Vivitar Vivicam 3330 Quickstart Guide

							Downloaded from www.Manualslib.com manuals search engine    
   
 
 
10 
3-8 Mode Display Button 
 
1.This button is only working in the Record Mode. Press this 
button you can change the LCD monitor to several displays.   
Standard 
						

							Downloaded from www.Manualslib.com manuals search engine    
   
 
 
11 
4-1 Mode Selection
 
 
  
 
4-2 Record Mode 
 
 

						

							Downloaded from www.Manualslib.com manuals search engine    
   
 
 
12 
4-3 Play Mode 
 
   
 
 
 
 
 
 
 
 
(1) Possible number of shots 
(2) Remaining battery power 
(3) Mode Selection 
Index for Quick Menu: 
1. Delete Pictures 
 
 
 
  
 2. Slideshow 
 
 
3. DPOF (Digital Print Order Format) Settings 
 
●With DPOF for printing your images, there are three options 
for you: print one image, print all images and print the 
recorded date or not. 
●DPOF function can only be operated with the printer settings 
of the memory card inserted, not active with internal memory. 
※If no memory card inserted, even there are images stored in 
the internal memory, the DPOF function will be disabled. 
 
  
Start Auto Play   
						

							Downloaded from www.Manualslib.com manuals search engine    
   
 
 
13 
 
 
 
                        
 
                    
 
                 
 
                    
 
 
 
 
 
 
 
 
 
 
4-4 Movie Mode 
 
 
 
 
 
  
 
 
 
 
 
 
          
 
 
 
(1) Movie Mode 
(2) Recorded Movie Time (seconds) 
(3) Recording the movie pictures 
(4) Remaining battery power 
(5) Time/Date  
						

							Downloaded from www.Manualslib.com manuals search engine    
   
 
 
14 
4-5 Setup Mode
 
 
 
1. Image Resolution 
 
 
 
 
1600x1200          1280x1024         640x480 
 
 
 
2.Image Quality: 
(Fine Quality)       (Basic Quality) 
 
 
 
 
 
 3. Self-timer 
        (On)               (Off) 
 
 
 
 
4. White Balance:   
        (Auto)             (Sun) 
 
 
                                            
                    (Fluorescent)       (Tungsten) 
 
 
 
 
 
 
 
 
 
   
						

							Downloaded from www.Manualslib.com manuals search engine    
   
 
 
15 
5. EV Compensation 
 
 
6. OSD Language 
 
 
 
 
 
7. Date/Time 
                         
              
 
 
 
                         
               
 
 8. Reset to default factory anticipated settings 
 
 
9. Format Media 
 
 
※ If there is a memory card inserted, it will only format the 
memory card, not the internal memory. 
 
10. TV-Out Operation 
 
 
 
 
 
 
 
 
   
						

							Downloaded from www.Manualslib.com manuals search engine    
   
 
 
16 
11. Light Frequency 
 
Select the correct frequency type (50Hz or 60Hz) according to 
your region. 
 
   
						

							Downloaded from www.Manualslib.com manuals search engine    
   
 
 
17 
5-1 Attaching the Strap 
 
●Insert the thin end of strap into the strap holder. . 
●Pass the other end of strap through the loop.  
●Stretch the strap tightly. 
 
5-2 Loading Batteries ●Turn off the power of camera. 
Insert 2 x AA alkaline batteries or a rechargeable battery. 
Please make sure the batteries are full of power. If the 
batteries are in low power, please change the new batteries 
as soon as possible for keep the camera operating normally. 
  
 
 
●Slide the switch on the battery cover in the direction indicated 
by the arrow. 
  
 
●Insert the batteries as indicated on the inner side of the cover.  
Chapter 5 Preparing Your Camera   
						

							Downloaded from www.Manualslib.com manuals search engine    
   
 
 
18 
 
 
●Close and lock the battery cover. 
 
NOTE:  
Do not open the cover roughly to avoid damaging the battery 
compartment cover. 
KIf the battery power indicator shows only one black block that 
means the power is wear, you can continue to use the flash.
  
KWhen the battery indicator turns red, you cannot take still and 
movie pictures any more. 
 
5-3 Loading and Removing the Memory Card 
z Make sure to turn off the camera. 
1. Loading the memory card.  
 
●Slide the switch on the battery cover in the direction indicated 
by the arrow.   
●Insert the memory card in the direction of the arrow.  
 
2. Removing the memory card    
						

							Downloaded from www.Manualslib.com manuals search engine    
   
 
 
19 
●Press the memory card down gently. 
 
●The memory card will bounce upward.  
●Pull the memory card out with your fingers in the correct 
direction. 
 
NOTE: 
Before using the camera, please remember to insert the 
memory card into the slot. If the memory card is full or there 
are already images stored in it, you can turn the Mode Dial 
 to Setup Mode 
  and then select Format item to 
format the memory card. Please make sure you had backup 
the important data stored in the memory card.  
K There is 8MB internal memory built-in in the camera for 
saving your data: 
If there is a memory card inserted, it will be the top priority for 
saving data. 
If you want to store data in the internal memory, please 
remove the memory card first. 
●The specification of memory card applicable to this camera is 
SD or MMC (4/8/16/32/64/128MB). 
●If inserting the memory card in the wrong direction, it cannot 
be fit in. Do not insert the card roughly to avoid damage. 
●If the camera detects no memory card, please gently wipe the 
metal interface of the card with a soft cloth and reloading the 
card again. 
 
5-4 Setting Up the OSD Language Before using the camera, please turn the Mode Dial to Setup 
Mode 
  and then select Language to set the OSD 
language. There are 3 options for your selection: English, 
Traditional Chinese, and Japanese. 
 
5-5. Date/Time Before using the camera, please turn the Mode Dial to Setup 
Mode 
  and then select Date/Time to set the date and 
time.