Vivitar Vivicam 3330 User Manual

    
   
 
 
10 
3-8 Mode Display Button 
 
1.This button is only working in the Record Mode. Press this 
button you can change the LCD monitor to several displays.   
Standard 

    
   
 
 
11 
4-1 Mode Selection
 
 
  
 
4-2 Record Mode 
 
 

    
   
 
 
12 
4-3 Play Mode 
 
   
 
 
 
 
 
 
 
 
(1) Possible number of shots 
(2) Remaining battery power 
(3) Mode Selection 
Index for Quick Menu: 
1. Delete Pictures 
 
 
 
  
 2. Slideshow 
 
 
3. DPOF (Digital Print Order Format) Settings 
 
●With DPOF for printing your images, there are three options 
for you: print one image, print all images and print the 
recorded date or not. 
●DPOF function can only be operated with the printer settings 
of the memory card inserted, not active with...

    
   
 
 
13 
 
 
 
                        
 
                    
 
                 
 
                    
 
 
 
 
 
 
 
 
 
 
4-4 Movie Mode 
 
 
 
 
 
  
 
 
 
 
 
 
          
 
 
 
(1) Movie Mode 
(2) Recorded Movie Time (seconds) 
(3) Recording the movie pictures 
(4) Remaining battery power 
(5) Time/Date  

    
   
 
 
14 
4-5 Setup Mode
 
 
 
1. Image Resolution 
 
 
 
 
1600x1200          1280x1024         640x480 
 
 
 
2.Image Quality: 
(Fine Quality)       (Basic Quality) 
 
 
 
 
 
 3. Self-timer 
        (On)               (Off) 
 
 
 
 
4. White Balance:   
        (Auto)             (Sun) 
 
 
                                            
                    (Fluorescent)       (Tungsten) 
 
 
 
 
 
 
 
 
 
   

    
   
 
 
15 
5. EV Compensation 
 
 
6. OSD Language 
 
 
 
 
 
7. Date/Time 
                         
              
 
 
 
                         
               
 
 8. Reset to default factory anticipated settings 
 
 
9. Format Media 
 
 
※ If there is a memory card inserted, it will only format the 
memory card, not the internal memory. 
 
10. TV-Out Operation 
 
 
 
 
 
 
 
 
   

    
   
 
 
16 
11. Light Frequency 
 
Select the correct frequency type (50Hz or 60Hz) according to 
your region. 
 
   

    
   
 
 
17 
5-1 Attaching the Strap 
 
●Insert the thin end of strap into the strap holder. . 
●Pass the other end of strap through the loop.  
●Stretch the strap tightly. 
 
5-2 Loading Batteries ●Turn off the power of camera. 
Insert 2 x AA alkaline batteries or a rechargeable battery. 
Please make sure the batteries are full of power. If the 
batteries are in low power, please change the new batteries 
as soon as possible for keep the camera operating normally. 
  
 
 
●Slide the switch on the...

    
   
 
 
18 
 
 
●Close and lock the battery cover. 
 
NOTE:  
Do not open the cover roughly to avoid damaging the battery 
compartment cover. 
KIf the battery power indicator shows only one black block that 
means the power is wear, you can continue to use the flash.
  
KWhen the battery indicator turns red, you cannot take still and 
movie pictures any more. 
 
5-3 Loading and Removing the Memory Card 
z Make sure to turn off the camera. 
1. Loading the memory card.  
 
●Slide the switch on the...

    
   
 
 
19 
●Press the memory card down gently. 
 
●The memory card will bounce upward.  
●Pull the memory card out with your fingers in the correct 
direction. 
 
NOTE: 
Before using the camera, please remember to insert the 
memory card into the slot. If the memory card is full or there 
are already images stored in it, you can turn the Mode Dial 
 to Setup Mode 
  and then select Format item to 
format the memory card. Please make sure you had backup 
the important data stored in the memory card....