Vivitek Projector D75XXWT User Manual

							DLP Projector—User’s Manual 
Color Manager 
Press the Menu button to open the OSD menu. Press  ◄► to move to the  Image menu. Press 
▼▲  to move to the  Color Manager menu and then press  Enter or ►. Press  ▼▲ to move up and 
down in the  Color Manager menu.  
 
ITEM DESCRIPTION 
Red  Select to enter the Red Color Manager.  
Press the 
◄► buttons to adjust the Hue, Saturation, and Gain. 
Green  Select to enter the Green Color Manager.  
Press the 
◄► buttons to adjust the Hue, Saturation, and Gain. 
Blue  Select to enter the Blue Color Manager.  
Press the 
◄► buttons to adjust the Hue, Saturation, and Gain. 
Cyan  Select to enter the Cyan Color Manager.  
Press the 
◄► buttons to adjust the Hue, Saturation, and Gain. 
Magenta  Select to enter the Magenta Color Manager.  
Press the 
◄► buttons to adjust the Hue, Saturation, and Gain. 
Yellow  Select to enter the Yellow Color Manager.  
Press the
◄► buttons to adjust the Hue, Saturation, and Gain. 
White  Select to enter the White Color Manager.  
Press the 
◄► buttons to adjust the Red, Green, and Blue. 
 
 
—  23—  
						

							DLP Projector—User’s Manual 
Settings 1 Menu  
Press the MENU button to open the  OSD menu. Press the cursor  ◄► button to move to the 
Settings 1  menu. Press the cursor  ▲▼ button to move up and down in the  Settings 1 menu. 
Press  ◄► to
 enter and change values for settings. 
 
ITEM DESCRIPTION 
Source  Press the cursor  (Enter) / ►
 button to enter the Source menu. Reference input 
Source select (IR / Keypad). 
Projection  Press the cursor ◄► button to enter and choose from four projection methods. 
Aspect Ratio  Press the cursor ◄► button to enter and adjust the video aspect ratio. 
Keystone  Press the cursor ◄► button to enter and adjust the display keystone. 
Digital Zoom   Press the cursor ◄► button to enter and adjust the Digital Zoom menu.  
Audio Press  (Enter) / ► to enter the Audio menu. See  Audio on page  25. 
Advanced 1  Press  (Enter) / 
► to enter the Advanced 1 menu. See  Advanced 1 Feature on 
page  26. 
Advanced 2  Press  (Enter) / 
► to enter the Advanced 2 menu. See  Advanced 2 Feature on 
page  28. 
 
—  24—  
						

							DLP Projector—User’s Manual 
Audio 
Press the Menu button to open the OSD menu. Press  ◄► to move to the  Settings 1 menu. 
Press  ▼▲ to move to the  Audio menu and then press  Enter or ►. Press  ▼▲ to move up and 
down in the  Audio menu. 
 
ITEM DESCRIPTION 
Volume Press  the ◄►  buttons to enter and adjust the audio volume.  
Mute Press  the ◄►  buttons to enter and turn on or off the speaker. 
 
— 25—  
						

							DLP Projector—User’s Manual 
Advanced 1 Feature 
Press the Menu button to open the OSD menu. Press  ◄► to move to the  Settings 1 menu. 
Press  ▲▼ to move to the  Advanced 1 menu and then press  Enter or ►. Press  ▲▼ to move up 
and down in the Advanced 1  menu. Press ◄► to enter and change values for setting. 
 
 
ITEM DESCRIPTION 
Language  Press the cursor ◄► button to enter and select a different localization Menu. 
Security Lock   Press the cursor ◄► button to enter and enable or disable security lock function. 
Blank Screen  Press the cursor ◄► button to enter and select different color to blank the screen. 
Splash Logo  Press the cursor ◄► button to enter and select splash logo. 
Closed Captioning  Press the cursor ◄► buttons to enter and enable or disable Closed Captioning 
Keypad Lock  Press the cursor 
◄► button to enter and enable or disable keys can be work on 
keypad. 
3D Setting  Press  (Enter) / 
► to enter the 3D menu. See page  27 for more information on  3D 
Setting. 
Logo Capture  Press  (Enter) / ► to capture screen pattern to Logo. 
Note:  
To enjoy the 3D function, first  enable the Play Movie in 3D setti ng found in your DVD device under 
the 3D Disc Menu. 
 
— 26—  
						

							DLP Projector—User’s Manual 
3D Setting 
 
ITEM DESCRIPTION 
3D Press the cursor ◄► button to enter and select different 3D mode. 
3D Sync Invert  Press the cursor ◄► button to enter and enable or disable 3D Sync Invert. 
3D Format  Press the cursor ◄► button to enter and enable or disable different 3D Format. 
 
Note: 
1. The 3D OSD menu item is gray if there is no  appropriate 3D source. This is the default setting. 
2.  When the projector is connected to an appropr iate 3D source, the 3D OSD menu item is enabled 
for selection. 
3. Use 3D glasses to view a 3D image. 
4.  You need 3D content from a 3D DVD or 3D media file. 
5.  You need to enable the 3D source (some 3D  DVD content may have a 3D on-off selection 
feature). 
6.  You need DLP link 3D or IR 3D shutter glasses. With IR 3D shutter glasses, you need to install a 
driver on your PC and connect a USB emitter. 
7.  The 3D mode of the OSD needs to match the type of glasses (DLP link or IR 3D). 
8.  Power on the glasses. Glasses normally have a power on -off switch.  
Each type of glasses has their own configuration instructions.  Please follow the configuration 
instructions that come with your glasses to finish the setup process. 
 
Note:  
Since different types of glass (D LP link or IR shutter glass) have their own setting instructions, 
Please follow the guide to finish the setup process. 
— 27—  
						

							DLP Projector—User’s Manual 
Advanced 2 Feature 
Press the Menu button to open the OSD menu. Press  ◄► to move to the  Settings 1 menu. 
Press  ▲▼ to move to the  Advanced 2 menu and then press  Enter or ►. Press  ▲▼ to move up 
and down in the Advanced 2  menu. Press ◄► to enter and change values for setting. 
 
ITEM DESCRIPTION 
Test Pattern  Press the cursor ◄► button to enter and select internal test pattern. 
H Image Shift  Press the cursor ◄► button to enter and select H Image Shift. 
V Image Shift  Press the cursor ◄► button to enter and select V Image Shift. 
 
— 28—  
						

							DLP Projector—User’s Manual 
Settings 2 Menu  
Press the MENU button to open the  OSD menu. Press the cursor  ◄► button to move to the 
Settings 2  menu. Press the cursor  ▲▼ button to move up and down in the  Settings 2 menu.  
 
ITEM DESCRIPTION 
Auto Source  Press the cursor 
◄► button to enter and enable or disable automatic source 
detection.  
No Signal Power 
Off (min.)  Press the cursor 
◄► button to enter and enable or disable automatic shutdown of 
lamp when no signal.  
Auto Power On  Press the cursor 
◄► button to enter and enable or disable automatic power On when 
AC power is supplied. 
Lamp Mode  Press the cursor 
◄► button to enter and select the lamp mode for higher brightness 
or lower brightness to save lamp life. 
Reset All  Press  (Enter) / ► to reset all settings to default values. 
Status  Press  (Enter) / 
► to enter the Status menu. See page  30 for more information on 
Status . 
Advanced 1  Press  (Enter) / 
► to enter the Advanced 1 menu. See  Advanced 1 Feature on 
page  31. 
Advanced 2  Press  (Enter) / 
► to enter the Advanced 2 menu. See  Advanced 2 Feature on 
page  42. 
—  29—  
						

							DLP Projector—User’s Manual 
Status 
Press the cursor ▲▼ button to move up and down in the  Settings 2 menu. Select the Status 
menu and press Enter or  ► to enter.
 
 
ITEM DESCRIPTION 
Active Source  Display the activated source. 
Video Information Displays resolution/video information for RGB source and color standard for Video 
source. 
Lamp Hours 
Lamp hour used information is displayed. ( Eco and Normal ) 
 
— 30—  
						

							DLP Projector—User’s Manual 
Advanced 1 Feature 
Press the Menu button to open the OSD menu. Press  ◄► to move to the  Settings 2 menu. 
Press  ▲▼ to move to the  Advanced 1 menu and then press  Enter or ►. Press  ▲▼ to move up 
and down in the Advanced 1  menu. Press ◄► to
 enter and change values for setting. 
 
ITEM DESCRIPTION 
Menu Position  Press ◄► button to enter and select different OSD location. 
Translucent Menu  Press ◄► button to enter and select OSD background translucent level.  
Low Power Mode  Press ◄► to enter and turn Low Power Mode on or off. 
Fan Speed  Press the cursor 
◄► button to enter and toggle between Normal and High fan 
speeds. 
Note: We recommend selecting high speed in high temperatures, high humidity, or 
high altitude (higher than 1500m/4921ft) areas. 
Lamp Hour Reset  After replacing the lamp, this item should be reset. See page 
32 for more information 
on  Lamp Hour Reset . 
Projector ID   Press the cursor 
◄► button to enter and adjust a two digit projector ID from 00 
through 98. 
RS232  Press 
◄► to select RS232 (remote) or Network (LAN) mode depending on projector 
connection method. 
Network  Press  (Enter) / 
► to enter the Network menu. See page  32 for more information on 
Network. 
 
— 31—  
						

							DLP Projector—User’s Manual 
Lamp Hour Reset 
 
Please refer to Resetting the Lamp  on page 46 to reset the lamp hour counter. 
 
Network 
 
ITEM DESCRIPTION 
Network State  Displays the network connection status. 
DHCP  Press 
◄► to turn DHCP On or Off. 
Note:  If you select DHCP Off, complete the IP  Address, Subnet Mask, Gateway, and 
DNS fields. 
IP Address   Enter a valid IP address if DHCP is turned off. 
Subnet Mask  Enter a valid Subnet Mask if DHCP is turned off. 
Gateway  Enter a valid Gateway address if DHCP is turned off. 
DNS Enter a valid DNS name if DHCP is turned off. 
Apply Press  (Enter) / ► to confirm settings. 
— 32—