Vivitar Vivicam 6150s Users Manual

Downloaded from www.Manualslib.com manuals search engine EN-11
Rear View
1. Status LED
2. LCD monitor
3.WArrow button (Left)
Self-timer button
4.TArrow button (Down)
MODE button
5.SArrow button (Up)
MENU button
6.XArrow button (Right)
Flash button
7.OKOK button
Digital Zoom button
8.Playback button
9. Strap holder
10. PC (USB) terminal
11. Battery / SD card cover
12. Tripod socket
23145678
109
11
12  

Downloaded from www.Manualslib.com manuals search engine EN-12
LCD Monitor Information
„ „„ „
„ Camera Mode
1. Internal memory/SD memory
card indicator
[ 
INT ] Status of internal memory
[  ] Status of SD memory card
2. Remaining battery status
[ 
 ] Full battery power
[  ] Medium battery power
[ 
 ] Low battery power
[  ] No battery power
3. Flash  mode
[Blank]Auto
[ 
 ] Red-eye  Reduction
[    ] Forced Flash
[  
 ] Flash Off
4. Focus area
5. Image size
[ 
 ] 2816 x 2112
[  ] 2272 x 1704
[  ] 1600 x...

Downloaded from www.Manualslib.com manuals search engine EN-13 „ „„ „
„ Video Mode
1. Video mode
2. Recordable movie time available
3. SD memory card indicator (if present)
4. Battery power indicator
5. Focus area
„ „„ „
„ Image Playback
1. Playback mode
2. SD memory card indicator (if present)
3. Battery power indicator
4. Playback information
„ „„ „
„ Video Playback
1. Playback mode
2. Video mode
3. Total of recorded time
4. SD memory card indicator (if present)
5. Battery power indicator
6. Playback...

Downloaded from www.Manualslib.com manuals search engine EN-14
PREPARING THE VIVICAM 6150s
Installing the Batteries (Optional Accessory)
You can use 2 AA size batteries to power the camera. Make sure that the power of the digital camera is
off before inserting or removing the batteries.
1. Make sure the camera is turned off.
2. Open the battery cover.
3. Insert the batteries in the correct orientation as shown in the
illustration.
4. Close the battery cover.
„To remove the batteries,turn the camera off...

Downloaded from www.Manualslib.com manuals search engine EN-15
Inserting and Removing an SD Memory Card (Optional Accessory)
The digital camera comes with 16MB of internal memory (14MB available for image storage), allowing you
to store captured still images or video clips in the digital camera. Moreover, you can also expand the
memory capacity by using an optional SD (Secure Digital) memory card so that you can store more files.
1 . Make sure your camera is turned off before inserting or removing
a...

Downloaded from www.Manualslib.com manuals search engine EN-16
Attaching the Camera Strap
Attach the strap as shown in the illustration.
LED Indicators
IndicatorStateDescription/Activity
Self-timer indicatorBlinking red The digital camera is powering up.
LED indicator Blinking green The digital camera is ready to record images (or movies).
LED indicator Blinking green USB communication/transfer in progress
Self-timer indicatorBlinking redCharging the flash.
Self-timer indicatorBlinking red The self-timer...

Downloaded from www.Manualslib.com manuals search engine EN-17
GETTING STARTED
Turning the Power On/Off
Load the batteries and insert an SD memory card before starting.
JTo turn the camera on, slide the lens cover open until it clicks,
uncovering the lens.
JTo turn the camera off, slide the lens cover closed until it clicks,
covering the lens.
JThe power is turned off automatically when the camera has not been operated for a fixed period time.
To resume the operation condition, turn the power on again....

Downloaded from www.Manualslib.com manuals search engine EN-18
Choosing the Screen Language
Follow the steps below to choose the desired language.
1. Slide the lens cover open until it clicks to turn on the camera.
„ „„ „
„The camera mode (default preview) is displayed.
2. Press S / MENU and access in setup menu with the X button.
„ „„ „
„You may also toggle the T / MODE button and switch to
[ 
 ] mode or press the [  ] button, then follow the step
above to access in setup menu.
3. Select [Language] with...

Downloaded from www.Manualslib.com manuals search engine EN-19
Setting the Date and Time
Follow the steps below to set the date display style, current date and time.
1. Slide the lens cover open until it clicks to turn on the camera.
„ „„ „
„The camera mode (default preview) is displayed.
2. Press S / MENU and access in setup menu with the X button.
„ „„ „
„You may also toggle the T / MODE button and switch to
[ 
 ] mode or press the [  ] button, then follow the step
above to access in setup menu.
3....

Downloaded from www.Manualslib.com manuals search engine EN-20
Formatting an SD Memory Card or Internal Memory
The term “Formatting” means preparing an “SD Memory Card” to record images; this process is also called
“initialization”. This utility formats the internal memory (or memory card) and erases all stored images and data.
1. Slide the lens cover open until it clicks to turn on the camera.
„ „„ „
„The camera mode (default preview) is displayed.
2. Press S / MENU and access in setup menu with the X...