Vivitar Vivicam 3826 User Manual

 E
50
MOVIE MODE
Recording Video Clips
The movie mode allows you to record video clips at a resolution of 320 x 240 pixels.
1. Turn the camera on by sliding the POWER switch.
2. Press (and hold briefly) the  
  button.
The record time, REC icon, card indicator, and battery
level will display on the LCD monitor.
3. You can start recording the video clip simply by pressing
the  
  button.
To stop the recording, press the   button again.
It is not possible to zoom in or zoom out while in the[ ] Movie...

 E
51
Viewing Video Clips
To view a video clip, follow these steps below:
1. Turn the camera on by sliding the POWER switch.
2. Press the 
 button.
3. Select a video clip using the 
 /  button.
4. Press the OK button to view the recorded video clip.
While viewing a video clip the image number and duration
will be displayed.
To stop playback, press the OK button.
To exit playback, press the    playback button or rotate
the mode  dial. Then the camera will be ready to capture
the next shot or video clip....

 E
52
TRANSFERRING IMAGES AND VIDEO CLIPS TO
YOUR COMPUTER
You can share recorded images/ video clips with your family or friends via e-mail or post them
on the Web. Before doing those things, you need to connect the ViviCam 3826 to your computer
by using the USB cable and then transfer the images/video clips.
To transfer images/video clips from the ViviCam 3826 to your computer, follow the steps below:
Step 1: Instal the USB driver(only for Windows 98)
Step 2: Connecting the ViviCam 3826 to your...

 E
53
Step 1: Installing the USB Driver on a Windows 98 PC
The USB driver on the supplied CD-ROM is exclusively for Windows 98. Installing the USB
driver on computers running Windows 2000/Me/XP is not necessary.
1. Insert the CD-ROM packaged with the ViviCam 3826 into
the CD-ROM drive. The welcome screen appears.
2. Click Install USB Driver. Follow the on-screen instructions
to complete the installation. After the USB driver installation
is complete, restart your computer.
Installing the USB Driver on a...

 E
54
Step 2: Connecting the ViviCam 3826 to Your Computer
1. Connect one end of the USB cable to an available USB port
on your computer.
2. Connect the other end of the USB cable to the USB
connector on the camera.
3. Turn the camera on. Your computers operating system will
recognize the camera.
4. From the Windows desktop double click on “My Computer”
5. Look for a new “removable disk” icon.  This “removable
disk” is actually the memory (or memory card) in your
camera. Typically, the camera will be...

 E
55
Step 3: Downloading Images/Video Clips
When the ViviCam 3826 is turned on and connected to your computer, it is considered to be a
disk drive, just like a floppy disk or CD.  You can download (transfer) images by copying them
from the removable disk (untitled disk on a Macintosh) to your computer hard drive as
described in the prior section.
For Computers Running Windows
Open the “removable disk” and subsequent folders by double clicking on them.  Double click
on the folder. Your images are inside...

 E56
INSTALLING  PHOTOSUITE
PhotoSuite is a very user-friendly image-editing program. With PhotoSuite, you can retouch,
compose and organize your images. It contains a variety of templates, such as photo frames,
birthday cards, calendars and more. Get your images ready and go explore this amazing
program.
To Install PhotoSuite
1. Inset the CD-ROM packaged with the ViviCam 3826 intothe CD-ROM drive. The welcome screen appears.
2. Click Install PhotoSuite. Follow the on-screen instructions
to complete the...

 E
57
INSTALLING   PHOTOVISTA
PhotoVista is an easy-to-use program that lets you create spectacular 3600 panoramic images
in a snap. When you view these panoramas, you get the experience of being totally immersed
in a realistic environment. PhotoVistas powerful engine quickly and automatically stitches
images together, and its intuitive interface will let even a novice get great results in minutes.
To Install PhotoVista:
1. Insert the CD-ROM packaged with the ViviCam 3826  into the CD-ROM drive. The...

 E58
INSTALLING ACROBAT READER
The CD-ROM includes a PDF (portable document format) copy of the user’s manual. To view
a PDF you must have Acrobat Reader installed in your computer. Acrobat Reader is included
on the camera CD ROM. Using Acrobat Reader, you can read the user’s manual and print
sections of interest.
1.Insert the CD-ROM that came with the camera
    into the CD-ROM drive. The welcome screen appears.
2. Click “Install Acrobat Reader”.
Follow the on-screen instructions to complete the...

 E
59
USER’S MANUAL ON CD-ROM
A copy of the user’s manual on is provided on the CD-ROM in PDF format.  It is a backup copy
of the printed manual.  If you misplace the printed guide, you may print another copy from the
CD-ROM.  The only requirement for viewing the User Manual on the CD-ROM is that you have
Acrobat Reader installed on your computer.  Updates to this manual, and versions in other
languages may be found on our website.
1.Insert the CD-ROM that came with the camera into
the CD-ROM drive. The...