Vivitek Projector DU6675 User Manual

31
Preventing the Unauthorized Use of the Projector
Using the Control Panel Lock
This function allows you to lock control panel on the projector; set it \
to On to lock the 
control panel. Otherwise, set it to off to unlock the control panel.
Using the Security Lock
The projector has a built-in security feature to lock the OSD control pa\
nel and deny remote 
control operation. The security feature has no default keyword; in the first instance of 
enabling the security feature, the user must define a...

32
Using the Physical Lock
If you are concerned about security, attach the projector to a permanent object with the 
Kensington slot and a security cable.
Getting Information
The Information screen provides details of the projector status such as \
lamp 
status,usage...etc. To access the Information, refer to the following guide.1.  Press MENU on the projector's OSD 
control panel or remote contro to 
display the Main Menu. Scroll to the 
Installation Information menu using 
▲or▼ and press.
2.  The...

33
Using On-Screen Display
Navigating the OSD
You can use the remote control or the buttons on the top of the projector\
 to navigate and 
make changes to the OSD. The following illustration shows the corresponding buttons on 
the remote control and on the projector.
1. To open the OSD, press the MENU 
button on the OSD control panel or 
remote control. There are five folders 
on  the  menu.  Press  the  cursor  ◄  or 
►  buttons  to  move  through  secondary 
menus.
2.  Press  ▲or▼  to  select  menu...

34
Menu Tree
Use the following table to quickly find a setting or determine the range for a setting.
Main MnuSubmenu
Picture Picture Mode
High Bright
Presentation
Video
Brightness
Contrast
Saturation
Hue
Sharpness
Color Temperature Native
6500K
7800K
9300K
Gamma 2.2
Film
Graphic
Video
PC
Auto Sync S Curve
Advance Setting Input BalanceRed Offset
Green Offset
Blue Offset
Red Gain
Green Gain
Blue Gain
HSG
Red
Green
Blue
Cyan
Magenta
Yellow
White
Noise Reduction
Dynamic Black On
Off
Signal Input Selection...

35
Main MnuSubmenu
Signal Auto
Native
Overscan Off
On
Background Blue
Black
Logo
SETUP Language
English, Français, Español, Deutsch, Português, 
简体中文, 
繁體中文 , 
日本語 , 
한국어
Lamp Mode Dual
Single
Lamp 1
Lamp 2
Lamp Power Normal
Eco
Customer Power level
Customer Power level
Keystone H Keystone
V Keystone
Digital Alignment Digital Zoom
Digital Pan
Digital Scan
Reset
H/V Alignment H Zoom
V Zoom
H Shift
V Shift
Reset
3D 3D FormatOff
Auto
Side by Side
Top/Bottom
Frame Sequential
DLP-Link On
off
3D Swap Normal...

36
Main MnuSubmenu
Installation RS232
Baud Rate38400, 19200, 9600
Channel Local
HDBaseT
Network IP Address
Subnet Mask
Gateway
DNS
DHCP On/Off
Apply No/Yes
MAC Address
Lens Control Zoom
Focus
Lens shift
Test Pattern Color Bar
Cross Hatch
Burst
H Ramp
Red
Green
Blue
White
Black
Off
Service Model
Serial Number
Software Version
Source Information
Active Source
Pixel Clock
Signal Format
H/V Refresh Rate
Sync Type
Sync Polarity
Scan Type
Video Type
Lamp Status Lamp 1On/Off
Lamp 2 On/Off
Usage Time Lamp 1 Life...

37
OSD Operation - PICTURE
Picture Mode
Use ◄ or ► to select a set of preset picture mode. High Bright : The highest brightness output mode is suitable for the occasion where high 
brightness is needed.
Presentation : The best image effect is suitable for the presentation or picture.
Video : The best picture mode is suitable for play of the video.
Brightness
Use ◄ or ►to increase or decrease the brightness of the image.
Contrast
Use ◄► to adjust the contrast of the projected image.
Note:
The brightness...

38
Sharpness
Use ◄► to adjust the sharpness. The purpose of this adjustment is to change the value of 
the high-frequency detail.
Color Temperature
Use ◄► to adjust the color temperature of the projected image, the option can be 6500K, 
7800K, 9300K and Native.
Gamma
When the ambient light is too bright and may affect the display of the details in the 
darker area of the image, you can select from the following gamma option\
s to adjust the 
chrominance of the image.2.2 : Set the chrominance correction...

39
HSG
HSG is a function to adjust Hue, Saturation and Gain independently, it allows for specified 
color adjustments that are more intuitive. You can adjust Hue, Saturation and Gain for Red, 
Green, Blue, Cyan, Magenta, Yellow and white independently.
Noise Reduction
Use ◄► to adjust the noise of the projected image. This function is suitable for removing 
the noise of the image in interlaced scanning input. Generally, noise reduction can lower 
the value of the high-frequency detail and make the image...

40
OSD Operation - SIGNAL
Input Selection
This function is same as the shortcut key on the remote control. You can use the remote 
control or this function to select the correct input source. VGA : Select input source to VGA.
BNC : Select Input source from BNC, the input source can be RGBHV or Compone\
nt 
signal from computer or component video enabled device.
DVI-D : Select input source from DVI-D output of the computer or media device.\
Video : Select input source from video output of the media...