Vivitar V10b User Manual

  4.3 Self-timer Capture   n Press  Mode  select to 
n Press  Shutter      
n The self-timer LED will blink and the camera will beep for 10 seconds. 
n Camera will take an image. 
¬ If you want to exit the  Self-timer capture  function  
press  Mode  select to 
 
4.4 Using Flash  n        : Auto Flash mode (flash fires automatically when  required by current exposure setting.) 
  
n        : Off Flash mode  n The flashs working range is 0.8~1.5 meters, (Best is 1.0~1.2 meters) 
n When taking images with...

  n 4.5 Continuous Capture  n Press  Mode  select to      (The camera will  
automatically switch to CIF mode)              n Press  Shutter  continuously to take pictures.     
n           Picture counter will continuously accumulate.   
n STOP : Continuous capture stops when your finger leaves  the shutter button or memory is full.  4.6 Delete Pictures   1. Delete all pictures:        
n Press   Mode  select to  n Press   Select    until you hear 2 beeps  n             The camera will delete all...

  
4.7 Selecting the image resolution 
n  :640 x 480 pixels (default setting) 
(The camera should take about 50 images) 
n  : 320 x 240 pixels 
        (The camera should take about 160 images)                  
4.8 Selecting a shooting environment  n           : Outdoor 1 (Default setting. Use this setting for taking pictures outdoors on a cloudy day.)  n           : Outdoor 2 (Optional. Use this setting for taking pictures outdoors on a sunny day.) 
  
n           : ndoor 1 (Optional. Use this setting...

  
5. Installing Driver and Utility Software 
5.1 Computer System Requirements     Please check your PC system requirements before      installing the software :      1. Windows 98, ME, 2000, XP      2. Pentium or higher CPU       3. CD-ROM drive      4. Mouse      5. USB port  5.2 Installation of Vivicam TWAIN Driver and AVI Maker on Windows 98, ME and 2000      1. Turn on your computer      2. lnsert the camera software CD into the CD-ROM drive, the following Window will appear :    
Click on lnstall...

  3. To display the list of languages available, click on the    down arrow and highlight your selection. 
  
Click  OK  to proceed to next step. 
4. Your computer will display:  
Click  Next  and follow setup procedure. 
   

  5. The TWAIN driver and AVI Maker installation is complete.  
Click  Finish  to finish installation. 
5.3 Installation of Vivicam TWAIN Driver and AVI Maker on Windows XP  
 1.Insert the CD installation disk into your CD-ROM drive. 
 2.The Vivicam Installation Menu appears. Click Install 
Vivicam 
 Twain Driver on the Software Installer dialog box. (Or 
double click the CD drive icon in My Computer and run 
InstallMgr.exe in the root directory of the CD.)    

   
3. Follow the on screen instructions to complete the installa-   ation and it will finish installing all the necessary files on    your computer. 
4. Please plug-in your Vivicam with USB cable. 
5. System will detect Vivicam. 
6. When the Found New Hardware Wizard window appears, please select Install from a list or specific location 
[ Advanced],and click Next to continue. 
  
   

  7. When the following window appears, please select Search  removable media [floppy, CD-ROM...] , and click Next to 
continue.  
 
8. Files are copied as the following screen appears: 
    

  9. Click Finish to continue the installation.   
10. The Found New Hardware Wizard window appears again.    Please select Install from a list or specific location     [Advanced], and click Next to continue.    

   
11. When the following window appears, please select Search removable media [floppy, CD-ROM...] , and click Next to 
 continue. 
  
 
12. System files are copied and the following screen appears: