Vivitar Vivicam 3750 User Manual

 EN-10
GETTING TO KNOW YOUR VIVICAM 3750
1  

 EN-11
Features
1. Shutter button
2. Focus dial
Portrait focus
Normal focus
3. Flash
4. Lens
5. Hand strap eyelet
6. VIDEO OUT jack
7. USB connector
8. Self-timer LED
9. LED indicator10. LCD monitor
11 .
Arrow button (up)
Quality/Resolution button
Display button
12.
Arrow button (left)
Self-timer button
13.OKOK button
ZOOMDigital zoom button
14.
Arrow button (right)
Flash button
15.
Arrow button (down)
      
Delete button
16.
Power button
17.
Mode button
18.
Menu button
19. Battery/Memory card cover
20....

 EN-12
LCD Monitor Icons
Display icons - Still Image Record Mode:
1. Record mode
2. Battery level
Full battery power
Medium battery power
Low battery power
Virtually no battery power
3. Flash mode
Automatic  flash
Automatic with Red-eye reduction
Flash off
4. Focus mode
[no indication] Normal focus
Portrait focus
5. Self-timer mode 6. White balance
[no indication] Auto
Tungsten
     
Fluorescent 1
Fluorescent 2
Cloudy
Daylight
7. EV compensation
(no indication with 0EV)
8. Possible number of shots...

 EN-13
Display icons - Movie Mode:
1. Movie mode
2. Battery level
3. Recordable movie time available
4. Memory card indicator
5. EV compensation
6. White balance
7. Recording indicator (blinking)
Display icons - Still-Image Playback Mode:
1. Playback mode
2. Battery level
3. Frame number
4. Memory card indicator
Display icons - Video (movie) Playback Mode:
1. Playback mode
2. Battery level
3. Frame number
4. Recorded movie time
5. The first frame of the movie
6. Memory card indicator
7. Playback indicator  

 EN-14
GETTING STARTED
You can use 2 AA size batteries (Alkaline, Ni-MH) to power the camera.
Installing Batteries
1. Make sure the camera is turned off.
2. Slide the battery/memory card cover in the direction of the [OPEN] arrow.
3. Insert the batteries, noting correct polarity (+ and -).
4. Close the battery/memory card cover firmly.
Note:
If you will not be using the batteries for an extended period of time, remove them from the
camera to prevent leakage or corrosion.
Never use manganese batteries....

 EN-15
Inserting an SD Memory Card (optional accessory)
The ViviCam 3750 comes with internal memory, allowing you to store images and video
clips in the camera. However, you can expand the memory capacity by using an
optional SD (Secure Digital) memory card so that you can store additional images and
video clips.
1. Make sure the camera is turned off.
2. Slide the battery/memory card cover in the direction
of the [OPEN] arrow.
3. Insert an SD memory card:
The front side of the memory card (printed
arrow)...

 EN-16
Attaching the Hand Strap
To prevent accidental dropping of the ViviCam 3750, always use the strap.
Attach the hand strap as follows:
1. Thread the small loop of the hand strap through the
hand strap eyelet on the camera.
2. Pull the large loop through the small loop until  the
strap is firmly secured.
Setting the Date and Time
The DATE/TIME screen will be presented if/when:
Camera is turned on for the first time.
Camera is turned on after leaving the camera without batteries for an extended
period...

 EN-17
Setting Image Resolution and Quality
Resolution and quality settings determine the pixel size (dimension), image file size, and
compression ratio for your images.  These settings affect the number of images that
can be stored in memory, or on a memory card.  As you get to know the ViviCam 3750,
it is recommended that you try each quality and resolution setting to get an appreciation
for the effects that these settings will have on your images.
Higher resolution and higher quality images offer the...

 EN-18
This table shows the approximate number of images that you can store at each setting
in 16MB internal memory or using an optional memory card from 8MB to 512\
MB:
* The above data shows the standard testing results. The actual capacity variesaccording to the shooting conditions and setting.  Note that the ViviCam 3750 has
16MB of internal memory of which 14MB can be used for image storage.  

 EN-19
RECORD MODE
Capturing Images
Your ViviCam 3750 is equipped with a color LCD monitor to compose images.
1. Turn the ca mera on by pre ssing the power  button.
(The V iviCam 3750  will always power-up in still-image
record mode.)
2. If not in record mode, toggle the 
 button to the mode.
3. Compose your shot on the display screen.
4. Press the shutter button.
Note:
The LCD monitor does not work well under direct sunlight and bright ligh\
t.
Portrait Focus
Capturing images by selecting the portrait...