Vivitar Dp 1500x Projector User Manual

EN-10
aaaaaaaaa
User’s ManualProjector
Setup
This section tells you how to unpack, set up, and connect your projector to other
equipment. The projector must be connected to a computer or a video source such
as a video tape deck, camcorder, digital camera or notebook computer in order to
make a projection.  You may connect multiple sources to the projector such as a
computer and a video source.  You may also connect  a computer mouse to use  as
a controller.  Audio may be provided for one, or both, image...

EN-11
aaaaaaaaa
User’s ManualProjector
. ENGLISH .Setting Up the Projector
1. Place the projector on a sturdy, level surface preferably within five feet of the computer
or video source.
Caution:  Do not hold the projector by the lens. This can damage the lens.
2. Place the projector the correct distance from the screen.  Use the following table
as a guideline.  Alternatively, as a rough estimate for planning purposes, use this
guideline: For every unit (foot, meter) of screen width, the projector must be...

EN-12
aaaaaaaaa
User’s ManualProjector
Connecting to a Computer
The projector will always project at XGA (1024 x 768) resolution.  (XGA is the native
resolution of the projector.)  However, you can connect the projector to a computer
source capable of displaying VGA (640 x 480), SVGA (800 x 600),  XGA, or SXGA
(1280 x 1024) resolutions.   The projector will resize VGA, SVGA, and SXGA inputs for
XGA projection. The types of computers supported by this projector include:
IBM compatible laptop, notebook or...

EN-13
aaaaaaaaa
User’s ManualProjector
. ENGLISH .Using the Projector
This section describes projector operations:
Turning the projector and A/V equipment on and off
Adjusting the projected image
Projector controls
Checking the Projector status
Turning the Audio/Visual (A/V) Equipment On and Off
It is preferable to turn on the projector and related A/V equipment in the following
order: Projector, Computer, Video source, Audio source
Turning the Projector On
1. Connect the power cord to the projector...

EN-14
aaaaaaaaa
User’s ManualProjector
Focusing and Sizing the Projected Image
When the projected image appears on the screen, adjust the focus and size:
To adjust the focus, rotate the focus ring, which is the outer ring on the
projector lens (Page 6, item 2)
To adjust the size of the image, rotate the zoom ring (Page 6, item 1);   zooming out
to make the image larger or zooming in make it smaller on the screen
Operational Indicators (LEDs)
There are two LEDs on the top of the projector;  the POWER LED...

EN-15
aaaaaaaaa
User’s ManualProjector
. ENGLISH .
Projector Control Menus
Seven projector menus enable you to setup and control your projector:
Input menu - allows you to specify the input signal source
Image menu - allows adjustment of the projected image:  brightness, contrast,
saturation, sharpness, tint, gamma,  and color channel balance  (Y, R, G, B)
Computer menu - for fine tuning synchronization with a computer input signal
Audio menu - controls audio features:  volume, input selection, and mute...

EN-16
aaaaaaaaa
User’s ManualProjector
To change a menu setting using the Projector Control Panel:
1. Press the MENU button to invoke the Main Menu.  Note: press MENU once again
to hide the menu - acting like the ESC button on the remote controller.
2. Press the SELECT button to scroll through the menu tree - like the controller
button on the remote controller
3. To change a specific setting, use the + or – buttons (Keystone buttons)
4. Press the SELECT button to confirm your selection
5. Press the MENU...

EN-17
aaaaaaaaa
User’s ManualProjector
. ENGLISH .
  Menu Sub-menu Description
ComputerComputer input signal
ComputerSignal from computer (desktop or notebook)
DVI Signal from DVI (Digital Video Interface) device
HDTVSignal from HDTV (High Definition TV - a
high-resolution TV standard, which is part of
the group of digital TV standards introduced in
USA in late 1998)
Video Video input signal
YCbCrComponent video signal
S-Video S-Video signal
VideoComposite video signal
PIP Displays additional image...

EN-18
aaaaaaaaa
User’s ManualProjector
Image Menu
The image menu, and sub menus,  provide precise control of  the projected image
including:  brightness, contrast , intensity, saturation, sharpness (computer signal),
sharpness (video signal), tint, gamma (computer signal), gamma (video signal),
and color channel balancing (Y, R, G, B).
Image Main Menu Picture  Sub-menu
Independent Color ControlGamma Sub-menu
(ICC) Sub-menu
1. Press the MENU button
2. Use the thumb pad or SELECT button to select the Image...

EN-19
aaaaaaaaa
User’s ManualProjector
. ENGLISH .  Menu Sub-menu Description
PictureAdjusts the properties of the projected image
BrightnessThe higher the setting, the brighter the projection
The lower the setting, the darker the projection
ContrastThe higher the setting, the greater the contrast
The lower the setting, the lower the contrast
Intensity The amount of white contained in a color
The higher the setting, the whiter the image
The lower the setting, the less white the image
SaturationThe...