Vivitar Vivicam 2750 User Manual

 20
Using the Flash
The digital camera has three different flash modes: Auto (the default mode);
Fill; and Off. Each of these modes can be accessed via the Flash button on
the backside of the camera.
■    Auto - the camera automatically fires the flash when the brightness of
   the subject or scene is too low.
■    Fill - fires the flash regardless of the brightness levels in the vicinity.
   However, the strength of the flash varies according to the ambient
   brightness of your surroundings, so the...

 Connecting to Your Computer
1   Plug one end of the serial cable into the printer or modem port (on a
    Macintosh) or a COM port (on a PC). These ports are located at the
    back of your computer.
2  Connect the other end of the serial cable to the camera.
3  Turn on your camera.
21
The  video output connector allows you transmit stored
images (640x480 in size) or live video to a standard
television set. When the LCD monitor is off, the camera
cannot output via this port. To transmit stored images...

 To download images to your computer, you need to attach the digital cable
to the digital port below the video port, and the other end of the cable to
the back of your computer. Once both ends are properly attached, use the
software included with this camera to capture the queued images stored
within it to your computer’s hard disk, where you can later print them out or
edit them in imaging software.
The camera’s digital output connector can be set to transmit data at varying
baud rates, depending upon...

 23
Appendix 1 : LCD Icons
Here’s a summary of all the icons found in the LCD screen of the digital
camera, and what they mean.
Fill Flash
No Flash
Auto Flash
Self-Timer on
Full battery power
Half battery power
Low battery power
Locked file (can’t be erased)
Fine Quality mode
Normal Quality modeCopy images to memory card
Erase all image in camera memory
Erase one image from camera memory
Set time and date
Set auto shut off
Set auto play
Exit
Confirm
Save to Build-in Memory
Save to Compact Flash Card...

 Appendix 3 : Digital Camera Specifications
Image Sensor:         1/4" CCD, with 350,000 pixels
LCD Display:           1.8" color display with 15 image/sec for movie-like  display
Image Resolution:  640 x 480 pixels
Color:                       24-bit (1.67 million colors)
Memory:                   512 KB (or 2MB) internal flash memory
Storage:                   min. 8 pictures with JPEG data compression in
                                  512K built- in memory....

 Appendix 4 :
Specification and Operation of  FotoPrint 600
This camera comes with an optional device for images direct printing
without connecting any computer. Via connecting with the digital camera
and the compatible printers, this device allows you to take a photo and
print out immediately at fine photo quality just the  same as what you can
print from computer. No more hassle of using PC; no more need of
developing film, just one single touch and get the photo.
Specifications
Picture selection...