Vivitek Projector D91X User Manual
Have a look at the manual Vivitek Projector D91X User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 263 Vivitek manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
DLP Projector—User’s Manual Advanced Feature Press the Menu button to open the OSD menu. Press ◄► to move to the Image menu. Press ▼▲ to move to the Advanced menu and then press Enter or ►. Press ▼▲ to move up and down in the Advanced menu. ITEM DESCRIPTION Brilliant Color Press the cursor ◄► button to enter and adjust the Brilliant Color value. Sharpness Press the cursor ◄► button to enter and adjust the display sharpness. Gamma Press the cursor ◄► button to enter and adjust the gamma correction of the display. Color Temperature Press the cursor ◄► button to enter and adjust the color temperature. Video AGC Press the cursor ◄► button to enter and enable or disable the Automatic Gain Control for video source. Video Saturation Press the cursor ◄► button to enter and adjust the video saturation. Video Tint Press the cursor ◄► button to enter and adjust the video tint/hue. — 22 —
DLP Projector—User’s Manual Color Manager Press the Menu button to open the OSD menu. Press ◄► to move to the Image menu. Press ▼▲ to move to the Color Manager menu and then press Enter or ►. Press ▼▲ to move up and down in the Color Manager menu. ITEM DESCRIPTION Red Select to enter the Red Color Manager. Press the ◄► buttons to adjust the Hue, Saturation, and Gain. Green Select to enter the Green Color Manager. Press the ◄► buttons to adjust the Hue, Saturation, and Gain. Blue Select to enter the Blue Color Manager. Press the ◄► buttons to adjust the Hue, Saturation, and Gain. Cyan Select to enter the Cyan Color Manager. Press the ◄► buttons to adjust the Hue, Saturation, and Gain. Magenta Select to enter the Magenta Color Manager. Press the ◄► buttons to adjust the Hue, Saturation, and Gain. Yellow Select to enter the Yellow Color Manager. Press the ◄► buttons to adjust the Hue, Saturation, and Gain. White Select to enter the White Color Manager. Press the ◄► buttons to adjust the Red, Green, and Blue. – 23 –
DLP Projector—User’s Manual Settings 1 Menu Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the Settings 1 menu. Press the cursor ▲▼ button to move up and down in the Settings 1 menu. Press ◄► to enter and change values for settings. ITEM DESCRIPTION Source Press the cursor ◄► button to enter the Source menu. Reference input Source select (IR / Keypad). Projection Press the cursor ◄► button to enter and choose from four projection methods: Aspect Ratio Press the cursor ◄► button to enter and adjust the video aspect ratio. Keystone Press the cursor ◄► button to enter and adjust the display keystone. Digital Zoom Press the cursor ◄► button to enter and adjust the Digital Zoom menu. Audio Press (Enter) / ► to enter the Audio menu. See Audio on page 25. Advanced 1 Press (Enter) / ► to enter the Advanced 1 menu. See Advanced 1 Feature on page 26. Advanced 2 Press (Enter) / ► to enter the Advanced 2 menu. See Advanced 2 Feature on page 28. — 24 —
DLP Projector—User’s Manual Audio Press the Menu button to open the OSD menu. Press ◄► to move to the Settings 1 menu. Press ▼▲ to move to the Audio menu and then press Enter or ►. Press ▼▲ to move up and down in the Audio menu. ITEM DESCRIPTION Volume Press the cursor ◄► button to enter and adjust the audio volume. Mute Press the cursor ◄► button to enter and turn on or off the speaker. – 25 –
DLP Projector—User’s Manual Advanced 1 Feature Press the Menu button to open the OSD menu. Press ◄► to move to the Settings 1 menu. Press ▲▼ to move to the Advanced 1 menu and then press Enter or ►. Press ▲▼ to move up and down in the Advanced 1 menu. Press ◄► to enter and change values for setting. ITEM DESCRIPTION Language Press the cursor ◄► button to enter and select a different localization Menu. Security Lock Press the cursor ◄► button to enter and enable or disable security lock function. Blank Screen Press the cursor ◄► button to enter and select different color to blank the screen. Closed Captioning Press the cursor ◄► button to enter and enable or disable Closed Captioning Keypad Lock Press the cursor ◄► button to enter and enable or disable keys can be work on keypad. Note : Hold the cursor ▼ button on keypad for 5 seconds to unlock keypad 3D Setting Press (Enter) / ►to enter the 3D menu. See page 27 for more information on 3D Setting. Note: To enjoy the 3D function, first enable the Play Movie in 3D setting found in your DVD device under the 3D Disc Menu. — 26 —
DLP Projector—User’s Manual 3D Setting ITEM DESCRIPTION 3D Press the cursor ◄► button to enter and select different 3D mode. 3D Sync Invert Press the cursor ◄► button to enter and enable or disable 3D Sync Invert. 3D Format Press the cursor ◄► button to enter and enable or disable different 3D Format. Note: 1. The 3D OSD menu item is gray if there is no appropriate 3D source. This is the default setting. 2. When the projector is connected to an appropria te 3D source, the 3D OSD menu item is enabled for selection. 3. Use 3D glasses to view a 3D image. 4. You need 3D content from a 3D DVD or 3D media file. 5. You need to enable the 3D source (some 3D DVD content may have a 3D on-off selection feature). 6. You need DLP link 3D or IR 3D shutter glasses. With IR 3D shutter glasses, you need to install a driver on your PC and connect a USB emitter. 7. The 3D mode of the OSD needs to match the type of glasses (DLP link or IR 3D). 8. Power on the glasses. Glasses normally have a power on -off switch. Each type of glasses has their own configuration instructions. Please follow the configuration instructions that come with your glasses to finish the setup process. Note: Since different types of glass (D LP link or IR shutter glass) have their own setting instructions, Please follow the guide to finish the setup process. – 27 –
DLP Projector—User’s Manual Advanced 2 Feature Press the Menu button to open the OSD menu. Press ◄► to move to the Settings 1 menu. Press ▲▼ to move to the Advanced 2 menu and then press Enter or ►. Press ▲▼ to move up and down in the Advanced 2 menu. Press ◄► to enter and change values for setting. ITEM DESCRIPTION Test Pattern Press the cursor ◄► button to enter and select internal test pattern. H Image Shift Press the cursor ◄► button to enter and select H Image Shift. V Image Shift Press the cursor ◄► button to enter and select V Image Shift. — 28 —
DLP Projector—User’s Manual Settings 2 Menu Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the Settings 2 menu. Press the cursor ▲▼ button to move up and down in the Settings 2 menu. ITEM DESCRIPTION Auto Source Press the cursor ◄► button to enter and enable or disable automatic source detection. No Signal Power Off (min.) Press the cursor ◄► button to enter and enable or disable automatic shutdown of lamp when no signal. Auto Power On Press the cursor ◄► button to enter and enable or disable automatic power On when AC power is supplied. Lamp Mode Press the cursor ◄► button to enter and select the lamp mode for higher brightness or lower brightness to save lamp life. Reset All Press (Enter) / ► to reset all settings to default values. Status Press (Enter) / ► to enter the Status menu. See page 30 for more information on Status . Advanced 1 Press (Enter) / ► to enter the Advanced 1 menu. See Advanced 1 Feature on page 31. Advanced 2 Press (Enter) / ► to enter the Advanced 2 menu. See Advanced 2 Feature on page 43. – 29 –
DLP Projector—User’s Manual Status Press the cursor ▲▼ button to move up and down in the Settings 2 menu. Select the Status menu and press Enter or ► to enter. ITEM DESCRIPTION Active Source Display the activated source. Video Information Displays resolution/video information for RGB source and color standard for Video source. Lamp Hours Lamp hour used information is displayed. ( ECO. and Normal) Serial Number Showing serial number of product. — 30 —
DLP Projector—User’s Manual Advanced 1 Feature Press the Menu button to open the OSD menu. Press ◄► to move to the Settings 2 menu. Press ▲▼ to move to the Advanced 1 menu and then press Enter or ►. Press ▲▼ to move up and down in the Advanced 1 menu. Press ◄► to enter and change values for setting. ITEM DESCRIPTION Menu Position Press the cursor ◄► button to enter and select different OSD location. Translucent Menu Press the cursor ◄► button to enter and select OSD background translucent level. Low Power Mode Press the cursor ◄► button to enter and turn Low Power Mode on or off. Fan Speed Press the cursor ◄► button to enter and toggle between Normal and High fan speeds. Note: We recommend selecting high speed in high temperatures, high humidity, or high altitude (higher than 1500m/4921ft) areas. Lamp Hour Reset After replacing the lamp, this item should be reset. See page 32 for more information on Lamp Hour Reset . Projector ID Press the cursor ◄► button to enter and adjust a two digit projector ID from 00 through 98. Network Press (Enter) / ► to enter the Network menu. See page 32 for more information on Network. – 31 –