Vivitar Vivicam 5022 Users Manual

							ViviCam 5022 Digital Camera  
User‟s Manual 
 
 
 
 
 
 
 
 
 
 
 
 
 
© 2009 Sakar International, Inc. All rights reserved. 
Windows and the Windows logo are registered trademarks of Microsoft Corporation. 
All other trademarks are the property of their respective companies.  
						

							 1 
Table of Contents 
 
Introduction ..................................................................................................................................................... 2 
Key Features ................................................................................................................................................... 2 
What your camera includes ............................................................................................................................. 2 
Computer System Requirements for Windows XP ........................................................................................... 3 
Computer System Requirements for Windows Vista ........................................................................................ 3 
Computer System Requirements for Macintosh ............................................................................................... 4 
A Quick Look at Your Camera.......................................................................................................................... 4 
Preparing Your Camera for Use ....................................................................................................................... 5 
Installing SD Memory Card .............................................................................................................................. 6 
Starting Your Camera ...................................................................................................................................... 8 
Camera Modes ................................................................................................................................................ 8 
Install the Vivitar Experience Image Manager Software ................................................................................. 19 
Connect your camera to the computer ........................................................................................................... 22 
Get photos and videos from your camera to your computer ........................................................................... 22 
Get started! ................................................................................................................................................... 23 
Transfer media from my camera to my computer manually (Using Windows) ................................................ 24 
Transfer media from my camera to my computer manually (Using Macintosh) .............................................. 24 
Maintenance of Your Digital Camera ............................................................................................................. 25 
Sakar Warranty Card ..................................................................................................................................... 25 
Appendix A: Specifications ............................................................................................................................ 27 
Appendix B: Troubleshooting ......................................................................................................................... 27 
 
  
						

							 2 
Introduction 
Thank  you  for  purchasing the  ViviCam 5022 5.1  Mega-Pixel Digital  Camera. Everything  you  need  to take 
quality digital photos and videos is included with your camera. 
Your digital camera can also be used as a removable disk. It enriches your life.  
Please read this manual carefully first in order to get the most out of your digital camera. 
 
 
Key Features 
 Digital Image Resolution- 5M, 3M, 2M, VGA. 
 SD RAM 8MB. 
 Supports SD/MMC memory card (not included) up to 8GB. 
 2.4 inch TFT Color LCD 
 Vivitar Experience Image Manager software for uploading and managing photos and videos to or from 
the most popular photo sharing and social network websites. 
 
 
What your camera includes 
 Digital Camera 
 Vivitar Experience Image Manager software Installation CD  
 USB cable 
 Quick Start Guide 
 Strap  
  
						

							 3 
Computer System Requirements for Windows XP 
To be able to download photos to your PC, you will need the following minimum configuration: 
 Pentium 4 processor or above with Windows XP service pack 2 
 512 MB RAM, with 100MB of free disk space 
 1024 x 768 Recommended screen resolution  
 16-bit color or higher display adaptor 
 CD-ROM Drive 
 QuickTime 6 or higher  
 Microsoft Internet Explorer 7 or higher 
 Windows Media Player 10 or higher 
   Internet connection required 
 
Computer System Requirements for Windows Vista 
To be able to download photos to your PC your will need the following minimum configuration: 
 Windows Vista 
 800MHz processor and 512 MB of system memory 
 20GB hard driver with at least 15GB of available space 
 Support for Super VGA graphics 
 Available USB Interface  
 CD-ROM drive QuickTime 6 or higher 
 Microsoft Internet Explorer 7 or higher 
 Internet connection required  
						

							 4 
Computer System Requirements for Macintosh 
 Macintosh with Intel processor running Mac OS X v10.4.6 or later 
 256 MB RAM, 100 MB free disk space 
 Display: 1024 x 768 or higher-resolution monitor 
 QuickTime 6 or higher 
 Internet connection required   
 
A Quick Look at Your Camera 
           
						

							 5 
Preparing Your Camera for Use 
Battery Installation 
Your camera requires 3 AAA batteries. To insert the batteries into the camera: 
1. Slide and open the battery compartment at the bottom of the camera. 
2. Please make sure that the batteries are inserted with the correct polarity facing up. 
 
 
3. Close the battery door. 
When the “No  Power” is  displayed on  the  LCD, this indicates that your  camera  has an insufficient  battery 
power level and will be automatically powered off. You need to download the sample photos and videos to your 
PC.    If there is no SD card inserted before it powers off the photos and videos will be lost.  
						

							 6 
Note: 
1. If you don‟t intend to use your camera for an extended period of time, please remove the batteries to 
avoid battery leakage and corrosion. 
2. Please don‟t remove the batteries or power off your camera before downloading the test photos or 
videos  when  you  have  not  inserted  an SD card.  The  test  images  will  be lost forever  if  they  are  not 
downloaded before the camera is shut down or powered off. 
3. Do not mix old and new batteries. 
4. We  recommend  you  use  Alkaline  batteries.  Do not  mix  alkaline,  standard  (carbon-zinc),  or 
rechargeable (nickel-cadmium metal hydride) batteries. 
5. In  order  to  conserve  battery  power  if  the  camera  is on  but  not in  use  for  60 seconds it  will 
automatically shut off. In this case too only the sample images will be lost. 
 
Installing SD Memory Card 
Your camera has a memory card slot that enables you to insert any “SD” compatible memory card. Adding a 
memory card is needed for normal use and will allow you to increase the capacity of your camera before you 
have to transfer photos and videos to your PC. Install the SD memory card as below: 
1. Locate the Memory Card slot. 
2. Insert the Memory card into the slot in the correct direction. (see the sketch below)  
						

							 7 
                      
3. Push the card in until you feel it “click” into position. The top of the card should be flushed with the surface 
of the camera. An icon  will appear on the LCD screen after you turn on your camera. 
4. Once the external memory card is inserted into the camera all the images taken with the camera will be 
stored on the card. 
Note:  
1. An external memory card is required for normal use. Your camera supports any compatible SD memory 
card (up to 8GB). 
2. “Card  inserted,  change  to  card” will appear on  the LCD screen  when  you  insert the  card  indicating  that 
photos and  videos will now be  stored on  the  SD  memory  card.  Reversely, “Card  removed,  change  to 
internal memory” will appear on the LCD screen when you remove the card. 
3. If  there  are  photos and  videos in the  internal memory  when  you  insert  the card into  your  camera, “copy 
SDRAM file to your card, please wait…” will appear on the screen. The media will now be copied to your 
card.  
						

							 8 
4. When you take out the SD memory card, “Card removed, change to Internal RAM” will appear on the LCD 
screen.  With  no  card  in  the  camera  you  will now  only be  able  to take one test  photo or  10  seconds  of 
video. 
 
Starting Your Camera 
Press  and  hold  the  Power  button  to  turn  on your  camera.  The  LCD  screen  will light  up indicating  that your 
camera is on and ready for use. 
To power off your camera, press and hold the Power button again for about 3 seconds. 
 
Camera Modes 
Taking photos 
Power on your camera, the default mode is Camera mode. A camera icon appears in the top left corner of the 
LCD screen. 
1. Hold the camera steady and compose your object as appears in the LCD screen.  
2. Press the Shutter button and wait a moment for the photo to be taken. 
 
Note: When the internal memory is full, the LCD screen will display “Memory Full! Insert a SD Memory Card 
to  Transfer  and  Take  More  Photos!” If  you  attempt  to  take photos  or videos when the camera‟s internal 
memory is full, the camera will beep continuously. Please download the test images to your computer using the 
Vivitar Experience Image Manager software as described below in the section “Transfer photos and videos  
						

							 9 
to your computer” as soon as possible or insert an SD memory card in order to take more images! 
 
Flash 
Your camera has a built in flash function which enables you to take photos when the light condition is not good. 
1. Press the Up button. 
2. The icon  will appear at the top of the LCD indicating that the auto flash is turned on and ready to 
use. 
3. Press the Up button again to change from the auto flash to the red eye function. 
4. The  icon  will appear on  the  LCD indicating  that the red  eye  reduction  function has  been 
activated.  
5. Press the Up button once more until you see the icon  appear on the LCD screen. This indicates 
that the flash is forced on.  
6. To turn off the flash function, press the Up button again until the icon  is displayed on the LCD. 
 
Note: A “Low Power” message will appear on the LCD screen, if you select the flash function when the battery 
power is insufficient. To continue using the camera with the flash, please install new batteries. 
 
Digital Zoom function 
You can magnify your subject using the digital zoom. Use the T and W buttons to adjust the zoom.  
1. Press the T button to zoom in on your subject.