Vivitek D551 User Manual

							DLP Projector—User’s Manual 
Adjusting the Projector Level 
Take note of the following when setting up the projector: 
  The projector table or stand should be level and sturdy. 
   Position the projector so that it is perpendicular to the screen. 
   Ensure the cables are in a safe location. You could trip over them.  
 
To adjust the angle of the picture, turn the tilt- adjuster right or left until the desired angle has 
been achieved. 
 
 
 
 
–  13  –  
						

							DLP Projector—User’s Manual 
Adjusting the Zoom, Focus and Keystone 
1.  Use the Image-zoom   
control (on the projector 
only) to resize the 
projected image and 
screen size 
. 
2.  Use the  Image-focus   
control (on the projector 
only) to sharpen the 
projected image 
. 
 
3.  Use the  KEYSTONE  
buttons the remote control 
to correct image-trapezoid 
(wider top or bottom) 
effect. 
 
4.  The keystone control 
appears on the display. 
Adjusting the Volume 
 
1.  Press the  Volume +/-  
buttons on the remote 
control.  
The volume control 
appears on the display. 
2.  Press the  MUTE button to 
turn off the volume. (This 
feature is available only on 
the remote).  
Note :  Available in 
different model  
 
—  14
  —  
						

							DLP Projector—User’s Manual 
– 15  – 
ON-SCREEN DISPLAY (OSD) MENU SETTINGS 
OSD Menu Controls 
The projector has an OSD that lets you ma ke image adjustments and change various settings.  
Navigating the OSD 
You can use the remote contro l cursor buttons to navigate and make changes to the OSD.  
2
MenuPower
Vo l u m e
Freeze
Auto Source
1
1
3
4 5
1
3
2
14
5
Mute
 
1.  To enter the OSD, press the  MENU button.  
2.  There are three menus.  Press the cursor ◄►  button 
to move through the menus.  
3. Press the cursor  ▲▼ button 
to move up and down in a 
menu.  
4. Press  ◄► to change values 
for settings. 
5. Press  MENU to close the 
OSD or leave a submenu. 
 
Note: 
Depending on the video source, not all items in  the OSD are available. For example, the 
Horizontal/Vertical Position  items in the Computer menu can only be modified when connected 
to a PC. Items that are not availabl e cannot be accessed and are grayed out.  
  
						

							DLP Projector—User’s Manual 
Setting the OSD Language 
Set the OSD language to your preference before continuing. 
1.  Press the  MENU button. Press the cursor  ◄► button to navigate to  Settings 1. Press the cursor 
▲▼  button to move to the Advanced  1  menu. 
 
2.   Press  (Enter) /  ► to enter the  Advanced 1  sub menu. Press the cursor ▲▼  button until 
Language  is highlighted.  
 
3.  Press the cursor button until the language you want is highlighted.  
4.   Press the  MENU button four times to close the OSD.   
 
—  16 —  
						

							DLP Projector—User’s Manual 
OSD Menu Overview 
Use the following illustration to quickly find a setting or determine the range for a setting. 
Image
Settings 1
Off, OnBlank, Red, Green, Blue, WhiteOff, On
Off, On3D3D Sync Invert3D Format
HueSaturation
English, Français, Deutsch, Español, Português, 簡体中文,  繁體中文, Italiano, Norsk, 
Svenska, Nederlands,  Русский, Polski, Suomi,  Ελληνικά, 한국어, Magyar,  Čeština,  اﻟﻌﺮﺑﻴﺔ, 
Türkçe, Vi ệt,  日本語 , ไทย ,  ﻓﺎرﺳﯽ,  תירבע
Off, On
Gain
1.8, 2.0, 2.2, 2.4, B&W, Linear
HueSaturationGainHueSaturationGainHueSaturationGainHueSaturationGainHueSaturationGainRedGreenBlue
Reference Input Source Select (IR/Keypad)
None, Grid, White, Red, Green, Blue, Black
Settings 2
Center, Down, Up, Left, Right0%, 25%, 50%, 75%, 100%Off, On
0-98
Normal, High
Display ModeBrightness
Auto Image
ComputerContrast
Advanced
Color Manager
Source
Aspect RatioProjection
AudioDigital ZoomKeystone
Advanced 1
Advanced 2
Auto Source
Auto Power OnNo Signal Power Off
StatusReset AllLamp Mode
Advanced 1
Advanced 2
Volume
Security LockBlank ScreenSplash Logo
Keypad Lock3D Setting
Horizontal PositionVertical PositionFrequencyTracking
Red
Language
Closed Captioning
Green
Blue
Cyan
Magenta
Yellow
White
Source
Mute
Test PatternH Image ShiftV Image Shift
Off, On
Menu PositionTranslucent MenuLow Power Mode
Lamp Hour ResetProjector ID
Fan Speed
Off, On
Sleep TimerSource Filter
Std. , Boost
VGA1VGA2 (*)Composite Video (*)S-Video (*)HDMI (*)
Normal, Real, Ceiling, Real+CeilingFill, 4:3, 16:9, Letter Box, Native, 2.35:1
Presentation, Bright, Game, Movie, TV, sRGB, Blackboard, User
Off, OnFrame Sequential, Top/Bottom, Side-By-Side, Frame Packing 
(3D FramePacking HDMI source only)
Off, DLP-Link, IR
Disable, EnableDisable, EnableDisable, EnableDisable, EnableDisable, Enable 
Note: 
(*) Not available in some model. 
– 17  –  
						

							DLP Projector—User’s Manual 
Image Menu  
Attention !   
All of display mode parameters when changed will be saved to user mode.  
Press the MENU button to open the  OSD menu. Press the cursor  ◄► button to move to the  Image 
Menu. Press the cursor  ▲▼ button to move up and down in the  Image menu. Press  ◄► to enter 
and change values for settings. 
 
ITEM DESCRIPTION 
Display Mode  Press the cursor ◄► button to enter and set the Display Mode.  
Brightness  Press the cursor ◄► button to enter and adjust the display brightness. 
Contrast  Press the cursor ◄► button to enter and adjust the display contrast. 
Computer  Press  (Enter) / ► to enter the Computer menu. See  Computer Menu on page 19. 
Auto Image  Press  (Enter) / ► to automatically adjustment for phase, tracking, size and position. 
Advanced Press  (Enter) / ► to enter the Advanced menu. See  Advanced Feature  on page  20. 
Color Manager  Press  (Enter) / 
► to enter the color manager menu. See page  21 for more information on 
Color Manager . 
— 18 —  
						

							DLP Projector—User’s Manual 
Computer Menu 
Press the MENU button to open the  OSD menu. Press  ◄► to move to the  Image menu. Press  ▲▼ 
to move to the  Computer menu and then press  Enter or ►. Press  ▲▼ to move up and down in the 
Computer  menu. 
 
ITEM DESCRIPTION 
Horizontal Position  Press the cursor ◄► button to enter and adjust the display position to left or right.  
Vertical Position  Press the cursor ◄► button to enter and adjust the display position to up or down.  
Frequency  Press the cursor ◄► button to enter and adjust the A/D sampling clock. 
Tracking  Press the cursor ◄► button to enter and adjust the A/D sampling dot. 
 
– 19  –  
						

							DLP Projector—User’s Manual 
Advanced Feature 
Press the Menu button to open the OSD menu. Press  ◄► to move to the  Image menu. Press  ▼▲ 
to move to the  Advanced menu and then press  Enter or ►. Press  ▼▲ to move up and down in the 
Advanced  menu. 
 
ITEM DESCRIPTION 
Brilliant Color  Press the cursor ◄► button to enter and adjust the Brilliant Color value. 
Sharpness  Press the cursor ◄► button to enter and adjust the displaySharpness. 
Gamma  Press the cursor ◄► button to enter and adjust the gamma correction of the display. 
Color Temperature 
Press the cursor ◄► button to enter and adjust the color temperature. 
Video AGC  Press the 
◄► buttons to enter and enable or disable the Automatic Gain Control for video 
source. 
Video Saturation  Press the ◄► buttons to enter and adjust the video saturation. 
Video Tint  Press the ◄► buttons to enter and adjust the video tint/hue. 
 
— 20 —  
						

							DLP Projector—User’s Manual 
Color Manager 
Press the Menu button to open the OSD menu. Press  ◄► to move to the  Image menu. Press  ▼▲ 
to move to the  Color Manager  menu and then press  Enter or ►. Press  ▼▲ to move up and down in 
the  Color Manager  menu.  
 
ITEM DESCRIPTION 
Red  Select to enter the Red Color Manager.  
Press the 
◄► buttons to adjust the Hue, Saturation, and Gain. 
Green  Select to enter the Green Color Manager.  
Press the 
◄► buttons to adjust the Hue, Saturation, and Gain. 
Blue  Select to enter the Blue Color Manager.  
Press the 
◄► buttons to adjust the Hue, Saturation, and Gain. 
Cyan  Select to enter the Cyan Color Manager.  
Press the 
◄► buttons to adjust the Hue, Saturation, and Gain. 
Magenta  Select to enter the Magenta Color Manager.  
Press the 
◄► buttons to adjust the Hue, Saturation, and Gain. 
Yellow  Select to enter the Yellow Color Manager.  
Press the
◄► buttons to adjust the Hue, Saturation, and Gain. 
White  Select to enter the White Color Manager.  
Press the 
◄► buttons to adjust the Red, Green, and Blue. 
 
 
–  21  –  
						

							DLP Projector—User’s Manual 
Settings 1 Menu  
Press the MENU button to open the  OSD menu. Press the cursor  ◄► button to move to the 
Settings 1  menu. Press the cursor  ▲▼ button to move up and down in the  Settings 1 menu. Press 
◄►  to
 enter and change values for settings. 
 
ITEM DESCRIPTION 
Source  Press the cursor ◄►
 button to enter the Source menu. Reference input Source select 
(IR / Keypad). 
Projection  Press the cursor ◄► button to enter and choose from four projection methods: 
Aspect Ratio  Press the cursor ◄► button to enter and adjust the video aspect ratio. 
Keystone  Press the cursor ◄► button to enter and adjust the display keystone. 
Digital Zoom   Press the cursor ◄► button to enter and adjust the Digital Zoom menu.  
Audio Press  (Enter) /  ► to enter the Audio menu. See  Audio on page  23. 
Advanced 1  Press  (Enter) / ► to enter the Advanced 1 menu. See  Advanced 1 Feature on page 24. 
Advanced 2  Press  (Enter) / ► to enter the Advanced 2 menu. See  Advanced 2 Featureon page 26. 
 
— 22 —