Vivitar 3615 User Manual

  
 
Vivicam 3615 User Manual 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
English 021009 
  

FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 
(1) this device may not cause harmful interference, and 
(2) this device must accept any interference received, including interference that may cause undesired operation. 
Note: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 
of the FCC rules. These limits are designed to provide reasonable protection against harmful...

Warnings ■ 
Do not use this camera if it is emitting smoke, becomes unusually hot to be touched, emitting any unusual odor or noise, or 
if it is in any other abnormal states. Operating the camera in any of these situations may cause a fire or an electrical shock. 
Stop using the camera immediately, turn the camera off, and then disconnect the power source (batteries or AC power 
adapter). (If you are using the AC power adapter, unplug the adapter from the AC power outlet after you have 
disconnected the...

■ 
Do not insert or drop metallic or inflammable foreign objects into the camera through access points such as the Compact 
Flash card slot.    This may cause a fire or an electrical shock. 
■ 
Do not attempt to modify this camera. This may cause a fire or an electrical shock. 
■ 
Do not remove the camera casing. This may cause an electrical shock. Internal inspection, maintenance and repairs should 
only be carried out by your dealer or local authorized service facility. 
■ 
Avoid using this camera in...

■ 
When handing the camera, always unplug it from the power source (batteries or AC power adapter) for safety. (if you are 
using the AC power adapter, unplug the adapter from the AC power outlet after you have disconnected the camera.) 
Failure to do may result in an electrical shock. 
■ 
When leaving the camera unused for long periods, such as during a vacation, always unplug the camera from the power 
source (batteries or AC power adapter) for safety. (if you are using the AC power adapter, unplug the...

 Quick Start 1. Taking Pictures→
Refer to page 10
 
Switch the Mode Dial to Record
→use the Viewfinder or LCD Monitor to frame the 
image→press and hold the Shutter button down halfway until the focus is locked→press 
the Shutter button down fully 
2.  Playing Back Images→
Refer to page 16
 
Switch the Mode Dial to Play
→
select the image you are searching by the Arrow 
buttons(
)  

 3. Erasing Images→
Refer to page 19
 
Switch the Mode Dial to Delete
→select Delete Current→press the OK button→
select the image you want to delete by the Arrow buttons(
)→press the OK button to 
confirm  
4.  Transferring Images to Your Computer→
Refer to page 37
 
You can copy images onto your computer and view and modify images using the 
supplied USB cable and application software.    Perform the steps below: 
   
PC: Install the camera driver (for Win98)→connect one end of the USB cable to your...

 
 
Table of Contents 
INTRODUCTION ............................................................................................................ 1
 
PACKAGE 
C
ONTENTS
....................................................................................................... 1
 
What’s Inside?............................................................................................................. 1
 
Optional Accessories...

 
 
BASIC PHOTOGRAPHY ............................................................................................. 10
 
TAKING 
P
ICTURES
......................................................................................................... 10
 
Using the Viewfinder................................................................................................. 10
 
Using the LCD Monitor ............................................................................................ 11
 
Digital...

 
 
Quickview ................................................................................................................. 23
 
White Balance ........................................................................................................... 24
 
EV Compensation ..................................................................................................... 25
 
P
LAY 
M
ODE...