Vivitar Vivicam 3915 Users Manual

							Downloaded from www.Manualslib.com manuals search engine 41
IMAGE PLAYBACK
In [  ] Playback mode you can view your images and video clips. Yo u can even magnify (zoom in on) your
images. Playback mode provides a thumbnail image display function that allows you to quickly search for the
image that you want. Yo u may view your images in a slideshow.
Single Image Replay
To Play back still images one image at a time.
1. Open the lens cover and press the POWER button to turn on your camera.
2. Press twice the MODE button to enter [ 
 ] Playback mode.

  The last recorded image appears on the LCD.
3. View and select your recorded images by using the 
 /  button.

  To view the previous image, press the   button.

  To view the next image, press the  button.
Note:

  To  exit [  ] Playback mode, press the MODE button.

  If there is no image stored in the internal memory or on the memory card, [No Image] appears on the LCD
monitor.
22/26  
						

							Downloaded from www.Manualslib.com manuals search engine 42
E
F
S
G
Playback Zoom
While reviewing your images, you may enlarge a selected portion of an image. This magnification capability
allows you to view fine details.
1. Open the lens cover and press the POWER button to turn on your camera.
2. Press the MODE button twice to enter [ 
 ] Playback mode.

  The last image frame appears on the LCD monitor.
3. Select an image by using the 
 /  button.
4. Enlarge the image by toggling the  
 button.
5. Use the 
 /  /  /  button to select the area to enlarge.
6. To return to the regular display from 4X-enlarged status, press the 
button.
Note:

  Each press of the   button, the modes switch cyclically:
     1X—>2X—>3X—>4X—>1X.  
						

							Downloaded from www.Manualslib.com manuals search engine 43
Viewing up to Nine Images at a Time
This function allows you to view nine thumbnail images on the LCD monitor simultaneously so that you can quickly
scan for a particular image.
1. Open the lens cover and press the POWER button to turn on your camera.
2. Press twice the MODE button to enter [ 
 ] Playback mode.
3. Press the [ 
 ] thumbnail button and nine thumbnail images appear on
the LCD monitor. (Assuming there are nine or more recorded images in
the memory.)
4. Use the 
 /  /  /   button to move the cursor to select the image to
be displayed at regular size.
5. Press the 
  button to display the selected image on the full screen.  
						

							Downloaded from www.Manualslib.com manuals search engine 44
E
F
S
G
Viewing Video Clips
To view recorded video clips, follow the steps below:
1. Open the lens cover and press the POWER button to turn on your camera.
2. Press twice the MODE button to enter [ 
 ] Playback mode.
3. Select the video clip that you want to view by using the  
 /  button.
Slide Show
The Slide show function enables you to play your images back automatically in sequential order as a slide show.
This is a very useful and entertaining feature for reviewing recorded images and for presentations.
1. Open the lens cover and press the POWER button to turn on your camera.
2. Press twice the MODE button to enter [ 
 ] Playback mode. Then press
    the MENU button to enter the Playback menu.
3. Select “Slide show” by using the 
 /  button then press the  button
to enter the sub-menu.
4. Set the playback interval by using the 
 or   button and press
the 
 button to confirm.

The slideshow starts displaying your images on the LCD, one by one,
at the interval you set.

To stop the slideshow display, press the  button.
Note:

  To exit playback (slide show) you may choose Exit from the Slide show menu.

  You can adjust the slideshow display interval from [1 sec.], [3 sec.], [6 sec.] or [10 sec.].
00:00
Playback  Menu
Delete
Copy to card
Slide show
Protect   
						

							Downloaded from www.Manualslib.com manuals search engine 45
Protecting Images
This feature allows you to prevent images from being accidentally erased.
1. Open the lens cover and press the POWER button to turn on your camera.
2. Press twice the MODE button to enter [ 
 ] Playback mode. Then press
    the MENU button to enter the Playback menu.
3. Select Protect by using the 
 /  button, and press the  button.
4. You can protect one image or all images at one time by
using the 
 /  button , and press the  button.

  Protect One: Protect one image

  Protect All: Protect all images
5. Select “UNLOCK” or “LOCK” by using the 
 /  button.

  Unlock: Unlock the protected image.

  Lock: Protect the selected image or all images.
6. Press the  
 button again to confirm the setting.
22/26  
						

							Downloaded from www.Manualslib.com manuals search engine 46
E
F
S
G
ERASING
Deleting Images and Video Clips
You can delete a captured image or a recorded video clip at a time by pressing the   [  ] delete button.
1.Open the lens cover and press the POWER button to turn on your camera.
2. Press continuously the MODE button to enter [ 
 ] Playback mode.

  The last image frame appears on the LCD monitor.
3. View and select unwanted image by using the 
 /  button, then press
the  [ 
 ] delete button.
4. Continue the deletion if necessary.

  If all images are deleted, [No Image] will pop up.

  To exit the deletion, press again the MODE button again.
Note:

  Please note that deleted images cannot be recovered. Exercise adequate caution before deleting a file.

  Protected images cannot be deleted with the erase function.  
						

							Downloaded from www.Manualslib.com manuals search engine 47
Deleting All Images and Video Clips
1. Open the lens cover and press the POWER button to turn on your camera.
2. Press twice the MODE button to enter [ 
 ] Playback mode. Then press
    the MENU button to enter the Playback menu.
3. Select Delete by using the 
 /  button, and press the   button.
4. Select [Delete All] by using the 
 /  button, then press the   button
to confirm the deletion.
Note:

  Please be aware of that deleted images cannot be recovered. Exercise adequate caution before deleting a file.

  Protected images cannot be deleted with the erase function.

 If a memory card is present; the camera will automatically use the card in preference to internal memory.  
						

							Downloaded from www.Manualslib.com manuals search engine 48
E
F
S
G
Formatting an SD Memor y Card or Internal Memor y
Formatting an SD card or internal memory will erase all the images on the SD memory card/internal memory and
recover the used memory space..
1. Open the lens cover and press the POWER button to turn on your camera.
2. Press twice the MODE button to enter [ 
 ] Playback mode. Then press
    the MENU button to enter the Playback menu.
3. Select Delete by using the 
 /  button, and press the   button.
4. Select [Format ] by using the 
 /  button, and press the  button.
5. If you want to format the SD memory card or the internal memory choose
[Yes] by pressing the 
 /  button, then press the  button to confirm.

  To cancel the action, select [No] instead.

  [No Image] pops up after the SD memory card or the internal memory
     has been formatted.
Note:

Be sure the SD memory card is properly inserted into the camera before formatting it.

To format images or video clips recorded in the internal memory, be sure to remove your SD memory card first.


Formatting will erase all information (even unrelated data) from the memory/card.  
						

							Downloaded from www.Manualslib.com manuals search engine 49
TRANSFERRING IMAGES AND VIDEO CLIPS TO YOUR
COMPUTER
You can share recorded images and video clips with your family or friends via e-mail or post them on the Web.
Before doing those things, you need to connect the camera to your computer by using the USB cable and then
transfer the images and video clips.
To transfer images and video clips from the camera to your computer, follow the steps below:
Step 1: Installing the USB driver (only for Windows 98)
Step 2: Connecting the camera to your computer
Step 3: Downloading images and video clips
System Requirements (Windows) System Requirements (Macintosh)
CPU Pentium 300 MHz processor or higher PowerPC G3/G4
OS Windows 98/98SE/Me/2000/XP OS 9.0 or higher
Memory 128 MB 128 MB
Free Space on Hard Disk 128 MB hard disk space 128 MB hard disk space
Required Devices CD-ROM Drive, available USB Port CD-ROM Drive, available USB Port  
						

							Downloaded from www.Manualslib.com manuals search engine 50
E
F
S
G
Step 1: Installing the USB Driver on Windows 98 Computers
The USB driver on the supplied CD-ROM is exclusively for Windows 98. Installing the USB driver on computers
running Windows 2000/Me/XP is not necessary. Be sure to install the driver before connecting your camera for the
first time.
1. Insert the CD-ROM packaged with the camera into the CD-ROM drive. The welcome screen appears.
2. Click “Install USB Driver”. Follow the on-
screen  instructions to complete
the installation. After the USB driver installation is complete, restart your
computer.