ViewSonic Vt2756-l Manual

							22
Blocking Selected Input Source
To block the selected input source:
1. Press MENU to display the OSD main menu.
2. Press ◄ or ► to select PARENTAL menu, then press ENTER to 
enter the menu. 
3. Enter the password. 
4. Press ▲ or ▼ to select  Source Lock, then press ENTER to enter 
its submenu.
5. Press ▲ or ▼ to select the input source that you want to block.
6. Press ENTER to confirm. A 
icon indicates the selected input source has been blocked.
7. Press EXIT to exit the menu.
Resetting to Factory Default Settings
To reset all setting to the factory default settings:
1. Press MENU to display the OSD main menu.
2. Press ◄ or ► to select  OTHERS menu, then press ENTER to 
enter  
the menu. 
3. Press ▲ or ▼ to select  All Reset, then press ENTER to reset to 
the default settings.
TV ID Setting
To set ID number to TV for RS232 function:
1. Press MENU to display the OSD main menu.
2. Press ◄ or ► to select  OTHERS menu, then press ENTER to 
enter  
the menu. 
3. Press ▲ or ▼ to select  TV ID.
4. Press ◄ or ► to set the ID number (1~98).   
For details information, refer to the RS232 Protocol on page 
34~42.
5. Press EXIT to exit the menu.
SOURCE L OCKSOURCE LOCK
TV
AV
YPbPr
HDMI1
HDMI2
HDMI3
PC
:Retur n:MoveMENUMENU:On/O ffENTERENTER:Page
Page 1/2
PARENT AL CONTROLPARENT AL CONTROL
Lock  Parental Contro l
V-CHIP
C hange P assword
Keypad  Lock
S ource  Lock
System Lock
:Retur n:MoveMENUMENU:Go to Ne xt MenuENTERENTER
OTHERSOTHERS
Blue Back
No Signal  Power  Off
No Operation  Power  Off
U sage Monitor
A udio Only  Off
  TV  ID  3
A ll Reset
:Retur n:MoveMENUMENU
Execut e
:Change Setting
OTHERSOTHERS
Blue Back
No Signal  Power  Off
No Operation  Power  Off
U sage Monitor
A udio Only  Off
  TV  ID  3
A ll Reset
:Retur n:MoveMENUMENU
Execut e
:Change Setting
Using the TV Features  
						

							23
Customizing PC Display
Connect the PC and your TV using the VGA cable. See “Personal Computer” on page 10.
1. Press INPUT  to display the Source Select menu.
2. Press ▲ or ▼ to select PC, then press ENTER to confirm the 
setting.
3. Press MENU to display the OSD main menu.
4. Press ◄ or ► to select  PICTURE menu, then press ENTER to 
enter the menu. 
5. Press ▲ or ▼ to select  PC Settings, then press ENTER to enter 
its submenu.
6. Press ▲ or ▼ to select  Auto Adjust, Horizontal Position , 
Vertical Position , Clock, or Phase, and press ◄ or ► to adjust 
the setting.
7. Press EXIT to exit the menu.
PC SET TINGSPC SET TINGS
Au to Adjust  Execut e
Horizontal P osition
Ve rtical P osition 
Cloc k
P hase
R eset  Execut e
:Retur n:Move:Press to Ex ecuteMENUMENUENTERENTER
PICTUREPICTURE
Picture Settings 
Screen Size  Wide
PC Settings
Co lor  Temperature  Normal
B ack light  High
Ad vanced Pic ture Settings
:Return:Move:Go to Ne xt MenuMENUMENUENTERENTER
Using the TV Features  
						

							24
Using USB Function
Your TV is equipped with a USB connector that enables you to view photos or l\
isten to music stored 
on a USB storage device.
j USB only supports JPEG and MP3 files.
Multimedia support format
Multimedia 
CategoriesFile 
ExtensionDecoder
Notes
Music *.mp3MPEG1 Audio  LAYERIII 
 
(Not corresponding MP3 
Pro) Sampling Frequency [KHz] : 32 / 44.1 / 48
Bit Rate [kbit/s]: 32 / 40 / 48 / 56 / 64 / 80 / 
96 / 112 / 128 / 160 / 192 / 224 / 256 / 320 
/ VBR
Photo *.jpgBaseline Horizontal Max: less than 5000
Vertical Max: less than 5000
Horizontal Min: greater than 8
Vertical Min: greater than 8
1. Plug a USB device to the USB connector on the rear side of the TV.
2. Press INPUT  to display the Source Select menu.
3. Press ▲ or ▼ to select  USB, then press ENTER to confirm the setting. The USB menu appears 
on the screen.
Musi cMusic PhotoPhoto Media SettingMedia Setting
NowPlayingNowPlaying
4. Press ◄ or ► to select the menu item, then press  ENTER. 
5. Press EXIT to return to the previous screen.
Playing Music
1. Press ◄ or ► to select  Music, then press ENTER. 
If there are several folders, press ▲ or ▼ to select 
the desired folder, then press ENTER to view the 
subfolder content. 
2. Press ▲ or ▼ to select a song, then press  ENTER to 
play. An automatic playback begins from the selected 
song.
musicF older 0 File 10 PAGE 1/1
1.         Music001.MP3
2.         Music002.MP3
3.         Music003.MP3
4.         Music004.MP3
5.         Music005.MP3
6.         Music006.MP3
7.         Music007.MP3
8.         Music008.MP3
9        Music009.MP 3
10.         Music010.MP3
Using the TV Features  
						

							25
3. During the playback, do the following:
• To pause the playback, press ◄ or ► to select 
 
icon, then press ENTER. Press ◄ or ► to select 
 
icon, then press ENTER to resume. 
•  To skip to previous song, press ◄ or ► to select 
 icon, then press ENTER.
•  To skip to next song, press ◄ or ► to select 
 
icon, then press ENTER.
•  To stop the playback, press ◄ or ► to select 
 
icon, then press ENTER.
j You can directly view the playlist by selecting  NowPlaying, then press ENTER. 
Viewing Photos
1. Press ◄ or ► to select  Photo, then press ENTER. 
If there are several folders, press ▲ or ▼ to select the desired folder , then press ENTER to view 
the subfolder content. 
2. Press ▲ or ▼ to select a photo, then press  ENTER to view the photo in full screen.
•  Press EXIT to stop the slide show.
Customizing Slide Show Settings
1. Press ◄ or ► to select  Media Setting, then press 
ENTER. 
2. Press ▲ or ▼ to select the menu item, and press ◄  or ► to adjust the setting.
Menu item Description
Slideshow Interval Set the interval time between each slide displays (3 S / 5 S / 10 S / 30 S / 
1 Min / 30 Min).
Slideshow Effect Select the transition effect between each slide displays (Random / Off /   
Wipe Right / Wipe Left / Wipe Up / Wipe Down / Comb Side / Comb 
UpDown / Checker / Mosaic / Fade / Blind Right / Blind Left / Blind Up /\
 
Blind Down /   
Box In / Box Out / Slide in Right / Slide in Left / Slide in Up / Slide \
in 
Down).
Slideshow Repeat Enable/Disable the slide show repeatition (Off / On).
Slide Mode Set the slide mode option (Order / Random).
Background Music Enables/Disable background music during the slide show (On / Off).
Music Play Mode Set music play mode option (Order / Random / Play One).
Music Play Repeat Enable/Disable the music playback repeatition (Off / On).
Music Auto  Play Enable/Disable the automatic music playback (Off / On).
Slideshow Interval
Slideshow Effe ct
Slideshow Repeat
Slide Mode
Background Musi c
Music Pl ay Mode
Music Pl ay Repeat
Music  Auto Play 5 S
Ra
ndom
Of f
Order
On
Order
Of f
Of f
Name
Date
Size
Titl e
Ar tist
Albu m
Tr ack
Genr e
Time : Music001.MP3
: 2012/1/1 12:00:00
: 5013KB
: Music001
: Un
know
: Music
                         Year                 :2007
:P op
:03:33
No Jacket
00:09/03:33
Using the TV Features  
						

							26
Adjusting On-Screen Display (OSD) Settings
1. Press MENU to display the OSD main menu.
PICTURESOUNDCHANNELPARENT ALSETUPOTHERS
2. Press ◄ or ► to select the main menu, then press ENTER to enter the selected menu. 
3. Press ▲ or ▼ to select the menu item, then press ◄ or ►  to adjust or select the setting.
When selecting a menu item with a submenu (
► ►), press ► or  ENTER to enter its submenu.
(“
► ►” will only appear when the menu item is highlighted)
4. Press MENU to return to the previous menu or press  EXIT to exit the menu.
Picture Menu
Menu item Description
Picture 
Settings Apply a preset picture mode optimized for 
different viewing conditions (Standard / Movie / 
User /Power Saving / Dynamic).
j If 
Picture Settings is set to  User, you can 
adjust the following settings:
•  Brightness: Adjust the brightness setting.
•  Contrast: Adjust the difference between 
the light and dark levels in the picture.
•  Saturation: Adjust the color detail of 
images.
•  Hue: Adjust the picture hue.
•  Sharpness: Adjust the sharpness of the 
edges of elements in the picture.
Screen Size Select the aspect ratio of the display (Zoom / 
Normal / Wide / Cinema).
PC Settings 
(only available 
on VGA 
source) Adjust the PC display settings.
• 
Auto Adjust: Synchronize the display 
automatically.
•  Horizontal Position : Move the screen 
position horizontally.
•  Vertical Position : Move the screen position 
vertically.
•  Clock: Adjust delay time of clock in order to 
reduce the noise of picture.
•  Phase: Adjust delay time of phase in order to 
reduce the noise of picture.
•  Reset : Reset to the default settings.
Color 
Temperature Apply a preset color temperature setting 
(Normal / Warm / Cool).
PICTURE SET
TINGSPICTURE SETTINGS
Picture Mode  Power Sa ving
Brightness
Co ntrast
Satur ation
Hue
S harpness
:Retur n:MoveMENUMENU:Change Setting
The  Power Sa ving pic ture is qualified ENERGY ST AR 
PICTUREPICTURE
Picture Settings 
Screen Size  Wide
PC Settings
Co lor  Temperature  Normal
B ack light  High
Ad vanced Pic ture Settings
:Return:Move:Go to Ne xt MenuMENUMENUENTERENTER
PC SET TINGSPC SET TINGS
Au to Adjust  Execut e
Horizontal P osition
Ve rtical P osition 
Cloc k
P hase
R eset  Execut e
:Retur n:Move:Press to Ex ecuteMENUMENUENTERENTER
Using the TV Features  
						

							27
Menu itemDescription
Backlight Adjust the backlight that affects the overall 
brilliance of the picture (High / Medium / Low).
Advanced 
Picture 
Settings Set additional picture settings:
• 
Dynamic Contrast : Automatically  enhance 
the image for greater picture details.
•  Film Mode : Produce smoother motion picture 
when viewing movies from video players 
connected via HDMI.
•  Noise Reduction: Reduce the noise level.
•  MPEG Noise Reduction : Reduce the noise 
level when viewing movies.
HDMI Mode Allows to set the HDMI Mode to be: Video/PC.
•	Video:  Use when connected to Video 
sources (Blu-Ray, DVD, etc) for optimal 
video playback.
•	 PC: Use when connected to PC for 
optimal text.
Sound Menu
Menu item Description
Sound 
Settings Apply a preset audio option optimized for 
different sounding conditions (Standard / Soft / 
User / Dynamic).
j If 
Sound Settings  is set to User, you can 
adjust the following settings:
•  Bass : Adjust the bass level to your 
preference.
•  Treble: Adjust the treble level to your 
preference.
•  Balance: Adjust the sound balance 
between the left and right speakers.
Analog Sound Select the analog audio mode (Mono / SAP / 
Stereo).
* Only available for analog channels.
Digital Sound Select the digital audio mode.
* Only available for digital channels.
Digital Audio 
Output Select the type of digital audio output to an 
external audio system (Off / PCM / Raw).
Equalizer 
Settings Apply a preset equalizer setting (Off / Rock / 
Pop / Jazz).
ADV
ANCED PICTURE SET TINGSADVANCED PICTURE SET TINGS
Dynamic  Contrast  Off
F ilm Mode  Off
N oise Reduc tion  Medium
MPEG Noise Reduc tion Medium
HDMI Mode  PC
:Return:Move:Change SettingMENUMENU
SOUND SET TINGSSOUND SET TINGS
Sound Mode  Standar d
B ass
Tr eble
B alanc e
:Retur n:MoveMENUMENU:Change Setting
SOUNDSOUND
Sound Settings
A nalog Sound  Stereo
D igital Sound
D igital A udio Output  Off
E qualizer Settings  Off
:Retur n:MoveMENUMENU:Go to Ne xt MenuENTERENTER
Using the TV Features  
						

							28
Channel Menu (Only available on TV source)
Menu itemDescription
Channel List View the list of the available channels.
Favorite List View your favorite channel list.
Channel 
Settings Set the channel settings.
• 
Skip: Hide channel in the channel list.
•  Favorite: Set your favorite channel.
•  Label: Edit the channel name.
Signal Type Select the tuner mode type (Air / Cable).
* Only available for analog channels.
Auto Channel 
Search Scan the channel search automatically based 
on the selected tuner mode.
DTV Signal Display the detected signal strength of the 
current DTV channel.
* Only available for digital channels.
Parental Control Menu
Menu itemDescription
Lock Parental 
Control Enter password to access Lock Parental 
Control menu.The default is “0000”.
V-CHIP Set the channel settings.
• US V-Chip: Set which USA TV/movie rating 
to lock for viewing.
•  Canada V-Chip: Set which Canada TV/movie 
rating to lock for viewing.
•  Block UnRated Show: Block all unrated 
programs.
•  Downloadable Rating : Download updated 
rating data.
•  Clear Downloaded Data: Delete the 
downloaded rating data.
* Downloadable Rating  and Clear 
Downloaded Data options are only available 
for digital channels.
Change 
Password Change the new password.
Keypad Lock Select to lock the front panel keys operation.
Source Lock Select the input source that you want to block.
System Lock Enable/Disable the Lock Parental Control 
function.
CHANNELCHANNEL
Channel List
Fa vo rite List
C hannel Settings
S ignal  Type  Air
Au to Channel S earch
DT V Signal  0%
:Return:MoveMENUMENU
Execut e
:Go to Ne xt MenuENTERENTER
CHANNEL SET TINGSCHANNEL SET TINGS
C hannel  Skip  Favo rite  Label
A2
A3
A4
A5
A6
A7
:Retur nMENUMENU:Add/DeleteENTERENTER:Cursor
Page 1/7
V-CHIPV-CHIP
US  V-Chip
C anada  V-Chip
Block Un Rated Show
Do wnloadable  Rating
C lear Downloadable Data
:Retur n:MoveMENUMENU:Go to Ne xt MenuENTERENTER
CHANGE P ASSWORDCHANGE PASSWORD
Old PIN
N ew PIN
c onfir m
:Retur nMENUMENU:Enter passwor d0-90-9
SOURCE LOCKSOURCE LOCK
TV
AV
YPbPr
HDMI1
HDMI2
HDMI3
PC
:Retur n:MoveMENUMENU:On/O ffENTERENTER:Page
Page 1/2
Using the TV Features  
						

							29
Setup Menu
Menu itemDescription
Closed 
Caption Set Closed Caption (CC) settings.
• 
Caption Display: Enable/Disable the caption 
display.
•  Analog Caption Type: Set the analog CC 
display type.
•  Digital Caption Type: Set the basic digital 
CC display type.
•  Digital CC Preset: Select to use the default 
or customized digital CC display style. 
•  Digital CC Style: Customize the size, font, 
opacity, text color, background opacity, or 
background color for digital CC display.
* Digital CC Style is only available if  Digital 
CC Preset  is set to Custom.
Menu 
Language Select the on-screen menu language.
Clock Set the time settings.
• Time Zone: Select a location to apply the 
time zone.
•  Auto Clock: Set the time automatically from 
a digital channel signal.
•  Setup Time: Set the current date and time.
•  Day of Week: Display the day of the week.
•  Daylight Saving Time: Set to turn on/off 
daylight saving. 
•  Time Format: Select the time format.
* Daylight Saving Time is only available if 
Auto Clock is enabled.
OSD 
Transparency Set the OSD transparency level.
OSD Timer Set the duration OSD menu stays visible on 
the screen.SETUPSETUP
Closed Caption
M enu Language  English
Cloc k
OSD  Transparenc y  Off
OSD  Timer  20 S
:Retur n:MoveMENUMENU:Go to Ne xt MenuENTERENTER
CL OSED CAPTIONCLOSED CAPTION
Caption Display  Off
A nalog Caption  Type  CC1
D igital Caption  Type  Service1
D igital  CC Pr eset  Default
D igital  CC Style
:Retur n:MoveMENUMENU:On/O ff
CLOCKCLOCK
Time Z one  Pacific
Au to Cloc k
S etup  Time  01-01-2000 05:31:09 Am
Day of  Week  Sat
Daylight Sa ving Time
T ime  Format  12H
:Return:MoveMENUMENU:Change Setting
Using the TV Features  
						

							30
Others Menu
Menu itemDescription
Blue Back Select to enable the blue background in case 
of no signal.
No Signal 
Power Off Select to set the TV to automatically turn off in 
case of no signal for 10 minutes.
No Operation 
Power Off Select to set the TV to automatically turn off if 
it is left idle for 10 minutes.
Usage Monitor Select to calculate the overall monitor usage.
Audio Only Output audio from the TV speakers but turn off 
the TV display (Off / On).
TV ID Set the TV ID for RS232 parameter.
All Reset Select to restore the factory default settings.OTHERSOTHERS
Blue Back
No Signal  Power  Off
No Operation  Power  Off
U sage Monitor
A udio Only  Off
  TV  ID  3
A ll Reset
:Retur n:MoveMENUMENU
Execut e
:On/O ffENTERENTER
Hospitality Menu
1.  Press  MENU and 9, 9, 3 button on the remote controller to display the Hospitality menu.
2.   Press 
 or  to select the menu item, then press  or  to adjust or select the setting. When 
selecting a menu item with a submenu ( > > ), press 
 or ENTER to enter its submenu.
3. Press MENU to return to the previous menu or press  EXIT to exit the menu.
Hospitality Menu
EEPROM Init Save Config To USB Load Config From USB
Hospitality
Hospitality Function DO
OffMenu item Description
EEPROM Init Clean up the setting to its initial value.
Save Config To 
USB Save the hospitality configuration into USB 
drive.
Load Config From 
USB Load the hospitality configuration from USB 
drive.
Hospitality Turn on or off the Hospitality function.
Hospitality 
Function Enter the hospitality sub-menu.
Hospitality Menu
Re mote Customer Code
Menu Ke y
Re mote Contro l
VOL Def .
VOL Max
AV YPbPr
HDMI1
HDMI2
HDMI3
PC USB
Po wer Inpu t Enable
30
100
Enable Enable
Enable
Enable
Enable
Enable Enable
AV
EnableMenu item
Description
Remote Customer 
Code Select the specific remote ID (0, 1, or 2).
Menu Key Enable or disable the MENU key.
Remote Control Enable, disable remote or set as IR pass 
through
VOL Def. Default volume for each power on.
VOL Max Maximum available volume
AV
YPbPr
HDMI1/2/3
PC
USB Enable or disable the input source.
Power Input Default input source for each power on.
Using the TV Features  
						

							31
Troubleshooting
Please contact ViewSonic service team directly if you have questions, service needs, or \
require 
technical assistance related on the use of your television.
Contact ViewSonic Service Team at:
http://www.ViewSonic.com
Or call our service team:
United States 1-800-688-6688
Canada 1-866-463-4775
Europe +44 (0) 207 382 8250
ProblemPossible Solution
No power • Make sure the AC power cord is properly connected to the wall 
outlet.
•  Plug another electrical device (like a radio) to the power outlet to 
verify that the outlet is supplying the proper voltage.
No picture • The TV station may be experiencing problems. Try another 
channel.
•  The Cable TV signal may be scrambled or encoded. Please 
contact your local cable operator.
•  Make sure that the cable connection to other components are 
properly installed.
•  Make sure that setup has been done correctly after connections.
•  Make sure the correct input is selected and the input signal is 
compatible.
Strange color, light color,  
or color misalignment • 
Ensure that the video cable is securely connected.
•  The picture may appear dim in a brightly lit room.
•  Adjust the display settings.
•  Check the input signal setting.
No sound • Check your audio connections to other components are properly 
installed.
•  The MUTE button may have been pressed, try pressing this 
button again.
•  Check your audio settings, your TV audio may be set to 
minimum.
•  Press VOL + on the remote control.
Other Information