Vivitar Vivicam 3785 Users Manual

							Downloaded from www.Manualslib.com manuals search engine 11
11 1111
Rear View
1. LED indicator
2. MODE button
3. Multi-selector
4.  MENU button
5. USB port
6. Battery/SD card cover
7. Tripod socket
8. LCD monitor
7
8
6
1
5
4
2
3  
						

							Downloaded from www.Manualslib.com manuals search engine 12
E
F
S
G
Multi-Selector
1.  Arrow button (Up)
    Thumbnail button
2. Arrow button (Right)
    Display button
3. OK button
Digital zoom button
4. Arrow button (Down)
    Flash button
    Delete button
5. Arrow button (Left)
    Self-timer
52
3
1
4  
						

							Downloaded from www.Manualslib.com manuals search engine 13
13 1313
LED Indicators
Indicator Status Description/Activity Sound
LED indicator Solid red The ViviCam 3785 is powering up Yes *(1)
LED indicator Solid green The ViviCam 3785 is powered and ready Yes *(1)
LED indicator Blinking red ViviCam 3785 error Yes *(3)
LED indicator Blinking red Charging the flash No
LED indicator Blinking green Image is being recorded to  memory No
LED indicator Solid red USB communication/transfer in progress No
LED indicator Solid green The ViviCam 3785 is ready to record images Yes *(1)
(or movies)
Self-timer indicator Blinking red The self-timer function is activated No
---- ---- Error message Yes *(3)
---- ---- Valid button event Yes *(1)
  (1) The ViviCam 3785 sounds one beep.
  (3) The ViviCam 3785 sounds three beeps.  
						

							Downloaded from www.Manualslib.com manuals search engine 14
E
F
S
G
LCD Monitor Infor mation
1. Capture mode
2. Image resolution
[ 
 ] 2048X1536
(Native 3 MP resolution)
[ 
 ] 1600X1200
[ 
 ] 1280X960
[ 
 ] 640X480
3. Image quality
[ 
 ] Fine
[ 
 ] Normal
[ 
 ] Economy
4. Sharpness
[ 
H ] High
[ 
 ] Medium
[ 
L ] Low
5. ISO speed
(no indication for Auto)
           Auto
[ 
ISO
100 ] 100
[ 
ISO
200 ] 2006. Flash mode
[ 
 ] Flash off
[ 
  ] Fill flash (on)
[ 
A ] Red-eye reduction
[ A ] Automatic flash
7. Color mode
[ 
 ] Full Color
[ 
 ] Black & White
[ 
 ] Sepia
8. [ 
 ] Card indicator
(when present)
9. Remaining images These indicators are displayed when capturing still images:
10. Battery level
[ 
 ] Full
[ 
 ] Partly consumed
[ 
 ] Nearly exhausted
[ 
 ] Virtually no battery power11.  [  
 ]  Self-timer mode
12. White balance
(no indication for auto white balance)
Auto
[ 
 ] Daylight
[ 
 ] Cloudy
[ 
 ] Tungsten
[ 
 ] Fluorescent
13. EV compensation  
						

							Downloaded from www.Manualslib.com manuals search engine 15
15 1515
These indicators are displayed when playing images back:
1. Reverse
2. [ 
 ] Card indicator (if present)
3. Forward
4.  [ 
 ] Protect indicator (if protected)
5. Current image/total number of images
6.  Battery level
[ 
 ] Full
[ 
 ] Partly consumed
[ 
 ] Nearly exhausted
[ 
 ] Virtually no battery power
22/26  
						

							Downloaded from www.Manualslib.com manuals search engine 16
E
F
S
G
These indicators are displayed when recording video clips:
1. Movie mode
2. Recording indicator
3.  Video counter
4. [ 
 ] Card indicator (if present)
5. Battery level [ 
 ] Full
[ 
 ] Partly consumed
[ 
 ] Nearly exhausted
[ 
 ] Virtually no battery power  
						

							Downloaded from www.Manualslib.com manuals search engine 17
17 1717
These indicators are displayed when playing video clips back:
1. Recorded time
2. [ 
 ] Card indicator (if present)
3. Battery level
[ 
 ] Full
[ 
 ] Partly consumed
[ 
 ] Nearly exhausted
[ 
 ] Virtually no battery power
00:00  
						

							Downloaded from www.Manualslib.com manuals search engine 18
E
F
S
G
PREPARING YOUR VIVICAM 3785
Installing the Batteries (Optional Accessor y)
Y ou may use 2 AA size batteries (either Alkaline or Ni-MH) to power you\
r Vivicam
3785.  Most often the Vivicam 3785 will be shipped with two AA alkaline batteries.
These batteries are adequate to power-up the camera and demonstrate its
functionality for a limited period of time.  Alkaline batteries are not recommended
for long-term use or extensive photography, however.  A better choice is re-
chargeable NiMH (Nickel-Metal Hydride) batteries.  NiMH rechargeable AA
batteries offer considerably better life with the added advantage of cost-effec-
tive recharging.  The Vivicam 3785 can also use CR-V3 batteries.  CR-V3 Lithium
batteries are available in most stores where batteries are sold.  Lithium batter-
ies offer considerably better longevity.  Rechargeable CR-V3 batteries are also
available on the market.
To  install or replace the batteries:
1. Make sure your Vivicam 3785  is off.
2. Slide the battery/SD card cover.
3. Insert the batteries noting the correct polarity marks (+ or -).
4. Close the battery/SD card cover. Slide into locked position.
Attaching the Camera Strap
To  prevent accidentally dropping your Vivicam 3785 , always use the
camera strap.
Attach the camera strap as follows:
1. Thread the small loop of the strap through the strap eyelet on the Vivicam 3785 .
2. Pull the large loop through the small loop until the strap is firmly secured.  
						

							Downloaded from www.Manualslib.com manuals search engine 19
19 1919
Using an SD Memor y Card (Optional Accessor y)
Your Vivicam 3785 comes with approximately 6MB of internal memory,
allowing you to store images and video clips in the Vivicam 3785. However,
you can expand the memory capacity by using a Secure Digital (SD)  memory
card. Optional SD memory cards provide removable, reusable storage for
images and video clips.
1. Make sure your Vivicam 3785 is off.
2. Open the SD card/battery cover.
3. Insert the SD memory card. (Contact pins first)

 If the card cannot be inserted, check the orientation.
4. Close the SD card/battery cover.
Note:

 To prevent valuable data from being accidentally erased from
an SD memory card you can slide the write protect tab (on the side of the
SD memory card) to “LOCK”.

 To save, edit, or erase data on an SD memory card, you must unlock the card.

If a memory card is present in the Vivicam 3785; the camera will
automatically use the card in preference to internal memory.

Be sure to format the memory card with this Vivicam 3785 before its
initial usage.

The Vivicam 3785, like most digital cameras will automatically use a memory card if it is inserted into the
memory card slot.  This is called °ßcard preference°®.  Data stored in internal memory will not be accessible
if a memory card is present.  To again access your data stored in internal memory, simply remove the SD card.
To remove an SD memory card
1. Make sure your Vivicam 3785 is off.
2. Open the SD card/battery cover.
3. Press lightly on the edge of the memory card and it will eject.
Note:

Memory cards may become warm during use; observe caution when removing memory cards.

When a memory card is removed from the Vivicam 3785; the camera will automatically revert to using internal
memory.  
						

							Downloaded from www.Manualslib.com manuals search engine 20
E
F
S
G
Setting the Date and Time
The Date/Time screen will be presented if/when:

 The ViviCam 3785 is turned on for the first time.

 The ViviCam 3785 is turned on after removing the batteries for a long
period of time.
When the date and time setting screen appears, follow these steps to set
the correct date and time.
1. Enter the values of the year, month, day and the time by using
the 
 /  /  /  buttons.

 To increase the value, press the 
 button.

 To decrease the value, press the  button.
2. Press the 
 button after all fields are set.
Choosing the Language
Follow the steps below to set the OSD (On-Screen Display) language.
1. Select a language that you prefer by using the 
 /  buttons.
2. Press the 
 button to confirm.
Note:

 The language setting will be retained even if the ViviCam 3785 is turned off.