Vivitar Vivicam 5110 Users Manual

							Downloaded from www.Manualslib.com manuals search engine 31
Using the Macro Mode
Use [  ] Macro mode to capture a close-up of the subject, such as flowers or insects. The effective range is
between 0.6m to 1.1m.
1. Move the macro switch located on the front side of the camera to
the [ 
 ] position.
  LCD monitor will display [ ] as Macro mode.
2. Compose your image.
3. Press the shutter button.
  To disable macro photography, slide the macro switch back to the
     [ 
 ] Normal mode.
Note:
  In [  ] Macro mode, EV compensation, Scene mode and ISO speed cannot be set.
  In [  ] Macro mode, Flash mode is automatically set to [   ] Flash off.
  After a macro shot is taken DO NOT FORGET to reset the lens to the  [  ] Normal position.  
						

							Downloaded from www.Manualslib.com manuals search engine 32
Setting the Image Resolution and Quality
Resolution and quality settings determine the pixel size (dimension), image file size, and compression ratio for
your images. These settings affect the number of images that can be stored in memory, or on an SD memory card.
As you get to know ViviCam 5110, it is recommended that you try each quality and resolution setting to get an
appreciation for the effects that these settings will have on your images.
Higher resolution and higher quality images offer the best photographic results but produce large file sizes. Therefore,
fewer images will take up more memory space.
High resolution and quality settings are recommended for printed output and situations requiring the finest detail.
Lower resolution/quality images take up less memory space and may be quite suitable for sharing images via
e-mail, in a report, or on a web page.
To change image resolution or quality settings perform the steps below:
1. Press the MENU button to enter the Capture menu and select Size or Qual-
ity by using the 
 /  button. Press the  button to enter the sub-menu.
2.After entering the sub-menu, select your option by using the 
 /  button.
Press the  button to confirm the setting.
3. To exit, press the MENU button.  
						

							Downloaded from www.Manualslib.com manuals search engine 33
Number of Recordable Images
The frame counter indicates the approximate number of images that can be stored on the internal memory or the
SD memory card at the camera’s image quality and size settings. The number of recordable images may vary
depending on the recorded subject and the capacity of the memory card, or if there are files other than images,
or when the recording is made while switching the picture quality/resolution.
ResolutionQuality16MB Internal
Memory
(14MB
available for
image storage)8MB SD
Memory
Card16MB SD
Memory
Card32MB SD
Memory
Card64MB SD
Memory
Card128MB SD
Memory
Card
2560 x 1920
2048 x 1536
1280 x 960
640 x 480
256MB SD
Memory
Card
15
20
26
22
29
40
46
60
75
121
151
17215
20
26
23
30
40
48
60
75
121
151
172 7
10
14
12
16
21
25
32
43
64
80
10735
46
62
53
68
92
109
140
185
296
328
42272
94
128
110
140
189
224
288
378
605
672
885150
196
266
226
292
387
461
571
750
1200
1333
1714289
379
517
441
565
759
900
1104
1429
2430
2700
3566
* The above data shows the standard testing results. The actual capacity varies according to the shooting con
ditions and settings.
512MB SD
Memory
Card
572
748
1008
859
1131
1496
1784
2320
2900
4640
5155
7168  
						

							Downloaded from www.Manualslib.com manuals search engine 34
SHOOTING-LETTING YOU SELECT SETTINGS
Auto Mode
Using  [ A ] Auto mode the majority of the settings are adjusted by the camera. Simply point the subject and then
shoot.
1. Press the MENU button to enter the Capture menu and select Scene by
using the 
 /  button. Press the  button to enter the sub-menu.
2. After entering the sub-menu, select [Auto] by using the 
 /  button.
Press the 
 button to confirm the setting.
  LCD monitor will display [ A ] as Auto mode icon.
3. To exit, press the MENU button.
Note:
  Camera original status is set as [ A ] Auto mode.
  For other settings like Language, Power Off time or others choose Setup in Capture/Video/Playback
     menu.  
						

							Downloaded from www.Manualslib.com manuals search engine 35
Spor ts Mode
For dynamic action choose [  ] Sports mode. This feature also letting you to capture a sequence of 2 frames
in rapid succession.
1. Press the MENU button to enter the Capture menu and select Scene
by using the 
 /  button. Press the  button to enter the sub-menu.
2. After entering the sub-menu, select [Sports] by using the 
 /  button.
Press the 
 button to confirm the setting.
  LCD monitor will display [  ] as Sports mode icon.
3. To exit, press the MENU button.
Note:
  In  [  ]  Sports mode, ISO speed cannot be set.
  In  [  ]  Sports mode, Flash mode is automatically set to [   ] Flash off.
  For other settings like Language, Power Off time or others choose Setup in Capture/Video/Playback menu.  
						

							Downloaded from www.Manualslib.com manuals search engine 36
Night Scene Mode
Capturing human subjects by using [  ] Night Scene mode helps to provide a natural balance between the
main subject and the background. The people in an evening sky or night scene are illuminated with lights from
the flash while the background is captured at a slow shutter speed to prevent blurring and improve the overall
exposure.
1. Press the MENU button to enter the Capture menu and select Scene
by using the 
 /  button. Press the  button to enter the sub-menu.
2. After entering the sub-menu, select [Night Scene] by using the 
 / 
button. Press the  button to confirm the setting.
  LCD monitor will display [  ] as Night Scene icon.
3. To exit, press the MENU button.
Note:
In [  ] Night Scene mode, Flash mode will automatically detect the ambient lighting. If the surrounding
brightness is low, the flash will fire to [ 
A ] Red-eye reduction.
In [ ] Night Scene mode, ISO speed cannot be set.
For other settings like Language, Power Off time or others choose Setup in Capture/Video/Playback menu.  
						

							Downloaded from www.Manualslib.com manuals search engine 37
Por trait Mode
Taking pictures by selecting [  ] Portrait mode helps you to construct portraits in which the main subject stands
out sharply and clearly while the background’s details are out of focus.
1. Press the MENU button to enter the Capture menu and select Scene by
using the 
 /  button. Press the  button to enter the sub-menu.
2. After entering the sub-menu, select [Portrait] by using the 
 /  button.
Press the 
 button to confirm the setting.
  LCD monitor will display [  ] as Portrait mode icon.
3. To exit, press the MENU button.
Note:
  In [  ] Portrait mode, ISO speed cannot be set.
  In [  ] Portrait mode, in a dark or night-time background, Flash mode defaults to [A] Red-eye reduction.
  For other settings like Language, Power Off time or others choose Setup in Capture/Video/Playback menu.
A  
						

							Downloaded from www.Manualslib.com manuals search engine 38
Landscape Mode
Taking images by choosing [  ] Landscape mode helps you to capture vivid and expansive landscape pictures
with the enhancement of image’s color and saturation. [ 
 ] Landscape mode is used when the distance to the
subject is between 1.1m to infinity.
1. Press the MENU button to enter the Capture menu and select Scene by
using the 
 /  button. Press the  button to enter the sub-menu.
2. After entering the sub-menu, select [Landscape] by using the 
 / 
button. Press the  button to confirm the setting.
  LCD monitor will display [  ] as Landscape mode icon.
3. To exit, press the MENU button.
Note:
  In [  ] Landscape mode, ISO speed cannot be set.
  In [  ] Landscape mode, Flash mode is automatically set to [   ] Flash off.
  For other settings like Language, Power Off time or others choose Setup in Capture/Video/Playback menu.  
						

							Downloaded from www.Manualslib.com manuals search engine 39
Backlight Mode
Use [  ] Backlight mode when light is coming from behind your subject, throwing their features into shadow, or
when your subject is in the shade but the background is brightly lit.
1. Press the MENU button to enter the Capture menu and select Scene by
using the 
 /  button. Press the  button to enter the sub-menu.
2. After entering the sub-menu, select [Backlight] by using the 
 /  button.
Press the 
 button to confirm the setting.
  LCD monitor will display [  ] as Backlight mode icon.
3. To exit, press the MENU button.
Note:
  In  [  ] Backlight mode, Flash mode defaults to [  ] Fill flash (on).
  In  [  ] Backlight mode, ISO speed cannot be set.
  For other settings like Language, Power Off time or others choose Setup in Capture/Video/Playback menu.  
						

							Downloaded from www.Manualslib.com manuals search engine 40
MOVIE MODE
Using  [  ] Movie mode allows you to record video clips at a resolution of 320 x 240 pixels.
1. Press the MODE button to enter the [ 
 ] Movie mode.
2. You can start recording a video clip by pressing the shutter button.
3. To stop recording, press the shutter button again.
Note:
  In  [  ] Movie mode, resolution/quality, self-timer cannot be set or activated.
  In  [  ] Movie mode, the flash mode is automatically set to [  ] Flash off.
  To set EV or White balance you may use the Video menu.
00:00