Vivitar Vivicam 5100 Users Manual

							Downloaded from www.Manualslib.com manuals search engine 41
IMAGE PLAYBACK
In [  ] Playback mode, you can view, magnify your images or play video clips back. This mode even provides
thumbnail images display and slide show, allowing you to quickly search for the image that you want or play the
images back one by one automatically.
Single Image Playback
Play back still images one at a time.
1. Press the MODE button twice to enter [ 
 ] Playback mode.
  The last recorded image appears on the LCD monitor.
2. View and select your recorded images by using the 
 /  button.
  To view the previous image, press the    button.
  To view the next image, press the  button.
Note:
To exit [  ] Playback mode, press MODE button.
If there is no image stored in the internal memory or on the memory card, [No Image] message will appear on
the LCD monitor.
During playback, the recorded image appears to be larger than the one on preview in capture mode.
2 of  10  
						

							Downloaded from www.Manualslib.com manuals search engine 42
Magnifying Images
While reviewing your images, you may enlarge a selected portion of an image. This magnification allows you to
view fine details.
1. Press the MODE button twice to enter [ 
 ] Playback mode.
  The last image frame appears on the LCD monitor.
2. View and select your images by using the 
 /  button.
3. Enlarge the image by pressing the  
 button.
  Pressing the  button once magnifies the image to 2X.
4. Use the 
 /  /  /  button to select the area to enlarge.
5. To return to the regular display from 4X-enlarged status, press the 
button.
Note:
  Each press of the   button, the modes switch cyclically:
     1X     2X     3X     4X     1X.  
						

							Downloaded from www.Manualslib.com manuals search engine 43
Viewing Nine Images At A Time
This function allows you to view nine thumbnail images on the LCD monitor simultaneously so that you can quickly
scan for a particular image.
1. Press the MODE button twice to enter [ 
 ] Playback mode.
2. Press the [ 
 ] thumbnail button and nine thumbnail images appear on
the LCD monitor. (Assuming there are nine or more recorded images in
the memory.)
3. Use the 
 /  /  /   button to move the cursor to select the image to
be displayed at regular size.
4. Press the 
  button to display the selected image on the full screen.
00:12 05 of 09  
						

							Downloaded from www.Manualslib.com manuals search engine 44
Viewing Video Clips
To view the recorded video clips, follow the steps below:
1. Press the MODE button twice to enter [ 
 ] Playback mode.
2. Select the video clip that you want to view by using the  
 /  button.
Automated Playback (Slide Show)
Slide show function enables you to play your images back automatically in sequential order as a slide show.
This is a very useful and entertaining feature for reviewing recorded images and for presentations.
1. Press the MODE button twice to enter [ 
 ] Playback mode. Then press
    the MENU button to enter the Playback menu.
2. Select “Slide Show” by using 
 /  button then press the  button to
enter the sub-menu.
3. Set the playback interval by using the 
 or   button and press
the 
 button to confirm.
  The slide-show starts displaying your images on the LCD monitor,
     one by one, with the interval that you set.
  To stop the slide-show display, press the  button.
Note:
  To cancel automated playback (slide show) you may press the MENU button to exit.
00:52 2 of 10  
						

							Downloaded from www.Manualslib.com manuals search engine 45
Protecting Images
This feature allows you to prevent recorded images from being accidentally erased.
1. Press the MODE button twice to enter [ 
 ] Playback mode. Then press
    the MENU button to enter the Playback menu.
2. Select Protect by using the 
 /  button, and press the  button.
3. You can protect a single image or all of the images at one time by
using the 
 /  button , and press the  button.
  Single: Protect one image at one time
  All: Protect all images at once
4. Select “Unlock” or “Lock” by using the 
 /  button.
  Unlock: Unlock the protected image.
  Lock: Protect the selected image or all images.
5. Press the  
 button again to confirm the setting.
2 of  10  
						

							Downloaded from www.Manualslib.com manuals search engine 46
DELETING IMAGES
Deleting Individual Images or Video Clips
You can delete a captured image or a recorded video clip at a time by pressing the   [  ] delete button.
1. Continuously press the MODE button to enter [ 
 ] Playback mode.
  The last image frame appears on the LCD monitor.
2. View and select unwanted images by using the 
 /  button,
then press the  [ 
 ] delete button.
3. Continue the deletion if necessary.
  If all images are deleted, [No Image] will pop up.
  To exit, press the MODE button again.
Note:
  Please be aware of that deleted images cannot be recovered. Exercise adequate caution before deleting a file.
  Protected images cannot be deleted with the delete function but will be erased by formatting.  
						

							Downloaded from www.Manualslib.com manuals search engine 47
Deleting All Images/Video Clips
1. Press the MODE button twice to enter [  ] Playback mode. Then press
    the MENU button to enter the Playback menu.
2. Select Delete by using the 
 /  button, and press the   button.
3. Select [All Images] by using the 
 /  button,then select [Execute] and
press the 
  button to confirm the deletion.To cancel the action, select
[Cancel].
Note:
  Please be aware that the deleted images cannot be recovered. Exercise adequate caution before deleting a file.
  Protected images cannot be deleted with the delete function.
 If an SD memory card is inserted; images and video clips recorded on the memory card will be deleted first.  
						

							Downloaded from www.Manualslib.com manuals search engine 48
For matting an SD Memor y Card or Inter nal Memor y
This utility formats the internal memory (or memory card) and deletes all stored images and data.
1. Press the MENU button to enter Setup in any mode.
2. Select [Format ] by using the 
 /  button. Press the  button to enter
    the sub-menu.
3. If you want to format the SD memory card or the internal memory choose
[Execute] by pressing 
 /  button, then press the  button to confirm.
  To cancel the action, select [Cancel].
  [No Image] pops up after the SD memory card or the internal memory
     is been formatted.
Note:
Be sure the SD memory card is properly inserted into the camera before formatting it.
To format images or video clips recorded in the internal memory, be sure to remove your SD memory card first.
For complete compatibility, be sure 
NOT to select FAT 32 as the file system when you format the SD card in
your computer. Memory cards formatted in FAT 32 file system will not be recognized by this camera.  
						

							Downloaded from www.Manualslib.com manuals search engine 49
Connecting to a PictBridge Compliant Printer
Even if you do not have a computer, you can connect ViviCam 5100 directly to a printer that supports PictBridge to
perform image selection and printing using the camera monitor screen and controls.
  Connecting the camera to the printer
Connect one end of the USB cable to a PictBridge compliant printer. Connect the other end of the USB cable to the
USB connector on ViviCam 5100. Then turn on the printer and your camera. [USB] mode screen is displayed.
  Settings and printing image
1. Use S/T to select [PictBridge], then press the 
 button.
2. To select the image you want to print, choose [Images] from the PictBridge
menu and press the 
 button.
* If you want to print one image, choose [Single] and press . Then
choose the image by using W/X button and press  to confirm.
* If you want to print all images, choose [All] and press  to confirm.  
						

							Downloaded from www.Manualslib.com manuals search engine 50
3. Select [Print Size] to set the size of image you wish to print. The options
may vary depending on the type of printer being used. Press  to confirm.
4. Select [Paper Type] to choose the type of paper you wish to use. The
options may vary depending on the type of printer being used. Press 
to confirm.
5. Select [Paper Size] to set the size of paper you wish to use. The options
may vary depending on the type of printer being used. Press 
 to confirm.
6. After all settings are confirmed, select [Print] to begin printing. If you want
to cancel during printing, press the 
 button. When the printing is
completed, the message “Printing complete” will appear on the screen.
To return to PictBridge menu, press the 
 button.