Vivitek Projector DU6871 User Manual
Have a look at the manual Vivitek Projector DU6871 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 263 Vivitek manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 6
6
Disposal of Old Electric and Electronic Equipment
The symbol on your product or the package represents that the product sh\
ould not be
treated as the normal household waste when discarded but should be carri\
ed to the
recycling location of the waste electric and electronic equipment� The consequence on
the environment and human health due to the incorrect disposal of the pr\
oduct can be
prevented if it can be ensured that the product is properly discarded� Material recycling
is helpful to the...](http://img.usermanuals.tech/thumb/5166/99555/w64_projector_manual_8122_d-5.png "Page 6
6
Disposal of Old Electric and Electronic Equipment
The symbol on your product or the package represents that the product sh\
ould not be
treated as the normal household waste when discarded but should be carri\
ed to the
recycling location of the waste electric and electronic equipment� The consequence on
the environment and human health due to the incorrect disposal of the pr\
oduct can be
prevented if it can be ensured that the product is properly discarded� Material recycling
is helpful to the...")
![Page 7
7
The User's Manual describes the installation, setup and operation of the DU6871/DW6851/
DX6831 projector and provides assistance to the installation personnel and the end-user to
fully develop the performance of the projector� VIVITEK has made every efforts to ensure
that the information in the Manual is correct at the time of printing� The contents may be
frequently updated due to the continuously product improvement and custo\
mer feedback�
You can find the latest version of the Manual and...](http://img.usermanuals.tech/thumb/5166/99555/w64_projector_manual_8122_d-6.png "Page 7
7
The User's Manual describes the installation, setup and operation of the DU6871/DW6851/
DX6831 projector and provides assistance to the installation personnel and the end-user to
fully develop the performance of the projector� VIVITEK has made every efforts to ensure
that the information in the Manual is correct at the time of printing� The contents may be
frequently updated due to the continuously product improvement and custo\
mer feedback�
You can find the latest version of the Manual and...")
![Page 8
8
Packing Checklist
The following items are included in the packaging box of the DU6871/DW68\
51/DX6831
projector� If any loss or damage to any item, contact your dealer or the VIVITEK c\
ustomer
service department�
AC power cord
IR remote control
RoHS card (China) Qualification certificate
(China)
Users Manual discVGA signal cableColor-optimized
color wheel
Cable of the wired remote control M4 screw
铅（Pb
）汞（Hg ）镉（Cd ）六价铬（Cr(VI) ）多溴联苯（PBB ）多溴二苯醚（PBDE ）
光机引擎( 铝或铝镁合金) X
O O O O O
镜头 X
O O O O O
灯泡 X...](http://img.usermanuals.tech/thumb/5166/99555/w64_projector_manual_8122_d-7.png "Page 8
8
Packing Checklist
The following items are included in the packaging box of the DU6871/DW68\
51/DX6831
projector� If any loss or damage to any item, contact your dealer or the VIVITEK c\
ustomer
service department�
AC power cord
IR remote control
RoHS card (China) Qualification certificate
(China)
Users Manual discVGA signal cableColor-optimized
color wheel
Cable of the wired remote control M4 screw
铅（Pb
）汞（Hg ）镉（Cd ）六价铬（Cr(VI) ）多溴联苯（PBB ）多溴二苯醚（PBDE ）
光机引擎( 铝或铝镁合金) X
O O O O O
镜头 X
O O O O O
灯泡 X...")
![Page 11
11
Control Panel
ENGER
++
- -
• POWER
User the button to turn on/off the projector �
• INPUT
Push the button to select the video source� HDMI, DVI, VGA, Component/BNC
DisplayPort or HDBaseT�
• AUTO SYNC
Implement automatic signal synchronization�
• ASPECT
Change the aspect ratio of the current image and push the button to chan\
ge to the next
aspect ratio settings�
• MENU
Push the button to display or hide the OSD menu�
• ENTER
Use the button to select settings or confirm the changed settings�
• EXIT...](http://img.usermanuals.tech/thumb/5166/99555/w64_projector_manual_8122_d-10.png "Page 11
11
Control Panel
ENGER
++
- -
• POWER
User the button to turn on/off the projector �
• INPUT
Push the button to select the video source� HDMI, DVI, VGA, Component/BNC
DisplayPort or HDBaseT�
• AUTO SYNC
Implement automatic signal synchronization�
• ASPECT
Change the aspect ratio of the current image and push the button to chan\
ge to the next
aspect ratio settings�
• MENU
Push the button to display or hide the OSD menu�
• ENTER
Use the button to select settings or confirm the changed settings�
• EXIT...")
![Page 14
14
Precautions For installation
The high quality display effect can be guaranteed only when the projector is correctly
installed� Generally, the light source facing the screen should be reduced or eliminated as \
much as possible� The contrast of the image will be obviously reduced if the light directl\
y
shines on the screen, such as the beam from windows or the searchlight c\
ast on the
image� The image may become faded and not bright�
Projector Installation and Setup
There are 6 fixture screw...](http://img.usermanuals.tech/thumb/5166/99555/w64_projector_manual_8122_d-13.png "Page 14
14
Precautions For installation
The high quality display effect can be guaranteed only when the projector is correctly
installed� Generally, the light source facing the screen should be reduced or eliminated as \
much as possible� The contrast of the image will be obviously reduced if the light directl\
y
shines on the screen, such as the beam from windows or the searchlight c\
ast on the
image� The image may become faded and not bright�
Projector Installation and Setup
There are 6 fixture screw...")
![Page 15
15
Cautions on ventilation
The product is a high-brightness projector. The intake with filters are located on the front and
right sides to provide sufficient air for cooling. The projector has two vents on the back for
cool air discharging� Make sure the intake and vent are unobstructed when the projector is
being installed� At least 50cm around the intake and 70cm around the vent should be clear\
�
50cm above50cm above
70cm above
30cm above
R/PrG/YB/Pb
HDBaseT / LAN
3D Sync Out
RGB IN
RS-232 USB
T...](http://img.usermanuals.tech/thumb/5166/99555/w64_projector_manual_8122_d-14.png "Page 15
15
Cautions on ventilation
The product is a high-brightness projector. The intake with filters are located on the front and
right sides to provide sufficient air for cooling. The projector has two vents on the back for
cool air discharging� Make sure the intake and vent are unobstructed when the projector is
being installed� At least 50cm around the intake and 70cm around the vent should be clear\
�
50cm above50cm above
70cm above
30cm above
R/PrG/YB/Pb
HDBaseT / LAN
3D Sync Out
RGB IN
RS-232 USB
T...")
![Page 16
16
Lens Shift
The DU6871/DW6851/DX6831 projector has the lens shift feature and the im\
age can be
vertically shifted without moving the projector� The lens shift bit is shown in the percentage of
the screen height� The project installed on the desk can move up and down by 50% (0�5V)�
Vertical lens shift
The project installed on the desk can move up and down by 50% (0�5V)�
Vertical shift
Projected image
heightProjected
image
height V
0.5V
(Max.)
0.5V
(Max.)
The lens of the ceiling mount projector...](http://img.usermanuals.tech/thumb/5166/99555/w64_projector_manual_8122_d-15.png "Page 16
16
Lens Shift
The DU6871/DW6851/DX6831 projector has the lens shift feature and the im\
age can be
vertically shifted without moving the projector� The lens shift bit is shown in the percentage of
the screen height� The project installed on the desk can move up and down by 50% (0�5V)�
Vertical lens shift
The project installed on the desk can move up and down by 50% (0�5V)�
Vertical shift
Projected image
heightProjected
image
height V
0.5V
(Max.)
0.5V
(Max.)
The lens of the ceiling mount projector...")
11 Control Panel ENGER ++ - - • POWER User the button to turn on/off the projector � • INPUT Push the button to select the video source� HDMI, DVI, VGA, Component/BNC DisplayPort or HDBaseT� • AUTO SYNC Implement automatic signal synchronization� • ASPECT Change the aspect ratio of the current image and push the button to chan\ ge to the next aspect ratio settings� • MENU Push the button to display or hide the OSD menu� • ENTER Use the button to select settings or confirm the changed settings� • EXIT Push the button to return to the menu on the previous level or exit the \ OSD menu� • CENTER LENS Push the button to center the lens and calibrate the parameter of lens s\ hift, focusing and zooming� Note: The lens memory function requires the accurate lens adjustment parameter\ � Please center the lens every time after the lens is mounted� • SHUTTER Use the button to open/close the shutter � • LENS SHIFT Use the button to move the lens to the right or left� • FOCUS Use the button to adjust the focus of projected image� • ZOOM Use the button to zoom in/out the lens� DU6871/DW6851/DX6831 DLP Projector - User's Manual
12 BLANK 3D MODE • ON Use the button to turn on the projector � • OFF Use the button to turn off the projector� • FOCUS Adjust the focus of the projected image� • ZOOM Zoom in/out the projected image� • TEST PATTERN Use the button to display the test image� Push to switch to the next test image and push the EXIT button to return to the projected image� • LENS SHIFT Use the button to move the lens to the right or left� • ENTER Use the button to select settings or confirm the changed settings. • MENU Push the button to display or hide the OSD menu� • EXIT Push the button to return to the menu on the previous level or exit the OSD menu� • INPUT Push the button to select the input source� • PICTURE Start to adjust the image� • NETWORK Push the button to enter the LAN menu� • AUTO SYNC Push the button to carry out automatic signal synchronization� • ASPECT Repeatedly push the button to select the proportion for the next screen� • BLANK Push the button to temporarily interrupt the projection� • OVERSCAN Push the button to select the overscan mode� • FREEZE Freeze/cancel the freeze of the projected image� • LAMP MODE Push the button to select dual lamp, Lamp 1 Lamp 2, Single� • 3D MODE Display the 3D settings menu� • INFO. Display the service menu� • LIGHT Push the button to turn on the backlight of the remote control� • CLEAR: No function • SHUTTER Use the button to open/close the shutter � • ID SET: No function Remote Control Remote Control Instructions• Reflection may be affected by the environment under some circumstances. Aim the remote control at the project to try again if it happens.* Change the battery if the effective distance of the remote control is reduced or the remote control does not work.• When the terminal of the remote control cable is inserted to the wired control terminal of the projector, the projector will automatically switch to the wired control mode and cannot be controlled through the IR signal of the remote control. Disconnect the wired control terminal on the projector if you want to control through the IR signal of the remote control.• Pay attention to the installation environment because the signal may not work due to interference if the IR remote sensor is exposed to the bright sunlight or fluorescence. DU6871/DW6851/DX6831 DLP Projector - User's Manual
13 Installation of the Remote Control Battery 123 1� Slide the battery cover in the direction of the arrow� 2� Place two AA batteries with the correct polarity� 3� Slide on the cover� Battery installation instructions • Make sure the battery is installed with the correct polarity • Do not use the old and new batteries or the batteries of different types together • Remove the battery if the remote control may not be used for a long time to prevent the damage caused by leaks Remote Control Operating Range 10m ±30° Note: • Do not expose the remote control to high temperature or humidity; otherwise, the remote control will not work functionally. DU6871/DW6851/DX6831 DLP Projector - User's Manual
14 Precautions For installation The high quality display effect can be guaranteed only when the projector is correctly installed� Generally, the light source facing the screen should be reduced or eliminated as \ much as possible� The contrast of the image will be obviously reduced if the light directl\ y shines on the screen, such as the beam from windows or the searchlight c\ ast on the image� The image may become faded and not bright� Projector Installation and Setup There are 6 fixture screw holes at the bottom of projector for ceiling mounting, the available installation options as below� Front: Install the projector on the table and project the image forward� Rear: Install the projector on the table and project the image from rear � Ceiling + Front: Mounting the projector on the ceiling and project the image forward� Ceiling + Rear: Mounting the projector on the ceiling and project the image from rear � Up + Front: Projector is mounted vertically upwards and project image upwards� Down + Front: Projector is mounted vertically downwards and project image downwards� 6 fixture screw for ceiling mount The screw is M4*0�7� The maximum length of screws is 18mm� DU6871/DW6851/DX6831 DLP Projector - User's Manual
15 Cautions on ventilation The product is a high-brightness projector. The intake with filters are located on the front and right sides to provide sufficient air for cooling. The projector has two vents on the back for cool air discharging� Make sure the intake and vent are unobstructed when the projector is being installed� At least 50cm around the intake and 70cm around the vent should be clear\ � 50cm above50cm above 70cm above 30cm above R/PrG/YB/Pb HDBaseT / LAN 3D Sync Out RGB IN RS-232 USB T RIGGER H V Display PortDVI-D WIRE RGB OUT HDMI MENU EXIT POWER INPUTA UT O SY NC ASPEC T FOCUS LENS SHIFT Z OOM SHUTTER CENTER LENS Note: • If the installation distance is not enough, the projector may enter the system protection mode due to the rising ambient temperature after running for a while. Then, projection may be interrupted. • The service life of components or lamps may be reduced due to the long-term effect of the ambient temperature if the installation distance is not appropriate. • If the projector has to be installed in a box or a closed environment due to the installation requirements, the external intake and vent system should be designed additionally to ensure that there is enough air for cooling or the projector will not be surrounded by heat. DU6871/DW6851/DX6831 DLP Projector - User's Manual
16 Lens Shift The DU6871/DW6851/DX6831 projector has the lens shift feature and the im\ age can be vertically shifted without moving the projector� The lens shift bit is shown in the percentage of the screen height� The project installed on the desk can move up and down by 50% (0�5V)� Vertical lens shift The project installed on the desk can move up and down by 50% (0�5V)� Vertical shift Projected image heightProjected image height V 0.5V (Max.) 0.5V (Max.) The lens of the ceiling mount projector can move down by 50% (0�5V)� R/Pr G/YB/Pb HDBaseT / LAN 3D Sync Out RGB IN RS-232 USB T RIGGER H VDisplay PortDVI-D WIRE RGB OUT HDMIMENU EXIT POWER INPUTA UT O SY NC ASPEC T FOCUS LENS SHIFT Z OOM SHUTTERCENTER LENS Vertical shift Projected image heightProjected image height V 0.5V (Max.) 0.5V (Max.) Horizontal lens shift The image can be shifted horizontally to the right or left by 10% (0�1H) without moving the projector � H 0.1H 0.1H Normal projection area Shift to the leftShift to the right H: Projected image width 0.5V (Max.) Projected image width Projected image height V Note: • This is the general example of lens shift. The shift ability depends on the lens. No specific lens or projector is used in the example. DU6871/DW6851/DX6831 DLP Projector - User's Manual
17 Connecting the Projector to Other Equipment Follow the instructions below to connect the DU6871/DW6851/DX6831 projec\ tor to the video source, external control equipment (if any) and AC power supply� When connecting to the equipment, use the correct signal cable to connect to every signa\ l source and ensure that the cable is securely connected� Fasten the nut on the joint and connect the signal source equipment to the projector according to the figure below. Connecting to the personal computer You can connect the PC signal to be projected to the projector through th\ e DVI-D, HDMI, DisplayPort, RGB or RGBHV (BNC) cable� If the signal to be input is VGA signal, connect the VGA cable to the external display to simultaneously monitor the projected s\ creen� Connecting to the video equipment Connect the video equipment to the input port of the projector via the D\ VI-D, HDMI, DisplayPort and Component Video Connector cable� DU6871/DW6851/DX6831 DLP Projector - User's Manual
18 Connecting to the control equipment The projector has the following control port for connecting to the contr\ ol equipment: 3D sync signal transmitter (IR) • HDBaseT/LAN (Network control): The projector supports network control� LAN and HDBaseT share the port� If only network control is used, you can connect the LAN on the projector to PC or through the local network� Refer to the remote control guidelines for detailed information� • RS-232 (RS-232c control): The projector supports RS-232c serial control� The projector can be remote-controlled by connecting the projector to PC or \ control system through the standard 9-pin serial cable (Straight Through Serial Cable)� Refer to the remote control guidelines for detailed information� • Wired remote control: If the projector cannot receive the IR signal from the remote control due to the overly long distance or obstacles, you can connect th\ e cable to the IR remote control or the external IR transmitter (optional) via the WI\ RE input port to expand the working range of the remote control� • 3D Sync Out: 3D IR sync signal transmitter � Note: • When the terminal of the remote control cable is inserted to the wired control terminal of the projector, the projector will automatically switch to the wired control mode and cannot be controlled through the IR signal of the remote control. Disconnect the wired control terminal on the projector if you want to control through the IR signal of the remote control. • If the wired remote control cable or the external IR transmitter is inserted to the incorrect port, such as Trigger, the remote control or the IR transmitter may be damaged. Make sure whether the port is correct before insertion. DU6871/DW6851/DX6831 DLP Projector - User's Manual
19 Connecting to the Screen Trigger If your projection system includes the Electric projection screen and ot\ her 12V trigger device, you can connect these devices to the 12V trigger to output and configure the output 12V signal settings, such as automation and the aspect ration of 16:10 throu\ gh OSD control to Trigger� The projector will output 12V signals according to the current settings \ of the aspect ratio and trigger when turned on� You can use the signal to control the screen or device� Screen DU6871/DW6851/DX6831 DLP Projector - User's Manual
20 Connecting to the External HDBaseT Transmitter The projector has a built-in HDBaseT signal receiver� With the HDBaseT Transmitter (optional), the video, RS-232 and LAN signals can be sent to the proje\ ctor via a single RJ-45 cable� If the HDBaseT Transmitter you purchased supports the input and output of the IR remote control, the control signals from the IR remote control ca\ n be sent to the DU6871/DW6851/DX6831 projector via the RJ-45 cable� VGA INRJ45 Lan HDMIRS232RJ45 HDBaseT YPbPr VGA Cable DVD PlayerDVD Player Hub RS-232c RJ-45 Cat5e or above Control PC Control PC HDBaseT transmitter Projector Note: • The projector supports the video signal, R-232, IR remote control and the reception of the network control signals but do not support Power over Ethernet (PoE). • Set the Control->RS232->Channel on the OSD menu to HDBaseT if you want to use the external HDBaseT transmitter to send the RS232 command to the projector via the RJ45 cable and baud rate will switch to 9600. • If the command is sent via the HDBaseT transmitter, the longest transmission distance is 100 meters. The projection may be interrupted or interfered, or the control signal cannot be sent if the transmission distance is exceeded. • Use the RJ-45 Cat5e or above cable and avoid entwining. Entwining may cause damage, interfere signal transmission, reduce the transmission distance and degrade the image quality. DU6871/DW6851/DX6831 DLP Projector - User's Manual