Balance sub menu. ITEM DESCRIPTION R Gain Press the ◄► buttons to adjust the Red GainK G Gain Press the ◄► buttons to adjust the Green GainK B Gain Press the ◄► buttons to adjust the Blue Gain. R Offset Press the ◄► buttons to adjust the Red OffsetK G Offset Press the ◄► buttons to adjust the Green OffsetK B Offset Press the ◄► buttons to adjust the Blue Offset.