ViewSonic VX2239wm Manual

ViewSonicVX2239wm 9
Adjusting the Screen Image
Use the buttons on the front control panel to di splay and adjust the OSD controls which display 
on the screen. The OSD controls are explained at  the top of the next page and are defined in 
“Main Menu Controls” on page 11.
Main Menu
with OSD controls
Scrolls through menu options and adjusts the displayed control. Audio Adjust (T) / Brightness/Contrast  ( S)
Displays the control screen for the highlighted control. Also toggles between two controls on some...

ViewSonicVX2239wm 10
Do the following to ad
just the display setting:
1. To display the Main Menu, press button [1].
NOTE:  All OSD menus and adjustment screens  disappear automatically after about 15 
seconds. This is adjustable through the  OSD timeout setting in the setup menu.
2. To select a control to adjust, press SorT to scroll up or down in the Main Menu.
3. After the desired control is se lected, press button [2]. A cont rol screen like the one shown 
below appears.
4. To adjust the control,...

ViewSonicVX2239wm 11
Main Menu Controls
Adjust the menu items shown below by using the up  S and down  T buttons.
Control Explanation
Auto Image Adjust  automatically sizes, centers, a nd fine tunes the video signal 
to eliminate waviness and distortion. Pr ess the [2] button to obtain a sharper 
image.
NOTE:  Auto Image Adjust works with most common video cards. If this 
function does not work on your LCD display,  then lower the video refresh rate 
to 60 Hz and set the resolution to its pre-set...

ViewSonicVX2239wm 12
Control Explanation
Color Adjust provides several color adjustment  modes, including preset color 
temperatures and a User Color mode wh ich allows independent adjustment of 
red (R), green (G), and blue (B). The  factory setting for this product is 6500K 
(6500 Kelvin).
sRGB- This is quickly becoming the industry standard for color management, 
with support being included in many of th e latest applications. Enabling this 
setting allows the LCD display to more accurately display...

ViewSonicVX2239wm 13
Control Explanation
Information displays the timing mode (vid eo signal input) coming from the 
graphics card in the computer, the LC D model number, the serial number, and 
the ViewSonic
® website URL. See your graphics card’s user guide for 
instructions on changing the resolution an d refresh rate (vertical frequency).
NOTE:  VESA 1920 x 1080 @ 60Hz (recommended) means that the resolution 
is 1920 x 1080 and the refresh rate is 60 Hertz.
Manual Image Adjust  displays the Manual...

ViewSonicVX2239wm 14
Control Explanation
Dynamic Contrast  allows the user to turn the  contrast ratio enhancement on or 
off.
Response Time  adjusts the response time of  liquid-crystal display for image 
quality enhancement.
Standard  sets response time to normal speed.
Advanced  sets response time to higher speed.
Ultra Fast  sets response time to highest speed.
Aspect ratio  Selects the image size for 4:3 and full screen.
Display Mode  provides two color space modes. The factory setting for this...

ViewSonicVX2239wm 15
Control Explanation
OSD Background  allows the user to turn the OSD background On or Off.
Auto Power Off , if enabled, will power off the display automatically when no 
signal is detected for 3 minutes.
Sleep  Set up the auto power off time for  30/45/60/120 minutes. (Its inactive in 
PC mode only)
Memory Recall  returns the adjustments back to f actory settings if the display is 
operating in a factory Preset Timing Mode  listed in the Specifications of this 
manual.
Exception:...

ViewSonicVX2239wm 16
Other Information
Specifications
1 Macintosh computers older than G3 require a ViewSonic® Macintosh adapter. To order an adapter, contact
ViewSonic. LCD
Ty p e
Display Size
Color Filter
Glass Surface TFT (Thin Film Transistor), Active Matrix 1920 x 1080 LCD,
0.248 mm pixel pitch
Metric: 55cm
Imperial: 22” (21.5” viewable)
RGB vertical stripe
Anti-Glare
Input Signal Video Sync RGB analog (0.7/1.0 Vp-p, 75 ohms)
HDMI/DVI-D (TMDS digital, 100ohms)
Composite Sync, Separate Sync, Sync on...

ViewSonicVX2239wm 17
Troubleshooting
No power
• Make sure power button (or switch) is ON.
• Make sure A/C power cord is secu rely connected to the LCD display.
• Plug another electrical device (l ike a radio) into the power outlet to verify that the outlet is
supplying proper voltage.
Power is ON but no screen image • Make sure the video cable supplied with the  LCD display is tightly secured to the video
output port on the back of the computer. If the  other end of the video cable is not attached...

ViewSonicVX2239wm 18
Customer Support
For technical support or product  service, see the table below or contact your reseller.
NOTE:  You will need the product serial number.
Country/RegionWebsite T = Telephone
F = FAXEmail
Australia/New Zealand www.viewsonic.com.au AUS= 1800 880 818
NZ= 0800 008 [email protected]
Canada www.viewsonic.com T (Toll-Free)= 1-866-463-4775  
T (Toll)= 1-424-233-2533
F= [email protected]
Europe www.viewsoniceurope.com www.views...