Vivitar Vs27g Users Manual

Downloaded from www.Manualslib.com manuals search engine  
  10 
2. Press the Shutter button till the  icon appears in the top left icon area of Preview 
Screen.  
3. Press the Menu button again to save the choice and exit the menu. 
4. The 3 Continuous Shots icon now appears in the top left corner of the Preview 
Screen. 
5. Press the Shutter button. The camera will now automatically take 3 continuous photos 
one after the other.  
The updated number of photos that can still be taken appear for a short...

Downloaded from www.Manualslib.com manuals search engine  
  11 
3. The sequence number and the total number of files currently stored appear on the 
bottom left of the Preview Screen.  
4. Press the Up and Down buttons to go to the previous or the next file. 
5. Press the Playback button again to exit the Playback mode     
 
     Video Playback 
     Video clips (AVI) appear with the   icon on the top left corner of the Preview Screen.  
 Press the Shutter button to play the video and press it again...

Downloaded from www.Manualslib.com manuals search engine  
  12 
2.     Press the Up / Down button to select the resolution setting icon. 3.     If the icon appears with 3 stars this means the current resolution setting is 2.0M (1600
×1280). 
4.     If the icon appears with 2 stars   this means the current resolution setting is 1.3M (1280x1024). 
5.    Press the Shutter button until the  icon with 1 star appears to change the resolution to VGA (640x480).  6.    Press the Menu button to save the setting...

Downloaded from www.Manualslib.com manuals search engine  
  13 
      Number of photos that can be taken with the Resolution and Compression setting selected:  
 
 
 
 
 
 
Frequency Setting  The camera has 2 Frequency settings: 
    60Hz  
    50Hz  
Set the camera for the correct frequency according to the current frequency in the area 
where you are: 
1. Press the Menu button once to enter the menu.  
2. Press the Up /Down buttons to select the frequency setting icon.  If the   icon 
appears this...

Downloaded from www.Manualslib.com manuals search engine  
  14 
Delete 
 Delete All 1. Press the Menu button once to enter the menu.  
2. Press the Up / Down buttons to select the Delete All icon  .  
3. Press the Shutter button once for the delete confirmation screen to appear. 
4. Press the Up / Down buttons to select “Yes” or “No”. 
5. If „Yes‟, press the Shutter button to confirm deletion. This will erase all files stored on 
the camera. 
6. If „No‟, the camera will revert to the main menu icons...

Downloaded from www.Manualslib.com manuals search engine  
  15 
Power Off        
Press the Power/Menu button (holding it down for 2 seconds) to switch the camera off.  
Energy Save Mode: 
To conserve battery power, if the camera is not in use for 60 seconds, it will automatically 
switch off. 
 
 
 
Install the Vivitar Experience Image Manager Software – 
TARGET Edition   
Warning: Do not plug your camera into the computer until the Vivitar Experience 
Image Manager – TARGET Edition software...

Downloaded from www.Manualslib.com manuals search engine  
  16 
5. Follow all instructions. 
6. On PC: Click the “Close” button when the installation is complete.  
The application automatically opens. 
On Macintosh: Click the “Quit” button when the installation is complete. 
7. If you closed the application, click on the Vivitar Experience Image Manager – TARGET 
Edition desktop icon (PC) or from the Programs or Applications menu on your computer to 
open and run the application. 
 
Connect your camera...

Downloaded from www.Manualslib.com manuals search engine  
  17 
Get photos and videos from your camera to your computer 
Do not disconnect the cable during transfer. Doing so will cancel the transfer of any files on their way to your computer.  
1. Select the “Get Images” button from the Main menu. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
2. The “Get media from device” window opens.   

Downloaded from www.Manualslib.com manuals search engine  
  18 
3. Both photos and videos (if you have captured any) will get downloaded. 4. Select your camera model from the device window. If your camera is the only device connected then it will be selected automatically. 5. Select a location on the computer where to place the new photo and video files. 6. Add the new photo and video files to albums if desired. 7. Select to remove the media files from the selected device after the import. 8. Click the...

Downloaded from www.Manualslib.com manuals search engine  
  19 
Using Your Camera as a Webcam 
 Your  camera  can  also be  used  as  a  Webcam  with  most  instant  messenger and  web  conferencing 
applications that support video, when plugged into your computer. 
 
On PC: The webcam driver is installed on your computer when you install the Vivitar Experience Image 
Manager – TARGET Edition for this device. 
1. Open your web conferencing application to activate the video camera option. 
2. The webcam...