Vivitek D5000 User Manual

DLP Projector—User’s Manual 
– 34 – 
Installation I Menu  
Press the  MENU
 button to open the  OSD
 menu. Press the cursor  ◄► button to move to the  Installa-
tion I  menu. Press the cursor  ▲▼ button to move up and down in the  Installation I
 menu. Press 
◄►  to change values for settings. 
 
ITEM DESCRIPTION 
Language Press the cursor  ◄► button to select a different localization Menu. 
Blank Screen  Press the cursor  ◄► button to select different color to blank the screen. 
Projection Press the...

DLP Projector – User’s Manual 
– 35  – 
Advanced 
Press  (Enter) /  ► to enter the  Advanced
 sub menu. 
 
ITEM DESCRIPTION 
Security Lock   Press the cursor  ◄► button to enable or disable security lock function. 
Wall Color  Press the cursor  ◄► button to select different wall color settings. 
Presentation Timer  Press  (Enter) /  ► to enter the Presentation menu. See  Presentation Timer on page 38. 
Logo Press the cursor  ◄► button to select the screen to display during startup. 
Logo Capture  Press...

DLP Projector—User’s Manual 
– 36 – 
Presentation Timer 
Press  (Enter) /  ► to enter the  Presentation Timer
 sub menu.  
 
ITEM DESCRIPTION 
Timer Press the cursor  ◄► button to enable or disable presentation timer function. 
Timer Period  Press the cursor  ◄► button to adjust the display timer period. 
Timer Reset  Press  (Enter) /  ► to reset presentation timer counter. 
 
Downloaded From projector-manual.com Vivitek Manuals 

DLP Projector – User’s Manual 
– 37  – 
Installation II Menu  
Press the  MENU
 button to open the  OSD
 menu. Press the cursor  ◄► button to move to the  Installa-
tion II  menu. Press the cursor  ▲▼ button to move up and down in the Installation II menu.  
 
ITEM DESCRIPTION 
Auto Source  Press the cursor  ◄► button to enable or disable automatic source detection. (Range: On ~ Off)
Auto Power Off 
(min.)  Press the cursor 
◄► button to enable or disable automatic shutdown of lamp when no signal....

DLP Projector—User’s Manual 
– 38 – 
Advanced Feature 
Press the  Menu
 button to open the  OSD
 menu. Press  ◄► to move to the  Installation II
 menu. 
Press  ▲▼ to move to the  Advanced
 menu and then press  Enter
 or ►. Press  ▲▼ to move up and 
down in the  Advanced
 menu. Press  ◄► to change values for setting. 
 
ITEM DESCRIPTION 
OSD Menu Setting  Press Enter / 
► to enter the OSD setting menu. See page 39 for more information on  OSD 
Menu Setting . 
Peripheral Test  Press Enter/ 
► to enter the...

DLP Projector – User’s Manual 
– 39  – 
OSD Menu Setting  
 
ITEM DESCRIPTION 
Menu Position  Press  ◄► button to select different OSD location. 
Translucent Menu  Press  ◄► button to select OSD background translucent level.  
Menu Display  Press  ◄► button to select OSD timeout delay. 
 
Peripheral Test 
 
ITEM DESCRIPTION 
Remote Control Test  Press  (Enter) /  ► to test the IR remote controller for diagnostic.  
Color Test  Press  (Enter) /  ► to select different colors on screen. 
Button Test  Press...

DLP Projector—User’s Manual 
– 40 – 
Lamp Hour Reset 
 
Please refer to  Resetting the Lamp  on page 48 to reset the lamp hour counter. 
 
3D 
 
When the 3D function is enabled, the current picture mode adjustment will be disabled. 
 
Downloaded From projector-manual.com Vivitek Manuals 

DLP Projector – User’s Manual 
– 41  – 
Network 
 
ITEM DESCRIPTION 
Network State  Displays the network connection status. 
DHCP  Press 
◄► to turn DHCP On or Off.  
Note:  If you select DHCP Off, complete the IP Address, Subnet Mask, Gateway, and DNS 
fields. 
IP Address   Enter a valid IP address if DHCP is turned off. 
Subnet Mask  Enter a valid Subnet Mask if DHCP is turned off. 
Gateway  Enter a valid Gateway address if DHCP is turned off. 
DNS  Enter a valid DNS name if DHCP is turned off. 
Apply...

DLP Projector—User’s Manual 
– 42 – 
For simplicity and ease of operation, the projector provides diverse networking and remote management 
features. 
The LAN/RJ45 function of the projector through a network, such as remotely manage: Power On/Off, 
Brightness and Contrast settings. Also, projector status information, such as: Video-Source, Sound-Mute, 
etc
. 
 
LAN_RJ45 
1.  Connect an RJ45 cable to RJ45 ports on the projector and the PC (Laptop). 
 
2.  On the PC (Laptop), select  Start → Control...

DLP Projector – User’s Manual 
– 43  – 
3. Right-click on  Local Area Connection , and select Properties. 
 
4. In the  Properties  window, select the  General tab, and select  Internet Protocol (TCP/IP) . 
5. Click  Properties . 
 
6. Click  Use the following IP address  and fill in the IP address and Subnet mask, then click  OK. 
 
Downloaded From projector-manual.com Vivitek Manuals