Vivitek D861 User Manual

							DLP Projector—User’s Manual 
Projector Dimensions 
 
 
 
 
– 54 –  
						

							DLP Projector – User’s Manual 
– 55  – 
REGULATORY COMPLIANCE 
FCC Warning 
This equipment has been tested and found to comply wi th the limits for a Class B digital device pur-
suant to Part 15 of the FCC Rules. These lim its are designed to provide reasonable protection 
against harmful interference when the equipm ent is operated in a commercial environment. 
This equipment generates, uses, and  can radiate radio frequency energy and, if not installed and 
used in accordance with the instruction manual, ma y cause harmful interference to radio communica-
tions. Operation of this equipment  in a residential area is likely to cause harmful interference in which 
case the user will be required to correct  the interference at his/her own expense. 
Changes or modifications not expressly approved  by the parties responsible for compliance could 
void the user’s authority to operate the equipment. 
Canada 
This class B digital apparatus complies with Canadian ICES-003. 
Safety Certifications 
FCC-B, cUL, UL, CE, C-tick, CC C, KC, CB, PCT, NOM, SASO, PSB. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
  
						

							DLP Projector—User’s Manual 
– 56 – 
APPENDIX I 
RS-232C Protocol 
RS232 Setting 
Baud rate:  9600 
Parity 
check:  None 
Data bit: 
8 
Stop bit: 1 
Flow Con-
trol None 
Minimum delay for next command: 
1ms 
 
Control Command Structure        
                 
 
 
P1        P2 
Pin no.    Name  Pin no.
1    NC   1 
2    RXD  3 
3    TXD  2 
4    NC   4 
5    GND  5 
6    NC   6 
7    RTS  7 
8    CTS  8 
9    NC   9 
 
 
 
  
						

							DLP Projector – User’s Manual 
– 57  – 
Header code Command code Data code End code 
HEX   Command Data 0Dh 
ASCII  ｀V’ Command Data CR 
Operation Command 
Note: 
XX=00-98, projectors ID, XX=99 is for all projectors 
Return Result P=Pass / F=Fail 
n: 0:Disable/1: E nable/Value(0~9999)  
  
Command Group 00 
ASCII Function  Description Return Result 
VXXS0001 Power On    P/F 
VXXS0002 Power Off    P/F 
VXXS0003 Resync    P/F 
VXXG0004 Get Lamp Hours    Pn/F 
VXXS0005n  Set Air filter timer  n=0~999999  P/F 
VXXG0005 Get Air filter timer  n=0~999999 Pn/F 
VXXS0006 System Reset    P/F 
VXXG0007  Get System Status  0: Standby 
2:Operation 
3:Cooling  Pn/F 
VXXG0008 
Get F/W Version    Pn/F 
VXXG0009  Get Alter EMail    Pn/F 
VXXS0009n  Set Alter Email  [email protected] 
P/F  
Command Group 01 
ASCII Function  Description Return Value 
VXXG0101 Get Brightness  n=0~100 Pn/F 
VXXS0101n Set Brightness  n=0~100 P/F 
VXXG0102 Get Contrast  n=0~100 Pn/F 
VXXS0102n Set Contrast  n=0~100 P/F 
VXXG0103 Get Color  n=0~100 Pn/F 
VXXS0103n Set Color  n=0~100 P/F 
VXXG0104 Get Tint  n=0~100 Pn/F 
VXXS0104n Set Tint  n=0~100 P/F 
VXXG0105 Get Sharpness  0~31 Pn/F 
VXXS0105n Set Sharpness  0~31 P/F 
VXXG0106 Get Color Temperature  0:Cold 
1:Normal  
2:Warm Pn/F 
VXXS0106n 
Set Color Temperature  0:Cold 
1:Normal  
2:Warm P/F  
						

							DLP Projector—User’s Manual 
– 58 – 
VXXG0107 Get Gamma  0:PC 
1:MAC 
2:Video 
3:Chart 
4: B&W Pn/F 
VXXS0107n Set Gamma  0:PC 
1:MAC 
2:Video 
3:Chart 
4: B&W P/F 
 
Command Group 02 
ASCII Function 
Description Return Value 
VXXS0201 Select RGB    P/F 
VXXS0202 Select RGB2    P/F 
VXXS0203 Select DVI    P/F 
VXXS0204 Select Video    P/F 
VXXS0205 Select S-Video    P/F 
VXXS0206 Select HDMI    P/F 
VXXS0207 Select BNC    P/F 
VXXS0208 Select Component    P/F 
VXXS0209  Select HDMI 2    P/F 
VXXG0220  Get Current Source 
Return 
1:RGB 
2:RGB2 
3:DVI 
4:Video 
5:S-Video 
6:HDMI 
7:BNC 
8:Component 
9:HDMI 2 
Pn/F 
 
Command Group 03 
ASCII Function  Description Return Value 
VXXG0301 Get Scaling  0: Fill 
1: 4:3 
2: 16:9 
3 :Letter Box 
4 :Native Pn/F 
VXXS0301n Set Scaling  0: Fill 
1: 4:3 
2: 16:9 
3 :Letter Box 
4 :Native P/F 
VXXG0302 Blank 
  Pn/F 
VXXS0302n Blank    P/F 
VXXG0303  Auto Keystone On    Pn/F 
VXXS0303n  Auto Keystone On    P/F 
VXXG0304 Freeze On    Pn/F 
VXXS0304n Freeze On    P/F  
						

							DLP Projector – User’s Manual 
– 59  – 
VXXG0305 Volume  n=0~8 Pn/F 
VXXS0305n Volume  n=0~8 P/F 
VXXG0306 Treble  n=0~16 Pn/F 
VXXS0306n Treble  n=0~16 P/F 
VXXG0307 Bass  n=0~16 Pn/F 
VXXS0307n Bass  n=0~16 P/F 
VXXG0308 Projection Mode  0:Front 
1:Rear 
2:Ceiling 
3:Rear+Ceiling Pn/F 
VXXS0308n Projection Mode  0:Front 
1:Rear 
2:Ceiling 
3:Rear+Ceiling P/F 
VXXG0309 
Set vertical keystone value  n= -30~30 Pn/F 
VXXS0309n Set vertical keystone value  n= -30~30  P/F 
VXXG0310 Set horizontal keystone value  n=-20~+20 Pn/F 
VXXS0310n Set horizontal keystone value n=-20~+20  P/F 
VXXG0311 Adjust the zoom  n=-10~10 Pn/F 
VXXS0311n Adjust the  zoom n=-10~10 P/F 
VXXG0312 Adjust the focus  n=-20~+20 Pn/F 
VXXS0312n Adjust the focus  n=-20~+20 P/F 
VXXG0313 Adjust the vertical lens shift  n=-20~+20 Pn/F 
VXXS0313n Adjust the vertical  lens shift n=-20~+20 P/F 
VXXG0314 Adjust the horizontal  lens shift n=-20~+20 Pn/F 
VXXS0314n Adjust the horizontal lens shift n=-20~+20 P/F  
Command Group 04 (Remote Control) 
ASCII Function  Description Return Value 
VXXS0401 UP arrow    P/F 
VXXS0402 DOWN arrow    P/F 
VXXS0403 LEFT arrow    P/F 
VXXS0404 RIGHT arrow    P/F 
VXXS0405 POWER    P/F 
VXXS0406 EXIT    P/F 
VXXS0407 INPUT    P/F 
VXXS0408 AUTO    P/F 
VXXS0409 KEYSTONE+    P/F 
VXXS0410 KEYSTONE-    P/F 
VXXS0411 MENU    P/F 
VXXS0412 STATUS    P/F 
VXXS0413 MUTE    P/F 
VXXS0414 ZOOM+    P/F 
VXXS0415 ZOOM-    P/F  
						

							DLP Projector—User’s Manual 
– 60 – 
VXXS0416 BLANK    P/F 
VXXS0417 FREEZE    P/F 
VXXS0418 VOLUME+    P/F 
VXXS0419 VOLUME-    P/F 
VXXS0420 Enter    P/F