Home > ViewSonic > Monitor > ViewSonic VX1935wm Manual

ViewSonic VX1935wm Manual

    Download as PDF Print this page Share this page

    Have a look at the manual ViewSonic VX1935wm Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 617 ViewSonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							ViewSonicVX1935wm 9
    Adjusting the Screen Image
    Use the buttons on the front control panel to display and adjust the OSD controls which display 
    on the screen. The OSD controls are explained at the top of the next page and are defined in 
    “Main Menu Controls” on page 11.
    Main Menu
    with OSD controls
    Front Control Panel
    shown below in detail
    Scrolls through menu 
    options and adjusts the 
    displayed control.
    Also a shortcut to display 
    the Contrast adjustment 
    control screen.
    Displays the control screen for
    the highlighted control.
    Also toggles between two
    controls on some screens.
    Also a shortcut to Auto Image
    Adjust.Standby Power On/Off
    Power light
    Blue = ON
    Orange = Power Saving
    Displays the Main
    Menu or exits the
    control screen and
    saves adjustments.
     
    						
    							ViewSonicVX1935wm 10 Do the following to adjust the display setting:
    1.To display the Main Menu, press button [1].
    NOTE: All OSD menus and adjustment screens disappear automatically after about 15 
    seconds. This is adjustable through the OSD timeout setting in the setup menu.
    2.To select a control to adjust, pressSorTto scroll up or down in the Main Menu.
    3.After the desired control is selected, press button [2]. A control screen like the one shown 
    below appears.
    4.To adjust the setting, press the up S or down T buttons.
    5.To save the adjustments and exit the menu, press button [1] twice.
    The following tips may help you optimize your display:
    • Adjust the computers graphics card so that it outputs a 1440 x 900 @ 60Hz video signal to 
    the LCD display. (Look for instructions on “changing the refresh rate” in the graphics cards 
    user guide.)
    • If necessary, make small adjustments using H. POSITION and V. POSITION until the 
    screen image is completely visible
    . (The black border around the edge of the screen should 
    barely touch the illuminated “active area” of the LCD display.)
    The command line at the bottom of the
    control screen tells what to do next from
    this screen. You can toggle between control
    screens, adjust the selected option, or exit
    the screen.
     
    						
    							ViewSonicVX1935wm 11
    Main Menu Controls
    Adjust the menu items shown below by using the up S and down T buttons.
    Control Explanation
    Auto Image Adjust sizes and centers the screen image automatically.
    Contrast adjusts the difference between the image background (black level) 
    and the foreground (white level).
    Brightness adjusts background black level of the screen image.
    Input Select toggles between inputs if you have more than one computer 
    connected to the VX1935wm.
    Audio Adjust
    Vo l u m e increases the volume, decreases the volume, and mutes the audio.
    Mute temporarily silences audio output.
    Color Adjust provides several color adjustment modes, including preset color 
    temperatures and a User Color mode which allows independent adjustment of 
    red (R), green (G), and blue (B). The factory setting for this product is 6500K 
    (6500 Kelvin).
    sRGB-This is quickly becoming the industry standard for color management, 
    with support being included in many of the latest applications. Enabling this 
    setting allows the LCD display to more accurately display colors the way they 
    were originally intended. Enabling the sRGB setting will cause the Contrast and 
    Brightness adjustments to be disabled.
     
    						
    							ViewSonicVX1935wm 12
    Control Explanation
    9300K-Adds blue to the screen image for cooler white (used in most office 
    settings with fluorescent lighting).
    7500K - Adds blue to the screen image for cooler white (used in most office
    settings with fluorescent lighting).
    6500K-Adds red to the screen image for warmer white and richer red.
    5400K-Adds green to the screen image for a darker color.
    User Color Individual adjustments for red (R), green (G), and blue (B).
    1.To select color (R, G or B) press button [2].
    2.To adjust selected color, pressSandT.
    Important: If you select RECALL from the Main Menu when the product is 
    set to a Preset Timing Mode, colors return to the 6500K factory preset.
    Information displays the timing mode (video signal input) coming from the 
    graphics card in the computer, the LCD model number, the serial number, and 
    the ViewSonic
    ® website URL. See your graphics card’s user guide for 
    instructions on changing the resolution and refresh rate (vertical frequency).
    NOTE: VESA 1440 x 900 @ 60Hz (recommended) means that the resolution is 
    1440 x 900 and the refresh rate is 60 Hertz.
    Manual Image Adjust
     
    						
    							ViewSonicVX1935wm 13
    Control Explanation
    Horizontal Size adjusts the width of the screen image.
    H./V. Position (Horizontal/Vertical Position) moves the screen image left or 
    right and up or down.
    Fine Tune sharpens the focus by aligning text and/or graphics with pixel 
    boundaries.
    NOTE: Try Auto Image Adjust first.
    Sharpness adjusts the clarity and focus of the screen image.
    Setup Menu displays the menu shown below:
    Language Select allows the user to choose the language used in the menus and 
    control screens.
    Resolution Notice allows the user to enable or disable this notice.
    If you enable the Resolution Notice shown above and your computer is set at a 
    resolution other than 1440 x 900, the following screen appears.
     
    						
    							ViewSonicVX1935wm 14
    Control Explanation
    OSD Position allows the user to move the OSD menus and control screens.
    OSD Timeout sets the length of time the OSD screen is displayed. For example, 
    with a “30 second” setting, if a control is not pushed within 30 seconds, the 
    display screen disappears.
    OSD Background allows the user to turn the OSD background On or Off.
    Memory Recall returns the adjustments back to factory settings if the display is 
    operating in a factory Preset Timing Mode listed in the Specifications of this 
    manual.
     
    						
    							ViewSonicVX1935wm 15
    Other Information
    Specifications
    1 Macintosh computers older than G3 require a ViewSonic® Macintosh adapter. To order an adapter, contact 
    ViewSonic.LCDTy p e
    Color Filter
    Glass Surface19” (full 19 viewable diagonal area),
    TFT (Thin Film Transistor), Active Matrix WXGA LCD,
    0.285 mm pixel pitch
    RGB vertical stripe
    Anti-Glare
    Input SignalVideo
    SyncRGB analog (0.7/1.0 Vp-p, 75 ohms) / TMDS Digital (100ohms)
    Separate Sync,
    f
    h:30-82 kHz, fv:50-85 Hz
    CompatibilityPC
    Macintosh
    1
    Up to 1440 x 900 Non-interlaced
    Power Macintosh up to 1440 x 900
    ResolutionRecommended
    and supported1440 x 900 @ 60, 75 Hz
    1280 x 1024 @ 60, 70, 72 Hz
    1024 x 768 @ 60, 70, 72, 75, 85 Hz
    800 x 600 @ 56, 60, 72, 75, 85 Hz
    640 x 480 @ 60, 75, 85 Hz
    720 x 400 @ 70 Hz
    PowerVoltage 100-240 VAC, 50-60 Hz (auto switch)
    Display areaFull Scan 410.4 mm (H) x 256.5 mm (V)
    16.2 (H) x 10.1 (V)
    Operating
    conditionsTemperature
    Humidity
    Altitude41° F to + 95° F (0° C to + 35° C)
    20% to 80% (non-condensing)
    To 10,000 feet
    Storage
    conditionsTemperature
    Humidity
    Altitude-4° F to + 131° F (-20° C to + 55° C)
    20% to 80% (non-condensing)
    To 50,000 feet
    DimensionsPhysical 450 mm (W) x 434 mm (H) x 209 mm (D)
    17.7 (W) x 17.1 (H) x 8.2 (D)
    WeightPhysical 11.4 lb (5.2 kg)
    RegulationsBSMI, CCC, PSB, C-Tick, CE, MIC, VCCI,
    Ergo, Gost-R/Hygienic, SASO, MPR II,
    UL/cUL, FCC-B, ICES-B, NOM, TUV-S, E
    NERGY STA R®
    Power saving
    modesOn
    OffNormal              (blue LED)
    
    						
    							ViewSonicVX1935wm 16
    Troubleshooting
    No power
    • Make sure power button (or switch) is ON.
    • Make sure A/C power cord is securely connected to the LCD display.
    • Plug another electrical device (like a radio) into the power outlet to verify that the outlet is 
    supplying proper voltage.
    Power is ON but no screen image
    • Make sure the video cable supplied with the LCD display is tightly secured to the video 
    output port on the back of the computer. If the other end of the video cable is not attached 
    permanently to the LCD display, tightly secure it to the LCD display.
    • Adjust brightness and contrast.
    • If you are using an Macintosh older than G3, you need a Macintosh adapter.
    Wrong or abnormal colors
    • If any colors (red, green, or blue) are missing, check the video cable to make sure it is 
    securely connected. Loose or broken pins in the cable connector could cause an improper 
    connection.
    • Connect the LCD display to another computer.
    • If you have an older graphics card, contact ViewSonic
    ® for a non-DDC adapter.
    Control buttons do not work
    • Press only one button at a time.
     
    						
    							ViewSonicVX1935wm 17
    Customer Support
    For technical support or product service, see the table below or contact your reseller.
    NOTE: You will need the product serial number.
    Country/RegionWebsite T = Telephone
    F = FAXEmail
    United States www.viewsonic.com/supportT= 800 688 6688
    F= 909 468 [email protected]
    Canada www.viewsonic.com/support T= 866 463 4775 [email protected]
    United Kingdom www.viewsoniceurope.com/uk T= 0207 949 0307
    Europe, Middle 
    East, Baltic 
    countries, and North 
    Africawww.viewsoniceurope.com (Contact your reseller)
    Australia and New 
    Zealandwww.viewsonic.com.au/support/AUS= 1800 880 818
    NZ= 0800 008 [email protected]
    Singapore/Malaysia/
    Thailandwww.viewsonic.com.sg/support/ T= 65 64616044 [email protected]
    South Africa and 
    other countrieswww.viewsonic.comT= 886 2 2246 3456
    F= 886 2 2249 [email protected]
    India www.in.viewsonic.com T= 1800 11 9999 [email protected] 
    Hong Kong www.hk.viewsonic.com/support/ T= 852 3102 2900 [email protected]
    Macau www.hk.viewsonic.com/support/ T= 853 700 303 [email protected]
    Korea ap.viewsonic.com/kr/support/ T= 080 333 2131 [email protected]
     
    						
    							ViewSonicVX1935wm 18
    Cleaning the LCD Display
    • MAKE SURE THE LCD DISPLAY IS TURNED OFF.
    • NEVER SPRAY OR POUR ANY LIQUID DIRECTLY ONTO THE SCREEN OR CASE.
    To clean the screen:
    1.Wipe the screen with a clean, soft, lint-free cloth. This removes dust and other particles.
    2.If the screen still not clean, apply a small amount of non-ammonia
    , non-alcohol based glass 
    cleaner onto a clean, soft, lint-free cloth, and wipe the screen.
    To clean the case:
    1.Use a soft, dry cloth.
    2.If the case still not clean, apply a small amount of a non-ammonia
    , non-alcohol based, mild 
    non-abrasive detergent onto a clean, soft, lint-free cloth, then wipe the surface.
    Disclaimer
    • ViewSonic
    ® does not recommend the use of any ammonia or alcohol-based cleaners on the 
    LCD display screen or case. Some chemical cleaners have been reported to damage the 
    screen and/or case of the LCD display.
    • ViewSonic will not be liable for damage resulting from use of any ammonia or alcohol-
    based cleaners.
     
    						
    All ViewSonic manuals Comments (0)

    Related Manuals for ViewSonic VX1935wm Manual