Vivitar Vivicam 3760 Users Manual

							Downloaded from www.Manualslib.com manuals search engine 10
E
F
S
G
1
68
2
34
5
7
GETTING TO KNOW YOUR 
VIVICAM 3760 VIVICAM 3760VIVICAM 3760 VIVICAM 3760
VIVICAM 3760
Front View
1. Self-timer LED
2. Shutter button
3. Power button
4. Flash
5. Lens
6. DC IN 3V port
7. USB port
8. Strap eyelet  
						

							Downloaded from www.Manualslib.com manuals search engine 11
1
68
2
3
4
5
7
1
2
3
45
Rear View
1. WZoom out button
2. TZoom in button
3  Playback button
4. Menu button
5. LED indicator
6. LCD monitor
7. Battery/SD Memory Card cover
8. Tripod socket
1. Arrow button (Up)
Mode button
2.Arrow button (Left)
Flash button
3.Arrow button (Down)
Macro button
Delete button
4.Arrow button (Right)
Self-timer button
5. OKOK button  
						

							Downloaded from www.Manualslib.com manuals search engine 12
E
F
S
G
LED Indicators
Indictor Status Description/Activity Sound
LED indicator Solid red The ViviCam 3760 is powering up Yes*(2)
LED indicator Solid green The ViviCam 3760 is powered and ready Yes*(1)
LED indicator Blinking red Camera error Yes*(3)
LED indicator Blinking red Charging the flash No
LED indicator Blinking orange Image is being recorded to the memory card No
LED indicator Blinking green USB communication/ transfer in progress No
LED indicator Solid greenThe ViviCam 3760 is ready to record images Yes*(1)
(or movies)
Self-timer indicator Blinking red The self-timer function is activated Yes*(1)
* (1) The ViviCam 3760 sounds one beep.
* (2) The ViviCam 3760 sounds two beeps.
* (3) The ViviCam 3760 sounds three beeps.  
						

							Downloaded from www.Manualslib.com manuals search engine 13
LCD Monitor Information
By toggling the  button or pressing the  button, the camera switches to different modes. Respective icons
and numbers are displayed on the monitor screen to keep you informed of the camera’s status.
Record mode:
1. Record mode
2. Image resolution
[ 
 ] 2032 x 1520
[ 
 ] 1600 x 1200
[ 
 ] 1280 x 960
[ 
 ] 640 x 480
3. Image quality [ 
 ] Super fine
[  ] Fine
[    ] Normal
4. White balance [No indication] Auto
[ 
 ] Daylight
[ 
 ] Cloudy
[ 
 ] Sunset
[ 
 ] Tungsten
[ 
 ] Fluorescent
5. Flash mode [  
 ] Auto Flash
[  ] Red-Eye Reduction
[  
  ] Forced Flash
[  
 ] Flash Off
6. Macro mode
7.  Possible number of shots  remaining
8. Zoom state
9. Battery [ 
 ] Full battery power
[  ] Medium battery power
[   ]V irtually no battery power
10. Card  indicator (when present)
11. AF frame  
						

							Downloaded from www.Manualslib.com manuals search engine 14
E
F
S
G
Movie mode:
1. Movie mode
2. White balance
3. Recordable movie time available
4. Zoom state
5. Battery
6. Card indicator (when present)
Scene mode:
1. Scene mode
[ 
 ] Landscape mode
[  ] Sports mode
[  ] Portrait mode
[  ] Pan mode
[  ] Night scene mode
[  ] Backlight mode
2. Image resolution
3. Image quality
4. White balance
5. Flash mode
6. Possible number of shots remaining
7. Zoom state
8. Battery
9. Card indicator (when present)
10. AF frame
6
4
5
21
3  
						

							Downloaded from www.Manualslib.com manuals search engine 15
Image Playbavck:
1. Playback mode
2. Current image/total number of image
3. Forward key
4. Battery
5. Card indicator (when present)
6. Reverse key
Video Playback:
1. Playback mode
2. Recorded time
3. Movie mode
4. Current image/total number of image
5. Forward key
6. Battery
7. Card indicator (when present)
8. Reverse key  
						

							Downloaded from www.Manualslib.com manuals search engine 16
EF
S
G
GETTING STARTED
Y ou may use 2 AA size batteries (either Alkaline or Ni-MH) to power you\
r ViviCam 3760.  Most often the ViviCam
3760 will be shipped with two AA alkaline batteries.  These batteries ar\
e adequate to power-up the camera and
demonstrate its functionality for a limited period of time.  Alkaline ba\
tteries are not recommended for long-term
use or extensive photography, however.  A better choice is rechargeable NiMH (Nickel-Metal Hydride) batteries.
NiMH rechargeable AA batteries offer considerably better life with the added advantage of cost-effective recharging.
The ViviCam 3760 can also use CR-V3 batteries.  CR-V3 Lithium batteries are available in most stores where
batteries are sold.  Lithium batteries offer considerably better longevity.  Rechargeable CR-V3 batteries are also
available on the market.
To  install or replace the batteries
1. Make sure your ViviCam 3760 is turned off.
2. Slide the battery/SD Memory Card cover.
3. Inset the batteries, noting the correct polarity marks (+ or -).
4. Close the battery/SD Memory Card cover.
Attaching the Camera Strap
To prevent accidental dropping of the camera during operation, always use
the camera strap.
Attach the camera strap as follows:
1. Thread the small loop of the strap through the strap eyelet on the camera.
2. Pull the large loop through the small loop until the strap is firmly secured.  
						

							Downloaded from www.Manualslib.com manuals search engine 17
Using the AC Power Adapter
1. Make sure your ViviCam 3760 is turned off.
2.Connect one end of the AC power adapter to the camera jack labeled
“DC IN 3V”.
3. Connect the other end to an electrical outlet.
Note:
Make sure to use only the AC power adapter specified for the camera. Damage caused by the use of an incorrect
adapter is not covered under the warranty.
To prevent unexpected auto power off resulting from no battery power left during the process of transferring your
images to the computer, use the AC power adapter as a power supply.  
						

							Downloaded from www.Manualslib.com manuals search engine 18
EF
S
G
Using an SD Memor y Card (Optional Accessor y)
Y our camera comes with approximately 6MB of internal memory, allowing you to store images and video clips in
the ViviCam 3760. However, you can expand the memory capacity by using ta Secure Digital (SD) memory card
so that you can store additional images and video clips.
1. Make sure your ViviCam 3760 is turned off.
2. Slide the battery/SD Memory Card cover.
3. Insert the SD memory card. (Contact pins first)
If the card cannot be inserted, check the orientation.
4. Close the battery/SD Memory Card cover.
To  r emove the SD memory card, make sure your ViviCam 3760 is turned
off. Press lightly on the edge of the memory card and it will eject.
Note:
To  prevent valuable date from being accidentally erased from an SD Memory
Card, you can slide the write-protection tab (on the side of the SD memory
card) to “LOCK”.
To  save, edit or erase data stored on an SD memory card, you must unlock the
card.
Be sure to format your memory card in the camera before its initial usage.The ViviCam 3760, like most digital cameras will automatically use a memory
card if it is inserted into the memory card slot.  This is called “card preference”.
Data stored in internal memory will not be accessible if a memory card is
present.  To again access your data stored in internal memory, simply remove
the SD card.  
						

							Downloaded from www.Manualslib.com manuals search engine 19
Choosing the Language
When you turn on the camera for the first time, the language setting screen appears, prompting you to choose a
language for displayed information on the LCD monitor. Follow the steps below to set the OSD (On-Screen Display)
language.
1. Select a language that you prefer by using the 
 /  button.
2. Press the OK button to confirm.
Note:
The language setting will be retained even if the ViviCam 3760 is turned off.
Setting the Date and Time
The date/time setting screen will automatically appear:When first turning the camera on.When turning the power on after leaving the camera without battery for an extended period of time.
1. Turn the camera on by pressing the 
 button.
2. Adjust the values of the date and time by using the  /  button.To increase the value, press the  button.To decrease the value, press the  button.Press the  button to move to the next item field.
3.Press the OK button after all fields are set.