Vivitek Projector DU6871 User Manual
Here you can view all the pages of manual Vivitek Projector DU6871 User Manual. The Vivitek manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 31
31 OSD Menu - PICTURE Picture Mode Contrast Hue Brightness Saturation Sharpness Color Noise Reduction < 100 > Enter Overscan Aspect Ratio Aut o Sy nc VGA Setup < Off > < 16:10 > Enter Execute INPUTSERVICEALIGNMENTCONTROLLAMPPICTURE < Video > < 100 > < 100 > < 100 > < 0 > < 15 > • Picture Model Use ◄► to select a picture model....
Page 32
![Page 32
32
• Color
Use ◄► to adjust the color temp of the projected image.
• Sharpness
Use ◄► to adjust the sharpness. The purpose of this adjustment is to change the
value of the high-frequency detail�
• Noise Reduction
Use ◄► to adjust the noise of the projected image. This function is suitable for
removing the noise of the image in interlaced scanning input� Generally, noise reduction
can lower the value of the high-frequency detail and make the image soft\
er�
• Aspect Ratio
This function allows the user...](http://img.usermanuals.tech/thumb/5166/99555/w300_projector_manual_8122_d-31.png "Page 32
32
• Color
Use ◄► to adjust the color temp of the projected image.
• Sharpness
Use ◄► to adjust the sharpness. The purpose of this adjustment is to change the
value of the high-frequency detail�
• Noise Reduction
Use ◄► to adjust the noise of the projected image. This function is suitable for
removing the noise of the image in interlaced scanning input� Generally, noise reduction
can lower the value of the high-frequency detail and make the image soft\
er�
• Aspect Ratio
This function allows the user...")
32 • Color Use ◄► to adjust the color temp of the projected image. • Sharpness Use ◄► to adjust the sharpness. The purpose of this adjustment is to change the value of the high-frequency detail� • Noise Reduction Use ◄► to adjust the noise of the projected image. This function is suitable for removing the noise of the image in interlaced scanning input� Generally, noise reduction can lower the value of the high-frequency detail and make the image soft\ er� • Aspect Ratio This function allows the user...
Page 33
33 OSD Menu - LAMP Mode Power Lamp 1 Status High Altitude Custom Power Level Enter Lamp 2 Status < -------- > < Off > Eco On Off INPUTSERVICEALIGNMENTCONTROLLAMPPICTURE • Mode Use the ◄► function to select the single-lamp or dual-lamp mode. Dual: Enable the dual-lamp projection mode� Lamp 1: Use Lamp 1 for projection� The system switches to Lamp 2 if Lamp 1 is abnormal in activation� Lamp 2: Use Lamp 2 for projection� The system switches to Lamp 1 if Lamp 2 is...
Page 34
![Page 34
34
• High Altitude
Use this function to control the cooling fan of the projector� You can set it to OFF or ON,
the default setting is OFF�
Normally, the projector can operate normally when this function is set to OFF � The
projector detects ambient temperature by default to regulate the cooling\
fan speed�
When the temperature rises, the cooling fan speeds up (with higher nois\
e) to exhaust
the internal heat energy out of the projector and ensure its normal oper\
ation� However,
the projector may...](http://img.usermanuals.tech/thumb/5166/99555/w300_projector_manual_8122_d-33.png "Page 34
34
• High Altitude
Use this function to control the cooling fan of the projector� You can set it to OFF or ON,
the default setting is OFF�
Normally, the projector can operate normally when this function is set to OFF � The
projector detects ambient temperature by default to regulate the cooling\
fan speed�
When the temperature rises, the cooling fan speeds up (with higher nois\
e) to exhaust
the internal heat energy out of the projector and ensure its normal oper\
ation� However,
the projector may...")
34 • High Altitude Use this function to control the cooling fan of the projector� You can set it to OFF or ON, the default setting is OFF� Normally, the projector can operate normally when this function is set to OFF � The projector detects ambient temperature by default to regulate the cooling\ fan speed� When the temperature rises, the cooling fan speeds up (with higher nois\ e) to exhaust the internal heat energy out of the projector and ensure its normal oper\ ation� However, the projector may...
Page 35
![Page 35
35
OSD Menu - ALIGNMENT
Projection Mode
Center Lens
Lens Control
Lens Memory
< Front >
Digital Alignment
Keystone
H/V Alignment
Enter
Enter
Execute
Enter
Enter
INPUTSERVICEALIGNMENTCONTROLLAMPPICTURE
< 0 >
• Projection Mode
Use the ◄► function to select a projection mode: Front, Rear, Ceiling + Front, Ceiling
+ Rear, UP and Down�
• Lens Control
Select this function to open the Lens Control menu for adjustment of Zoo\
m, Focus or
Shift. You can use the Enter...](http://img.usermanuals.tech/thumb/5166/99555/w300_projector_manual_8122_d-34.png "Page 35
35
OSD Menu - ALIGNMENT
Projection Mode
Center Lens
Lens Control
Lens Memory
< Front >
Digital Alignment
Keystone
H/V Alignment
Enter
Enter
Execute
Enter
Enter
INPUTSERVICEALIGNMENTCONTROLLAMPPICTURE
< 0 >
• Projection Mode
Use the ◄► function to select a projection mode: Front, Rear, Ceiling + Front, Ceiling
+ Rear, UP and Down�
• Lens Control
Select this function to open the Lens Control menu for adjustment of Zoo\
m, Focus or
Shift. You can use the Enter...")
35 OSD Menu - ALIGNMENT Projection Mode Center Lens Lens Control Lens Memory < Front > Digital Alignment Keystone H/V Alignment Enter Enter Execute Enter Enter INPUTSERVICEALIGNMENTCONTROLLAMPPICTURE < 0 > • Projection Mode Use the ◄► function to select a projection mode: Front, Rear, Ceiling + Front, Ceiling + Rear, UP and Down� • Lens Control Select this function to open the Lens Control menu for adjustment of Zoo\ m, Focus or Shift. You can use the Enter...
Page 36
![Page 36
36
• Lens Memory
This projector supports the lens zooming, focusing and lens shift memory\
function� Up
to 10 sets of settings can be stored� The name setup in the memory can be input from
the keyboard simulator� You can store the current lens position (H/V), zoom and focus,
use the Load Memory function to load the stored lens setting values� The projector will
adjust to the corresponding lens shift, zoom and focus settings automati\
cally �
Projection Mode
Center Lens
Lens Control
Lens Memory
<...](http://img.usermanuals.tech/thumb/5166/99555/w300_projector_manual_8122_d-35.png "Page 36
36
• Lens Memory
This projector supports the lens zooming, focusing and lens shift memory\
function� Up
to 10 sets of settings can be stored� The name setup in the memory can be input from
the keyboard simulator� You can store the current lens position (H/V), zoom and focus,
use the Load Memory function to load the stored lens setting values� The projector will
adjust to the corresponding lens shift, zoom and focus settings automati\
cally �
Projection Mode
Center Lens
Lens Control
Lens Memory
<...")
36 • Lens Memory This projector supports the lens zooming, focusing and lens shift memory\ function� Up to 10 sets of settings can be stored� The name setup in the memory can be input from the keyboard simulator� You can store the current lens position (H/V), zoom and focus, use the Load Memory function to load the stored lens setting values� The projector will adjust to the corresponding lens shift, zoom and focus settings automati\ cally � Projection Mode Center Lens Lens Control Lens Memory <...
Page 37
![Page 37
37
Change the name of the memory: The default name is Memory_number� You can
use the Back space button to delete the characters in the dialog box� The Caps
button is used to selected uppercase and lowercase characters. Use ▲▼◄► to
select the character and press the Enter button to confirm the input cha\
racter � The
maximum allowable 9 characters including texts, numbers, symbols and spa\
ces�
Cancel: Press the Cancel button to cancel the memory setting�
Accept: Press the Accept button to confirm the...](http://img.usermanuals.tech/thumb/5166/99555/w300_projector_manual_8122_d-36.png "Page 37
37
Change the name of the memory: The default name is Memory_number� You can
use the Back space button to delete the characters in the dialog box� The Caps
button is used to selected uppercase and lowercase characters. Use ▲▼◄► to
select the character and press the Enter button to confirm the input cha\
racter � The
maximum allowable 9 characters including texts, numbers, symbols and spa\
ces�
Cancel: Press the Cancel button to cancel the memory setting�
Accept: Press the Accept button to confirm the...")
37 Change the name of the memory: The default name is Memory_number� You can use the Back space button to delete the characters in the dialog box� The Caps button is used to selected uppercase and lowercase characters. Use ▲▼◄► to select the character and press the Enter button to confirm the input cha\ racter � The maximum allowable 9 characters including texts, numbers, symbols and spa\ ces� Cancel: Press the Cancel button to cancel the memory setting� Accept: Press the Accept button to confirm the...
Page 38
38 • Digital Alignment Projection Mode Center Lens Lens Control Lens Memory < Front > Digital Alignment Enter Keystone H/V Alignment Enter Enter Execute Enter INPUTSERVICEALIGNMENTCONTROLLAMPPICTURE < 0 > Digital Alignment Digital Zoom < 0 > Digital Pan < 0 > Digital Scan < 0 > Reset Execute Select this function to enlarge the projected...
Page 39
39 OSD Menu - CONTROL Standby Mode Auto Power off Network Auto Power On Startup Logo RS232 Trigger < Off > Enter Dynamic Black Auto Search Lan guage 3D < Off > < Off > Enter Enter INPUTSERVICEALIGNMENTCONTROLLAMPPICTURE < Standard > < Off > Enter < Off > < Off > • Standby Mode Use the ◄► function for "Standard" or "Eco" setting. Standard Model:...
Page 40
40 INPUTSERVICEALIGNMENTCONTROLLAMPPICTURE Network IP Address Subnet Gateway DHCP App ly < xxx.xxx.xxxx.xxx > < 255.255.255.0 > < xxx.xxx.xxxx.xxx > Off Apply Standby Mode Auto Power off Network Auto Power On Startup Logo RS232 Trigger < Off > Enter Dynamic Black Auto Search Lan guage 3D < Off > < Off > Enter Enter < Standard > < Off > Enter < Off > <...