Vivitar Vivicam 6300 Users Manual

							Downloaded from www.Manualslib.com manuals search engine EN-61
MENU OPTIONS
Camera Menu
This menu is for the basic settings to be used when capturing still images.
1. Rotate the mode dial to A , P , SCENE , Tv , Av or M and turn your ViviCam 6300 on.
2. Press 
 , then use W or X to select the [Mode1] / [Mode2] / [Mode3] menu.

						

							Downloaded from www.Manualslib.com manuals search engine EN-62
Mode1 ItemFunctional Description
Image SizeRefer to “Camera Menu - In  A  (Auto) Mode” in LIST OF MENU
OPTIONS.
QualityRefer to “Camera Menu - In  A  (Auto) Mode” in LIST OF MENU
OPTIONS.
Item Functional Description
CaptureSets the recording method at the time of taking pictures.
Mode *  
X1Single
*  
Burst
*  
  AEB
Q

						

							Downloaded from www.Manualslib.com manuals search engine EN-63
Mode2 ItemFunctional Description
MeteringRefer to section in this manual titled “Selecting the Metering Mode” for
further details.
CaptureRefer to “Camera Menu - In A (Auto) Mode” in LIST OF MENU OPTIONS.
Mode
Digital ZoomThis sets whether or not to use digital zoom at the time of shooting.
* On / Off
ISO Sets the sensitivity for taking pictures. When the sensitivity is raised
(and the ISO figure isincreased), photography will become possible
even in dark locations, but the more pixilated (grainer) the image will
appear.
*Auto / 50 / 100 / 200
ISO
Mode1 ItemFunctional Description  
						

							Downloaded from www.Manualslib.com manuals search engine EN-64
Mode3 ItemFunctional Description
ColorSets the color of the image that will be captured.
*  
Full Color
*  
Black & White
*  
Sepia
SharpnessSets the level of image sharpness.
*  
High
*  
Medium
*  
Low
Saturation To capture an image, your ViviCam 6300 offers you three different
degrees of color to match with your preference.
Your images will demonstrate different impression by selecting
different degrees of color. This is called “Saturation”.
*  
High
*  
Medium
*  
Low
Date Imprint The date of recording can be printed directly on the still images. This
function must be activated before the image is captured. The date
appears on the right bottom of the captured picture. When images
are shot with date imprint feature, the date cannot be removed later.
* On / Off
DATE  
						

							Downloaded from www.Manualslib.com manuals search engine EN-65
Video Menu
This menu is for the basic settings to be used when recording video clips.
1. Rotate the mode dial to 
 mode and turn your ViviCam 6300 on.
2. Press 
 , then use S or T to select the option item, then press the  button.
3. Use S or T to select the desired setting, and press the 
 button.
4. To exit from the playback menu, press the 
 button.
Set :
Exit :
Video
ColorR
GB
1 / 2
Digital ZoomOn
Item Functional Description
ColorREFER TO “Camera Menu-In In  P , SCENE , Tv , Av or M Mode (Mode3)” of
MENU OPTIONS.
Digital Zoom REFER TO “Camera Menu-In In P , SCENE , Tv , Av or M Mode (Mode2)” of MENU
OPTIONS.  
						

							Downloaded from www.Manualslib.com manuals search engine EN-66
Playback Menu
In the   (Playback) menu, set which settings are to be used for playback.
1. Press the 
 (Playback) button.

						

							Downloaded from www.Manualslib.com manuals search engine EN-67
R
Item Functional Description
Resize Changes the size of a recorded image.
Resizing replaces the original image with the changed image.  Only resizing to the
smaller size is available.
*  
2848x2136
*  
2272x1704
*  
1600x1200
*  
640x480
Quality ChangeChange the quality (compression rate) of a recoded image.
Compresses images down to half of their size or more, overwrites an old size images
with a newly compressed image.  Only quality changing to the lower quality level is
available.
*  
Fine
*  
Normal
*  
Economy
Copy To Card Allows you to copy your files from the ViviCam 6300’s internal memory to a memory
card. Of course, you can only do this if you have a memory card installed and some
files in internal memory.
* Yes / No

						

							Downloaded from www.Manualslib.com manuals search engine EN-68
Setup Menu
This feature allows you to set up the default settings by preference for using your ViviCam 6300.
1. Rotate the mode dial to  
 (Setup) mode and turn your ViviCam 6300 on.
2. Press 
 ,then use W or X to select the [Set-up1] / [Set-up2] / [Set-up3] menu.
3. Use S or T to select the desired option item, then press the 
 button.
4. To exit from the setup menu, rotate the mode dial to other desired mode again.
Set :
TV
LCD BrightnessNTSCNTSCPALUSB ModePC
Auto Shut Down
Set-up1Set-up3 Set-up2
3 Min.1 / 4
Set-up1
Set :
Date & Time
Languagem/d/y Louder
EnglishY/M/D
Set-up3 Set-up2FormatBeeper
1 / 4Set :
1 / 3
Reset Number1
Set to DefaultV.Version
Set-up1
Set-up3 Set-up2
Item Functional Description
FormatErases all images and reformats the SD card loaded in your ViviCam 6300. Protected
images are also erased. SD card cannot be formatted if it is write-protected.
Refer to the section in this manual titled “Formatting an SD Memory Card or Internal
Memory” for further details.
* Yes / No
BeeperThis sets whether or not to mute the startup sound, and the camera sound each
time you press a camera button.
* Louder / Soft / Off
Date & Time This sets the date and the time.
Refer to the section in this manual titled “Setting the Date and Time” for further details.
LanguageSets the language that is displayed on the LCD monitor.
Refer to the section in this manual titled “Choosing the Screen Language” for further details.
* English / Français
/ Deutsch / Español / Italiano/ / 

						

							Downloaded from www.Manualslib.com manuals search engine EN-69
NTSCPAL
Item Functional Description
Reset NumberSets whether or not to reset the file number when you take photographs. This
creates a new folder. The captured images are recorded to the newly created
folder from number 0001. If you want to reset the file number, be sure that no
images are recorded in the internal memory or the SD memory card.
* Yes / No
Set to DefaultReturns all basic settings to the ViviCam 6300’s default settings. The time setting
will not be reset.
* Yes / No
VersionThis displays the current firmware version of the ViviCam 6300.
„[Set-up3] settings
Item Functional Description
USB Mode Selects to choose one of the following modes for further settings.
* PC / PictBridge / PC CAM.
TV Sets video output of the ViviCam 6300 for matching the video output system of
the equipment that you are going to connect to the ViviCam 6300.
* PAL / NTSC
LCD Brightness This sets the brightness of the LCD monitor.
The adjustment range is from -5 to +5.
Auto Shut Down If no operation is performed for a specific period of time, the power to the ViviCam 6300
is automatically turned off. This feature is useful to reduce battery wear.
* 2 Min. / 3 Min. / 5 Min. / Off
„[Set-up2] settings
D
1
V.  
						

							Downloaded from www.Manualslib.com manuals search engine EN-70
CONNECTING THE VIVICAM 6300 TO OTHER DEVICES
USB Cable
Notebook
Computer
TV
PCMCIA Adapter
SD Card Reader SD Card Reader
AV Cable
SD Memory Card
Printer