Vivitek D935vx User Manual

DDDLLLPPP   PPPrrrooojjjeeeccctttooorrr   –––   UUUssseeerrr’’’sss   MMMaaannnuuuaaalll   
Computer Menu  
Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the Com-
puter menu. Press the cursor ▲▼ button to move up and down in the computer menu. Press ◄► to 
change values for settings. 
 
ITEM DESCRIPTION 
Horizontal Position Press the cursor ◄► button to adjust the display position to left or right.  
Vertical Position Press the cursor ◄► button to adjust the display...

DDDLLLPPP   PPPrrrooojjjeeeccctttooorrr———UUUssseeerrr’’’sss   MMMaaannnuuuaaalll   
Video/Audio Menu  
Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the 
Video/Audio menu. Press the cursor ▲▼ button to move up and down in the Video/Audio menu. 
Press ◄► to change values for settings. 
 
ITEM DESCRIPTION 
Video AGC Press the ◄► buttons to enable or disable the Automatic Gain Control for video source. 
Video Saturation Press the ◄► buttons to adjust the video...

DDDLLLPPP   PPPrrrooojjjeeeccctttooorrr   –––   UUUssseeerrr’’’sss   MMMaaannnuuuaaalll   
Audio 
Press  (Enter) / ► to enter the Audio sub menu. 
 
ITEM DESCRIPTION 
Volume Press the ◄► buttons to adjust the audio volume.  
(Range: 0 ~ 8) 
Mute Press the ◄► buttons to turn on or off the speaker. 
Audio Input Press the cursor ◄► button to select audio input.  
(Range: Mini ~ RCA) 
 
 
– 27 – 
Downloaded From projector-manual.com Vivitek Manuals 

DDDLLLPPP   PPPrrrooojjjeeeccctttooorrr———UUUssseeerrr’’’sss   MMMaaannnuuuaaalll   
Installation I Menu  
Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the Installa-
tion I menu. Press the cursor ▲▼ button to move up and down in the Installation I menu. Press 
◄► to change values for settings. 
 
ITEM DESCRIPTION 
Language Press the cursor ◄► button to select a different localization Menu. 
Blank Screen Press the cursor ◄► button to select different color to blank...

DDDLLLPPP   PPPrrrooojjjeeeccctttooorrr   –––   UUUssseeerrr’’’sss   MMMaaannnuuuaaalll   
Installation II Menu  
Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the Installa-
tion II menu. Press the cursor ▲▼ button to move up and down in the Installation II menu.  
 
ITEM DESCRIPTION 
Auto Source Press the cursor ◄► button to enable or disable automatic source detection. 
Auto Power Off 
(min.) Press the cursor ◄► button to enable or disable automatic shutdown of lamp...

DDDLLLPPP   PPPrrrooojjjeeeccctttooorrr———UUUssseeerrr’’’sss   MMMaaannnuuuaaalll   
Advanced Feature 
Press the Menu button to open the OSD menu. Press ◄► to move to the Installation II menu. 
Press ▲▼ to move to the Advanced menu and then press Enter or ►. Press ▲▼ to move up and 
down in the Advanced menu. Press ◄► to change values for setting. 
 
ITEM DESCRIPTION 
OSD Menu Setting Press  (Enter) / ► to enter the OSD setting menu. See page 31 for more information on 
OSD Menu Setting. 
Peripheral...

DDDLLLPPP   PPPrrrooojjjeeeccctttooorrr   –––   UUUssseeerrr’’’sss   MMMaaannnuuuaaalll   
OSD Menu Setting  
 
ITEM DESCRIPTION 
Menu Position Press ◄► button to select different OSD location. 
Translucent Menu Press ◄► button to select OSD background translucent level.  
Menu Display Press ◄► button to select OSD timeout delay. 
Peripheral Test 
 
ITEM DESCRIPTION 
Remote Control Test Press  (Enter) / ► to test the IR remote controller for diagnostic.  
USB Test Press  (Enter) / ► to test the USB...

DDDLLLPPP   PPPrrrooojjjeeeccctttooorrr———UUUssseeerrr’’’sss   MMMaaannnuuuaaalll   
Lamp Hour Reset 
 
Please refer to Resetting the Lamp on page 42 to reset the lamp hour counter. 
Network 
 
ITEM DESCRIPTION 
Network State Displays the network connection status. 
DHCP 
Press ◄► to turn DHCP On or Off.  
Note: If you select DHCP Off, complete the IP Address, Subnet Mask, Gateway, and DNS 
fields. 
IP Address  Enter a valid IP address if DHCP is turned off. 
Subnet Mask Enter a valid Subnet Mask if...

DDDLLLPPP   PPPrrrooojjjeeeccctttooorrr   –––   UUUssseeerrr’’’sss   MMMaaannnuuuaaalll   
The Network function enables remote management and display of projector functions such as Power 
On/Off, Brightness, Contrast, and projector status information over a network (LAN) or from a stand 
alone PC or notebook. 
To connect to a network (LAN), refer to the following steps: 
1. Connect an RJ45 cable to LAN ports on the projector and a router or hub on the network. 
 
2. Press the MENU button to open the OSD...

DDDLLLPPP   PPPrrrooojjjeeeccctttooorrr———UUUssseeerrr’’’sss   MMMaaannnuuuaaalll   
The Projector Web Server home page displays. In the example, the projector resides at IP 
address 192.168.0.2. 
 
7. Click Control Panel and make any desired changes to projector settings. 
 
– 34 – 
Downloaded From projector-manual.com Vivitek Manuals