Vivitar Vivicam 3675 User Manual

 20
E
Using the self-timer
The self-timer duration is 10 seconds. After the activation of the self-timer by press-
ing the shutter button, the self-timer lamp starts blinking slowly for 7 seconds and
then blinking faster for the rest of 3 seconds. With this design, you can get in the
frame when taking group pictures.
1. Secure the camera to a tripod or place it on a
stable surface.
2. Turn the camera on.
3. Set the mode dial to the 
 mode or the mode.
4. Press the  button.

 The 
 icon appears on the LCD...

 21
E
Using the macro mode
Use the macro mode to shoot a close-up of the subject, such as flowers or insects.
1. Turn the camera on.
2. Turn the mode dial to the 
 mode or the mode.
3. Press the  button.

 The 
 icon appears on the LCD monitor
and status LCD.
4. Compose the picture.
5. Press the shutter button down halfway, then
press it the rest of the way down.

 To cancel macro photography at any time,
press the 
 button again.
NOTE
• When shooting a close-up of the subject, you can compose the...

 22
E
Flash Mode
[ 
 ] Auto Flash
[  ] Red-eye Reduction
[  ] Forced Flash
[  ] Flash Off
[  ] Slow Synchro
Description
The flash fires automatically according to the
ambient conditions. Select this mode for general
photography.
The flash emits a pre-flash before the main flash
flashes, which causes the pupil in the human eye
to close and eliminates red-eye phenomenon.
Select this mode when taking pictures of people
and animals in low-light conditions.
The flash always fires regardless of the surround-...

 23
E
Taking pictures manually
You can take pictures by manually adjusting conditions such as white balance, EV
compensation and sharpness. For white balance, EV compensation or sharpness
information, refer to WHITE BALANCE, EV COMPENSATION or SHARPNESS in
Manual Record menu.
To take pictures manually:
1. Turn the camera on.
2. Turn the mode dial to the 
 mode.
3. Press the 
 button.
4. Move to WHITE BALANCE, EV COMPENSA-
TION or SHARPNESS by using the 
/ 
button.
5. Change the settings by using the /...

 24
E
PLAYBACK MODE
In the  mode, you can view, magnify, delete your images or play video clips
back. This mode even provides thumbnail images display and slide show, allow-
ing you to quickly search for the image that you want or play the images back one
by one automatically.
Viewing images
1. Turn the camera on by pressing the POWER
button.
2. Turn the mode dial to the 
 mode.
3. Select the image that you want to view by
using the 
/  button.
  
To view the previous image, press the  button.
  
To view...

 25
E
Zooming images in and out
This mode allows you to enlarge your image on the selected portion of the image
with 4X magnification to check for small details.
1. Turn the mode dial to the 
 mode with the
camera powered on.
2. Select the image that you want to view by
using the 
/  button.
3. Enlarge the image by pressing the  button.

Pressing the 
 button once magnifies the
image to 2X. Pressing it again magnifies the
image to 4X. When enlarging the recorded
image, you will see a red frame with a...

 26
E
Displaying thumbnail images
This function allows you to view 9 thumbnail images on the LCD monitor at the
same time, which can quickly search for the image that you want.
1. Turn the mode dial to the 
 mode with the
camera powered on.
2. Press the 
 button once.

The image information appears on the LCD
monitor.
3. Press the 
 button again.

Nine thumbnail images show on the LCD
monitor if the image number reaches up to
nine frames.

To view a full-size image, press the ENTER
button after selecting...

 27
E
Deleting images
You can delete one image/video clip or all images/video clips at a time depending
how long you press the  button.
To delete one image at a time:
1. Select the image/video clip you want to de-
lete by using the 
/  button. And then press
the 
 button.
2. Select [YES], and then press the ENTER
button. The next image/video clip appears.

 If you want to cancel the deletion, select
[NO].
3. Continue the deletion if necessary. If all im-
ages are deleted, [
 NO IMAGES] pops up.
To exit,...

 28
E
NOTE
MOVIE MODE
Recording video clips
The movie mode allows you to record video clips
at the resolution of 320 x 240 pixels.
1. Turn the camera on by sliding the POWER
switch.
2. Turn the mode dial to the 
 mode.

 The recordable movie time displays on the
status LCD and the LCD monitor.
3. You can start recording a video clip by press-
ing the shutter button.

 The elapsed time displays on the LCD
monitor while recording a video clip.

 To stop recording, press the shutter button
again.
• In movie...

 29
E
NOTE
Viewing video clips
To view the recorded video clips, follow the steps below.
1. Turn the mode dial to the  mode with the camera powered on.
2. Select the video clip that you want to view by using the /  button.
3. Press the shutter button to start.

To pause movie playback, press the shutter button again.

To stop movie playback, press the 
 button.
Pressing the shutter button or the 
 button while playing back the video clip will
change the status as follows:
Movie  
playback
startsMovie...