Vivitar Vivicam 3330 User Manual

							    
   
 
 
20 
6-1 Setup Mode 
 
By using the Setup Mode, you can adjust the basic camera 
functions, including: Image Size, Image Quality, Self-timer, 
White Balance, EV Compensation, OSD Language, Date/Time, 
Preset Settings, Format Media, and TV-Out items. To setup 
these items, perform the following: 
1. Turn  the Mode Dial 
 to Setup Mode 
. 
2. Using the lens cover located on the front of the camera to 
turn on/off camera. After turn on the camera, the red LED 
will be blinking, and then the setting up screen will shown 
on the LCD monitor. 
3. By pressing the arrow button 
 / 
 on the 
MENU/ENTER Button 
  to move and select the menu 
items. 
4.   By pressing the arrow button 
 on the MENU/ENTER 
Button 
  to enter the selected menu items. 
5. By pressing the arrow button 
 on the MENU/ENTER 
Button 
  to return the previous menu. 
 
 
 
 
6-2 Record Mode 
 
 
Record Mode offers you a quick and easy way to take the ideal 
pictures you want. 
1. Turn the Mode Dial 
 to Record Mode 
. 
2. Using the lens cover located on the front of the camera to turn 
on/off camera. After turn on the camera, and then the last 
image recorded appears on the LCD monitor. 
3. Press and hold the Shutter button down half way to focus the 
objects. The camera will process metering and a yellow [ ] 
will appears in the center position of LCD monitor. Press and 
hold the Shutter button continually and it will keep the 
metering value. Press the Shutter button down fully and 
release the Shutter button. Then you will hear two beeps 
sound and take a picture completely.  
4. When taking a picture, you can press the Flash Button 
 
to set the desired flash modes: Auto, Red-eye reduction, and 
Off. 
5. Press the Mode Display Button 
 to choose your 
favorite LCD display and there are five display modes: 
Standard Display, Full Display, Image Only, LCD Monitor Off, 
Only Operation Settings. 
Chapter 6 Getting Started   
						

							    
   
 
 
21 
6. Using the MENU/ENTER Button 
  to set the details 
settings for recording images, e.g, Image Resolution, 
Image Quality, Self-timer, and Light Frequency settings. 
By pressing the 
  button on the center of the 
MENU/ENTER Button 
    button, the menu items will 
appears on the LCD monitor. Pressing the arrow buttons 
 / 
 / 
 / 
 on the MENU/ENTER Button 
 to 
move and select the desired menu items. 
7. By pressing the arrow buttons 
 / 
 on the 
MENU/ENTER Button 
  to adjust the digital zoom and a 
message of digital zoom will appears on the left side of the 
LCD Monitor. 
8. Slide down and up the Macro Button at the side of camera 
to enable the Macro photography. 
After you selected the Macro Mode, the Macro LED located 
on the top of the LCD monitor will light green. 
※If the low batteries power icons appears on the LCD Monitor, 
please change the new batteries immediately for keep the 
camera operating normally. 
KIf the Memory is not enough! warning message appears on 
the LCD Monitor. It means the memory card is full, please 
removing the memory card and insert a new one 
immediately. 
6-3 Play Mode 
 
In Play Mode, users can review the recorded still and movie 
pictures. To review the pictures, perform the following:     
1. Turn the Mode Dial  to Play Mode 
. 
2. Using the lens cover located on the front of the camera to turn 
on/off camera. After turn on the camera, and then the last 
image recorded appears on the LCD monitor. 
3. By pressing the arrow buttons 
 / 
 on the 
MENU/ENTER Button 
  to review the previous and back 
image. 
4. By pressing the 
  button on the center of the 
MENU/ENTER Button 
  button, you can enable the 
Delete, Slideshow and DPOF functions. 
5. By pressing the arrow button 
 on the MENU/ENTER 
Button 
  to enter the selected menu items. 
6. By pressing the arrow button 
 on the MENU/ENTER 
Button 
  to exit the menu. 
KDPOF function can only be operated with the memory card 
inserted.  
KIf there is no image stored in the internal memory or memory 
card, a “No picture” message pops up on the LCD Monitor in 
 the Play Mode.   
						

							    
   
 
 
22 
KPress the Mode Display Button 
 to review the images 
when the camera is power off. Press the Mode Display 
Button again will turn off the LCD Monitor.  
 
6-4 Movie Mode 
 
 
You can use Movie Mode to record movie pictures (not including 
audio). To record the movie pictures, perform the following: 
1. Turn the Mode Dial 
 to Movie Mode 
. 
2. Using the lens cover located on the front of the camera to turn 
on/off camera. After turn on the camera, and then the last 
image recorded appears on the LCD monitor. 
3. Press the Shutter button to start recording. Press the Shutter 
button again to stop recording. 
4. The LCD Monitor will show the recorded time (seconds) while 
you are recording the movie pictures. 
L To record the movie pictures, the maximum recording time will 
depending on the free space of the memory card. 
 
 
 
 
 
6-5 PC Mode 
 
 
z To select the PC Camera or Mass Storage items in the PC 
Connection menu, perform the following: 
1. Power on the camera and turn the Mode Dial 
 to PC. 
The PC Camera and Mass Storage two menu items will 
appears on the LCD Monitor. 
2. Pressing the arrow buttons 
 / 
  on the MENU/ENTER 
Button 
  to move and select the desired menu items. 
Pressing the 
 or 
  button to confirm and save the 
settings. 
3. If a “Connect USB” message pops up on the LCD Monitor, 
please connect the USB cable to the camera and PC to 
complete the configuration. 
※Once save the settings, the camera will keep these menu 
settings before you change them again.   
						

							    
   
 
 
23 
6-6 TV-Out Operation Using the TV-Out function offered by the camera, you can 
transfer the images to the other display devices, e.g. TV or 
computer. To transfer the images, perform the following:  
 
1. Please select the correct video type for the connected device 
before transferring images. Turn the Mode Dial 
 to Setup 
Mode 
  and then select correct video output types for your 
selection: NTSC or PAL. 
2. Please process this function; please use the video cable 
provided with the camera to connect the camera and output 
device. 
3. You can turn on the camera. There will no images shown on 
the LCD Monitor. All the images and information will shown on 
the output devices display via the video output cable. 
LYou can perform the camera normally when enable the TV-Out 
function. The only difference is the location to show the images, 
and image information will be form LCD Monitor to video 
output devices display. LWhile using the camera, after you connect the video cable to 
the camera, the images will be no longer shown on the LCD 
Monitor. If you want to restore the display status on the LCD 
Monitor, please disconnect the video cable from the camera. 
 
   
						

							    
   
 
 
24 
7-1 Installing the Camera Driver for PC  
You can use the PC Camera and Mass Storage functions of the 
camera via PC. To install the proper camera driver, perform the 
following:
 
 
1. Insert the software CD-ROM supplied with the package into 
the CD-ROM drive. 
2. The Auto-run program will be executed and the welcome 
screen appears: 
(If your CD-ROM drive doesnt support the auto-run function. 
Please double click on the My Computer icon on the 
desktop. Double click the CD-ROM drive icon and click the 
InstallMgr.exe file in the root directory. 
 
 3. Click the Install Vivicam3330 driver to install driver,   
and the screen will appear as following: 
 
4. Click the Next to continue the setup program. After you 
installed camera driver successfully, a message will appears 
on the screen as following:  
Chapter 7 Driver Installation   
						

							    
   
 
 
25 
5. Click Finish to restart the computer and finish the 
camera driver installation. 
 7-2 Installing the Applications for PC
 
Install Arcsoft Software (Take Photo Impression 
Installation for example) 
 
1. Insert the software CD-ROM supplied with the package into 
the CD-ROM drive. 
2. The Auto-run program will be executed and the welcome 
screen appears: 
(If your CD-ROM drive doesnt support the auto-run 
function. Please double click on the My Computer icon 
on the desktop. Double click the CD-ROM drive icon and 
click the InstallMgr.exe file in the root directory.  3. Click the Arcsoft PhotoImpression to install,   
and the screen will appear as following: 
 
 
 
4. Select the language for installation. Click OK to confirm your 
selection. 
 
 5. You will see the Welcome screen. Click Next to continue.    
						

							    
   
 
 
26 
 6. Enter Software License Agreement window.   
Please click Ye s to continue installation. 
 
7. Please follow the instructions of installation Wizard to 
select a destination folder and components you need.  
 
 
     
      8. Please select the program folder you want to install  
 
    9. When the installation is completed, the window below will   
appear. Click Finish to end the installation.   
						

							    
   
 
 
27 
 
7-3 Camera Setting on Windows XP When you plug-in the camera and select PC Camera Mode on 
Windows XP Operate System, system will configure the 
device automatically and the following screen will appear: 
 
 
 
1. users should click Next button. 
  
 
2. Users should click Continue Anyway button   
						

							    
   
 
 
28 
 
 
3. Users should click Next button. 
  
 
4. Users should click Continue Anyway button and complete 
the camera setting on Windows XP.