Vivitar Vivicam 4000 Users Manual

Downloaded from www.Manualslib.com manuals search engine User’s Manual >>
E-61
Single:Erases the selected image or
the last image.
All:Erases all of the images on
the SD card except for
protected images.
Select:Erases a set of selected
images.
5. Select [Execute] with the 
 /  buttons, and press the SET button.
To not erase, select [Cancel], and press the SET button.
Erasing an image will not affect sequential image numbering.  For
example, if you erase image number 240 the next captured image will be...

Downloaded from www.Manualslib.com manuals search engine Digital Camera >>
62-E
MENU OPTIONS
Photography Menu (Picture tab)
This menu is for basic settings used when capturing images in the photography
modes.  These settings are retained even if the camera is turned off or the Auto
Power Off function is activated.
1. Set the mode dial to one of the photography
modes.
2. Press the MENU button.
The [Picture] tab of the photography
menu is displayed.
3. Select the desired [Picture] option item with
the 
 /...

Downloaded from www.Manualslib.com manuals search engine User’s Manual >>
E-63
QualityThis sets the quality (compression rate) at which the image is captured.
Fine:Low compression
Standard:Normal
Economy:High compression
TIFF:Lossless compression (the absolute highest image quality and
the largest file sizes.)
The economy setting is not available in the movie [  ] mode.TIFF setting is only available at resolution 2816 x 2112.TIFF uses lossless compression for the absolute finest possible image
detail...

Downloaded from www.Manualslib.com manuals search engine Digital Camera >>
64-E
Photography Menu (Function tab)
1. Set the mode dial to one of the photography
modes.
2. Press the MENU button, and select the
[Function] menu with the 
 button.
The [Function] tab of the photography
menu is displayed.
3. Select the desired [Function] option item
with the 
 /  buttons, and press the SET
button to enter its respective menu.
4. Select the desired setting with the 
 / 
buttons, and press the SET button.
5. To...

Downloaded from www.Manualslib.com manuals search engine User’s Manual >>
E-65
a scene.  Using AEB the camera will capture a
sequential burst of three images at three different
exposure settings.  One shot will be at the level of
exposure automatically determined by the camera,
eV0. The two complementary shots will be underexposed
(eV -0.67), and overexposed (eV +0.67) respectively.
Afterwards, you may review the sequence of shots to
select the best exposure.
For continuous (burst) photography, press and...

Downloaded from www.Manualslib.com manuals search engine Digital Camera >>
66-E
Digital Zoom
This enables or disables digital zoom.
ON: Enable digital zoom.
OFF: Disable digital zoom.
Date Print
The date of recording can be printed directly
on still images. This function must be activated
before the image is captured.
ON:Imprints the date on still images
when capturing images.
OFF:Does not imprint the date on the still
images when capturing images.
Interval/Count
Automatically captures a specified number...

Downloaded from www.Manualslib.com manuals search engine User’s Manual >>
E-67
Photography Menu (AE/AWB tab)
1. Set the mode dial to one of the photography
modes.
2. Press the MENU button, and select the
[AE/AWB] menu with the 
 button.
The [AE/AWB] tab of the photography
menu is displayed.
3. Select the desired [AE/AWB] option item
with the 
 /  buttons, and press the SET
button to enter its respective menu.
4. Select the desired setting with the 
 / 
buttons, and press the SET button.
5. To exit from...

Downloaded from www.Manualslib.com manuals search engine Digital Camera >>
68-E
Metering
This sets the exposure-metering method for calculating proper exposure.
Multi:The entire area of the screen is measured, and the exposure is
calculated.
Spot:A very small portion of the center of the screen is measured, and the
exposure is calculated.
ISO
This sets the light sensitivity for capturing images.  When the sensitivity is raised
(the ISO figure is increased), the camera sensitivity is enhanced for...

Downloaded from www.Manualslib.com manuals search engine User’s Manual >>
E-69
Playback Menu
In the [  ] mode, you may adjust playback settings.  These settings are not
canceled even if the camera is turned off or the Auto Power Off function is
activated.
1. Set the mode dial to [ 
 ].
2. Press the MENU button.
The playback menu is displayed.
3. Select the desired option item with the
 /  buttons, and press the SET button
to enter its respective menu.
4. Select the desired setting with the 
 / 
buttons,...

Downloaded from www.Manualslib.com manuals search engine Digital Camera >>
70-E
Setup Menu (Basic tab)
In the setup menus you may adjust your Vivicam 4000s operating environment.
The settings will be retained after the power has been turned off or Auto Power
Off is activated.
1. Set the mode dial to [ 
 ].
The [Basic] tab of the set-up menu is
displayed.
2. Select the desired [Basic] option item with
the 
 /  buttons, and press the SET
button to enter its respective menu.
3. Select the desired setting...