Vivitar Vivicam 3735 User Manual

							    Vivicam 3735 User Manual  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
English 
  
021014  
						

							2
userÕs manual
digital camera
Warranty Policy
This camera is under warranty for one full year from the date of purchase by the original purchaser.
In case of defects in materials or workmanship, we will replace or repair the camera free of
charge. This warranty applies to the camera only. This warranty does not include batteries, or
other accessories which have not been manufactured by our company. This warranty will not be
honored if the camera has been mishandled or tampered with, or altered by anyone other than
the manufacturer. Other than for the warranty herein, we are not responsible for loss, damage, or
inconvenience of any kind. A defective camera being returned under warranty must be
accompanied by a brief description of the difficulties encountered and also by a proof of purchase
with the date of purchase clearly indicated. All related transportation costs and insurances are at
the ownerÕs expense. Any alteration of this warranty cannot be made without the written approval
from our company.
FCC Notice
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in commercial installation. This equipment generates, uses and can
radiate radio frequency energy and if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, detectable by turning the equipment in question off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures: Reorient or relocate the receiving antenna; Increase the distance between the
equipment and the receiver; Connect the equipment to an outlet on a different circuit than that
which the receiver is connected to; Or consult the dealer or an experienced radio/TV technician
for help.
NOTE
A shielded-type DC power cable incorporated with a ferrite core is required in order to meet the
FCC emission limits and also to prevent interference to the nearby radio and television reception.
Use only shielded I/O cable incorporated with a ferrite core to connect this equipment to host
computer and TV set. Shielded A.C. power cable and shielded I/O cables are required in order to
meet the FCC emission limits. It is essential that only the supplied power cord and I/O cable(s)
can be used.  
						

							3
WARNING
Do not use this camera if it is emitting smoke, becomes unusually hot to be touched,
emitting any unusual odor or noise, or if it is in any other abnormal states.
Operating the camera in any of these situations may cause a fire or an electrical shock.
Stop using the camera immediately, turn the camera off, and then disconnect the power
source (batteries or AC power adapter). (If you are using the AC power adapter, unplug the
adapter from the AC power outlet after you have disconnected the camera.)
After checking that smoke is no longer being emitted, contact your dealer or your local
authorized service facility and request repairs. Never attempt to repair this camera by yourself
as this is dangerous.
Do not use the camera if any water has entered the camera.
Turn the camera off, and then disconnect the power source (batteries or AC power adapter).
(if you are using the AC power adapter, unplug the adapter from the AC power outlet after
you have disconnected the camera.) Then contact your dealer or your local authorized
service facility.
Do not continue to use the camera as this may cause a fire or an electrical shock.
Do not use the camera if any foreign objects have entered the camera.
Turn the camera off, and then disconnect the power source (batteries or AC power adapter).
(if you are using the AC power adapter, unplug the adapter from the AC power outlet after
you have disconnected the camera.) Then contact your dealer or your local authorized
service facility.
Do not continue to use the camera as this may cause a fire or an electrical shock.
If the camera has been dropped or if the camera case has been damaged, turn the camera
off, and then disconnect the power source (batteries or AC power adapter). (if you are
using the AC power adapter, unplug the adapter from the AC power outlet after you have
disconnected the camera.) Then contact your dealer or your local authorized service facility.
Do not continue to use the camera as this may cause a fire or an electrical shock.
Do not place the camera in any unstable locations such as on a wobbly table or sloping
surface where the camera may fall or tip over and cause injury.
Do not expose the camera to moisture and make sure that there is no water getting into the
camera. Take particular care when using the camera under extreme weather conditions
such as rain or snow, or when operating the camera at the beach on near water.
Water in the camera may cause a fire or an electrical shock.  
						

							4
userÕs manual
digital camera
WARNING
Do not insert or drop metallic or inflammable foreign objects into the camera through
access points such as the Compact Flash card slot.
This may cause a fire or an electrical shock.
Do not attempt to modify this camera.
This may cause a fire or an electrical shock.
Do not remove the camera casing.
This may cause an electrical shock.
Internal inspection, maintenance and repairs should only be carried out by your dealer or
local authorized service facility.
Avoid using this camera in the bathrooms.
Exposure to excessive moisture may cause a fire or an electrical shock.
Do not touch the power plug during a thunderstorm if you are using the AC power adapter.
This may cause an electrical shock.
Never operate this camera in any way while driving a vehicle.
This may cause a traffic accident.  
						

							5
CAUTION
Do not place this camera in damp or dusty locations.
This may cause a fire or an electrical shock.
Do not place this camera in a location affected by oil fumes or steam, such as near a
cooking stove or humidifier.
This may cause a fire or an electrical shock.
Do not leave this camera in a location subject to extremely high temperatures, such as in a
sealed vehicle or in direct sunlight.
Exposure to high temperatures may adversely affect the camera case and internal
components and may cause a fire.
Do not cover or wrap the camera or the AC power adapter with a cloth or quilt.
This may cause heat to build up and distort the case and cause a fire.
Always use the camera and its accessories in well-ventilated locations.
Handle the camera carefully and do not bump the camera into any hard object.
Handling the camera roughly may cause a malfunction.
Do not move the camera while it is switched on.
(if you are using the AC power adapter, unplug the adapter from the AC power outlet after
you have switched off the camera.) Ensure that any connector cords or cables to other
devices are disconnected before moving the camera.
Failure to do so may damage the cords or cables and cause a fire or an electrical shock.
When handling the camera, always unplug it from the power source (batteries or AC power
adapter) for safety.
(if you are using the AC power adapter, unplug the adapter from the AC power outlet after
you have disconnected the camera.)
Failure to do so may result in an electrical shock.
When leaving the camera unused for long periods, such as during a vacation, always
unplug the camera from the power source (batteries or AC power adapter ) for safety.
(if you are using the AC power adapter, unplug the adapter from the AC power outlet after
you have disconnected camera.)
Failure to do so could result in a fire.  
						

							6
userÕs manual
digital camera
CAUTION
Do not use batteries other than those specified for use with your camera.
The use of unsuitable batteries may result in the batteries splitting or leaking and causing
a fire, injury, or soiling of the battery compartment.
When fitting batteries into the camera, check the polarity markings on the battery ( - and
+ )to ensure that battery correctly.
Incorrect battery polarity may result in the batteries splitting or leaking and causing a fire,
injury, or soiling of the battery compartment.
Remove the batteries if the camera will not be used for an extended period of time.
The batteries may leak and cause a fire, injury or soiling of the battery compartment.
If the batteries leak, clean and wipe the battery compartment carefully and install new
batteries.
Wash your hands carefully if you touch the battery fluid.  
						

							7
Table of Contents
Introduction
Preparing the camera
Getting to know the camera
Front View
Top View
Back View
Bottom View
Side View
Dial Knob
Zoom Lever
Menu Controller
Voice Memo Button
View Angle Adjustment Knob
Status LCD
Attaching the Strap
Preparing Power Supply
Loading Batteries
Using the Power Adapter
Inserting/Removing the Compact Flash Card
Inserting a Compact Flash Card
Removing a Compact Flash Card
Getting Started
Turning the Camera On and Off
Checking Batteries
Turning the LCD Monitor On and Off
Adjusting the Menu Display Language and Time/Date
Formatting the Compact Flash Card
Internal Memory/CF Card Full
Navigating through Menus
Using Menus When Taking Pictures
Using Menus When Viewing Pictures
How to Change Settings
10
11
11
11
11
11
12
12
12
12
12
13
13
13
14
14
14
14
15
15
16
17
17
17
17
18
18
19
19
19
19
20  
						

							8
userÕs manual
digital camera
Taking Pictures
Taking Single Pictures
Taking Distant/Close-up Pictures
Zoom Control
Optical Zoom
Digital Zoom
Focus Lock
Taking Sports Pictures
Taking Burst Pictures
Using the Flash
Using the Self-Timer
Voice Memo
Camera Settings
The Picture Menu
ISO (Sensitivity)
Exposure Compensation
White Balance
Picture Resolution and Quality
The Camera Menu
LCD
Auto Review
Self-Timer
The Setup Menu
Advanced
Language
Set Clock
Auto Off
Sounds
LCD
Viewing, Copying and Printing
Viewing Single Pictures
Choosing Information to Display on LCD Monitor
Magnifying Pictures
Displaying Pictures in Thumbnail View
Erasing Pictures
Erasing Single Pictures
Erasing All Pictures
21
21
22
22
22
22
23
23
24
24
25
26
27
27
27
27
28
28
29
29
29
30
30
30
30
30
31
31
32
33
33
33
34
34
35
35
35  
						

							9
Protecting Pictures
Copying Picture to CF Card (Optional)
Selecting Pictures for Printing
Playing a Slide Show
Viewing on a TV Monitor
Installing Camera Software
System Requirements
Installation CD Contents
Installing the Software (Driver & Image Application)
Transferring Pictures to the Computer
Connecting the Camera to Your Computer
Downloading Pictures
USB Connection Troubleshooting
Appendices
Understanding Camera Sounds and LED
Default Camera Settings
Camera Specifications
36
36
37
37
38
39
39
39
39
40
40
40
41
42
42
43
44  
						

							10
userÕs manual
digital camera
Introduction
Congratulations on your purchase of the new digital camera.
Capturing high-quality digital pictures is fast and easy with this state-of-the-art smart camera.
Equipped with a 3.3 Megapixel CCD, this camera is capable of capturing pictures with a resolution
of up to 2048X1536 pixels. Aside from single-picture capture, the camera allows you to take
sharp and clear pictures of fast sports actions. Whats more, the camera also features Burst
mode which captures continuous motion as a sequence of pictures.
Other cool features provided by the camera include the following:
LCD Monitor - The 1.5 full-color LCD (liquid crystal display) at the back of the camera makes it
easy to frame your subject when taking pictures. It also displays a preview of the pictures you
have taken.
Digital Zoom - Zoom in 2X and get a larger, closer view of the subject.
Macro Mode - Take pictures of people portrait or objects at close range using Macro mode.
Flexible Flash Settings - Change the flash setting according to your lighting environment.
Camera Settings - Have more control over picture quality by adjusting settings such as ISO
(Sensitivity), White Balance, EV Compensation, Resolution, and more.
Thumbnail View - Display in sets of nine pictures on the LCD for easier and quicker selection of
pictures.
Slideshow - Automatically display pictures on the LCD with the Slideshow feature.
TV Connection - View pictures on a television monitor while browsing through your pictures or
playing a slideshow.
Voice Memo - Allow fifteen seconds audio track to be recorded with a still image.