Vivitar Vivicam 25 Users Manual

 
  10 
CAPTURE MODE The capture mode setting options are: 
Photo  
  Self-Timer 
  Video 
  Continuous 3 shot   
Taking Photos  1. Power on the camera, and it enters Camera mode – a camera icon is displayed on top left of the Preview Screen. 2. Compose your shot using the viewfinder.  
3. Hold the camera steady and press the Shutter button to take the photo.  4. The camera will beep when a photo is taken. 5. The photo is save as a JPEG file in the camera`s memory 6. The LCD screen will display the...

 
  11 
1. Download all the photos and videos from you camera to your computer.  2. After the images have been downloaded and appear on your computer you should delete all the images from your camera.   3. Once your camera memory is empty you are now ready to take more photos and videos.   
Using the Self-timer 1. Press the Menu button once to enter the menu. 
2. Press the Shutter button until the  icon appears in the Capture mode icon area of Preview Screen. 3. Press the Menu button again to save the...

 
  12 
Taking 3 Continuous Shots  1. Press the Menu button once to enter the menu. 
2. Press the Shutter button until the  icon appears Capture mode icon area of Preview Screen. 3. Press the Menu button again to save the choice and exit the menu. 4. The 3 Continuous Shots icon now appears in the top left corner of the Preview Screen. 5. Press the Shutter button. The camera will now automatically take 3 continuous photos one after the other.   
Playback Mode The Playback Mode enables you to preview the...

 
  13 
When playing the video file, the elapsed time will appear on the bottom right corner of the Preview Screen.   
Photo Resolution and Quality 
 
Resolutions Selection There are 3 photo resolutions to select from: 
2.1M (1600 x 1280) 
1.3M (1280 x1024) 
VGA (640 x 480) 
 
To Select the desired photo resolution: 
1. Press the Menu button once to enter the menu. 2. Press the Left/Right button to select the resolution setting icon. 3. Press the Shutter button to select the desired resolution: 
 The...

 
  14 
 
Photo Quality Selection There are 2 photo quality options to select from: ---Higher quality- large file size, less photos stored in memory ---Normal quality- smaller file size, more photos stored in memory  To select the desired quality setting:     1. Press the Menu button once to enter the menu. 2. Press the Left/Right button to select the quality setting icon. 
3. The   icon means the current quality is higher quality. 
4. To change to normal quality, press the Shutter button until the...

 
  15 
Electric Current Frequency Setting  The camera has 2 Frequency settings: ---60 Hz  ---50 Hz Set the camera for the correct frequency according to the electric current frequency in the area where you are: 
1. Press the Menu button once to enter the menu.  
2. Press the Left/Right buttons to select the frequency setting icon. If the  icon appears this means the current frequency setting is 60Hz. 
3. To change to 50Hz, press the Shutter button until the  icon appears. 4. Press the Menu button to...

 
  16 
To delete A Single File 1. Press the Playback button once to enter the Playback mode. 2. Press the Left/Right buttons to select the file to be deleted. 3. Press the Menu button once for the delete selected file confirmation screen to appear. 4. Press the Left/Right buttons to select “Yes” or “No”. 5. If „Yes‟, press the Shutter button to confirm deletion. This will erase the selected file stored on the camera. 6. If „No‟, the camera will revert to the main menu icons screen.  
Important: Please...

 
  17 
1. Insert the installation CD into your CD-ROM drive. The Vivitar Experience Image Manager will begin  to install both the camera driver and Image Manager Software at the same time 2. Please review the license terms. On PC and Macintosh: Click the “I accept the terms of this license agreement” and then click “Next” to continue. 3. On PC only: Let the “Vivitar Experience Image Manager” installer create the folder to where the program will be installed, and then click “Install”.  4. Please wait...

 
  18 
4. On a Windows PC the first time you connect the device to the computer you will have to wait a few moments until the computer recognizes the device.       
Get photos and videos from your camera to your computer 
Do not disconnect the cable during transfer. Doing so will cancel the transfer of any files on their way to your computer.  1. Select the “Get Images” button from the Main menu.                2. The “Get media from device” window opens.  

 
  19 
3. Both photos and videos (if you have captured any) will get downloaded. 4. Select your camera model from the device window. If your camera is the only device connected then it will be selected automatically. 5. Select a location on the computer where to place the new photo and video files. 6. Add the new photo and video files to albums if desired. 7. Select to remove the media files from the selected device after the import. 8. Click the “Get Images” button to transfer the photos and videos...