Vivitek D556 User Manual

DLP Projector—User’s Manual 
Audio 
Press the Menu button to open the OSD menu. Press  ◄► to move to the  Settings 1 menu. Press  ▼
▲ to move to the  Audio menu and then press  Enter or ►. Press  ▼▲ to move up and down in the 
Audio menu. 
 
ITEM DESCRIPTION 
Volume Press  the ◄►  buttons to enter and adjust the audio volume.  
Mute Press  the ◄►  buttons to enter and turn on or off the speaker. 
 
– 23  –  

DLP Projector—User’s Manual 
Advanced 1 Feature 
Press the Menu button to open the OSD menu. Press  ◄► to move to the  Settings 1 menu. Press  ▲
▼ to move to the  Advanced 1 menu and then press  Enter or ►. Press  ▲▼ to move up and down in 
the  Advanced 1  menu. Press  ◄► to enter and change values for setting. 
 
ITEM DESCRIPTION 
Language  Press the cursor ◄► button to enter and select a different localization Menu. 
Security Lock   Press the cursor ◄► button to enter and enable or disable security...

DLP Projector—User’s Manual 
3D Setting 
 
ITEM DESCRIPTION 
3D Press the cursor ◄► button to enter and select different 3D mode. 
3D Sync Invert  Press the cursor ◄► button to enter and enable or disable 3D Sync Invert. 
3D Format  Press the cursor ◄► button to enter and enable or disable different 3D Format.  
 
Note: 
1.  The 3D OSD menu item is gray if there is no appropriate 3D source. This is the default setting. 
2.  When the projector is connected to an appropria te 3D source, the 3D OSD menu...

DLP Projector—User’s Manual 
Advanced 2 Feature 
Press the Menu button to open the OSD menu. Press  ◄► to move to the  Settings 1 menu. Press  ▲
▼ to move to the  Advanced 2 menu and then press  Enter or ►. Press  ▲▼ to move up and down in 
the  Advanced 2  menu. Press  ◄► to enter and change values for setting. 
 
ITEM DESCRIPTION 
Test Pattern  Press the cursor ◄► button to enter and select internal test pattern. 
H Image Shift  Press the cursor ◄► button to enter and select H Image Shift. 
V Image...

DLP Projector—User’s Manual 
Settings 2 Menu  
Press the MENU button to open the  OSD menu. Press the cursor  ◄► button to move to the 
Settings 2  menu. Press the cursor  ▲▼ button to move up and down in the  Settings 2 menu.  
 
ITEM DESCRIPTION 
Auto Source  Press the cursor ◄► button to enter and enable or disa ble automatic source detection.  
No Singal Power Off 
(min.) Press the cursor ◄►
 button to enter and enable or disabl e automatic shutdown of lamp when 
no signal.  
Auto Power On  Press the...

DLP Projector—User’s Manual 
Status 
Press the cursor ▲▼ button to move up and down in the  Settings 2 menu. Select the Status menu 
and press  Enter or ► to enter.
 
 
ITEM DESCRIPTION 
Active Source  Display the activated source. 
Video Information  Displays resolution/video information for RGB source and color standard for Video source. 
Lamp Hours  Lamp hour used information is displayed. ( Std. and Boost ) 
 
— 28 —  

DLP Projector—User’s Manual 
Advanced 1 Feature 
Press the Menu button to open the OSD menu. Press  ◄► to move to the  Settings 2 menu. Press  ▲
▼ to move to the  Advanced 1 menu and then press  Enter or ►. Press  ▲▼ to move up and down in 
the  Advanced 1  menu. Press  ◄► to
 enter and change values for setting. 
 
ITEM DESCRIPTION 
Menu Position  Press ◄► button to enter and select different OSD location. 
Translucent Menu  Press ◄► button to enter and select OSD background translucent level.  
Low...

DLP Projector—User’s Manual 
Lamp Hour Reset 
 
Please refer to Resetting the Lamp  on page 36 to reset the lamp hour counter. 
 
—  30 —  

DLP Projector—User’s Manual 
Advanced 2 Feature 
Press the Menu button to open the OSD menu. Press  ◄► to move to the  Settings 2 menu. Press  ▲
▼ to move to the  Advanced 2 menu and then press  Enter or ►. Press  ▲▼ to move up and down in 
the  Advanced 2  menu. Press  ◄► to
 enter and change values for setting. 
 
ITEM DESCRIPTION 
Sleep Timer  Press the cursor ◄►
 buttons to enter and set Sleep timer. The projector automatically turns off 
after the preset period of time. 
Source Filter  Press Enter/...

DLP Projector—User’s Manual 
Source Filter 
Press the ENTER button to enter the  Source Filter sub menu. 
 
ITEM DESCRIPTION 
VGA1 Press  the ◄►  buttons to enter and enable or disable the VGA1 source. 
VGA2 (*)  Press the ◄► buttons to enter and enable or disable the VGA2 source. 
Composite Video (*)  Press the ◄► buttons to enter and enable or disable the Composite Video source. 
S-Video (*)  Press the ◄► buttons to enter and enable or disable the S-Video source. 
HDMI (*)  Press the ◄► buttons to...