ViewSonic Vt2756-l Manual

2
Installing the LCD TV
Installing the Stand
Figure 1Figure 2Figure 3
Pr/Cr
Pb/Cb
Y
VIDEO
IN
PC/VGA IN
TV
IN PC/VGA
AUDIO IN
REMOTE
CONTROL OUT AUDIO IN
R LHDMI 1 HDMI 2HDMI 3SPDIF
OUT RS232
EARPHONE
OUT
USB
1. Carefully place the TV screen side down on a cushioned surface to protect the screen from 
damage. (see Figure 1)
2. Attach the foot stand and secure it with the included screws. Please fas\
ten with a cross screw  driver. (see Figure 2)
3. Stand the TV up. (see Figure 3)
Disconnecting the Stand...

3
Mounting ViewSonic LCD TV to the wall
The LCD TV can be used in a free standing position or wall-mounted. Before installing the product to 
the wall, please consider the following guidelines:• Read the Important Safety Instructions, at the start of this manual. 
•  Do not install in a moist or wet environment. This equipment is intended for  indoor use.
•  Do not install near heat source, or strong magnetic fields.
•  Use only ViewSonic approved  wall-mounting brackets to support the LCD TV weight.
•...

4
Wall Mount Kit Specifications (VESA)
When attaching to other building materials, please contact your nearest \
dealer.
Pr/Cr
Pb/Cb
Y
VIDEO
IN
PC/VGA IN
TV
IN PC/VGA
AUDIO IN
REMOTE
CONTROL OUT AUDIO IN
R LHDMI 1 HDMI 2HDMI 3SPDIF
OUT RS232
EARPHONE
OUT
USB
A
B DC
Product Family
inchVESA Spec. (A x B) Standard Screw  
(C x D) Quantity
LCD TV 27100 x 100 mm M4 x L124
LCD TV 24100 x 100 mm M4 x L124
•  ViewSonic provides the standard dimensions for wall mount kits as shown i\
n the table above.
•  To find...

5
Front View of the Product
165432
ItemIconDescription
1 LED Indicator
Blue indicates power on. Red indicates standby mode.
Remote Control 
Receiver Receive IR signals from the remote control.
2 Volume VOL -
Decrease the volume.
Move to the left or adjust the setting on the OSD menu.
VOL + Increase the volume.
Move to the right or adjust the setting on the OSD 
menu.
3 Channel Select CH -
Return to the previous channel.
CH  + Advance to the next channel.
4 Menu MENUTurn the on-screen display (OSD) menu...

6
Rear View of the Product
Pr
Pb
Y
VIDEO
 IN
PC/VGA INTV
IN PC/VGA
AUDIO IN
REMOTE
CONTROL OUT AUDIO IN
R L
HDMI 1 HDMI 2HDMI 3SPDIF
OUT RS232
USBEARPHONE
OUT
8765234
1
13
12
10
9
11
Pr/Cr
Pb/Cb
Y
VIDEO
IN
PC/VGA IN
TV
IN PC/VGA
AUDIO
IN
REMOTE
CONTROL
OUT AUDIO IN
R L
HDMI 1 HDMI 2HDMI 3SPDIF
OUT RS232
EARPHONE
OUT
USB
Item
Description
1 Power (AC input) Connect to the AC input power source.
2 Remote Control output Connect to an IR emitter. This will enable the remote control of 
external equipment.
3...

7
Connecting the LCD TV
Cable System or VHF/UHF Antenna System
Enjoy the high-definition and standard-definition digital programming along with standard-definition 
analog programming.
☼ 
• This TV is capable of receiving unscrambled digital programming for both cabl\
e and external VHF/
UHF antenna. 
•  We strongly recommend that you connect the antenna/cable input using a 75-ohm coaxial cable 
(not supplied) to ensure the best picture quality. 
Cable or VHF/UHF
75-ohm coaxial cable Rear side of the TV...

8
DVI Connection
HDMI 1
HDMI 2HDMI 3SPDIF
OUT RS232
Pr
Pb
Y
VIDEO
 IN
PC/VGA IN
PC/VGA
AUDIO IN AUDIO IN
R L
COMPONENT
VIDEO OUT
Pr YVIDEO DVI-HDTV OUT
HDMI OUT OUTIN
AUDIOL
R
Pb
LINE OUT
Audio cable
DVI-to-HDMI cable
Rear side of the TV
DVI-to-HDMI cable
CATV / Satellite 
antenna cableDVI-to-HDMI adapterAudio cable
HD cable box / 
 
HD satellite box
☼ 
•  For DVI connection, connect the HDMI jack (with DVI-to-HDMI cable or adapter), and connect the 
audio jack to the AUDIO IN jacks of PC Audio input....

9
YPbPr or Component Connection
Pr
Pb
Y
VIDEO
 IN
PC/VGA IN
PC/VGA
AUDIO IN AUDIO IN
R L
COMPONENT
VIDEO OUT
Pr YVIDEO DVI-HDTV OUT
HDMI OUT OUTIN
AUDIOL
R
Pb
LINE OUT
Audio cable
Component 
 
cable
Rear side of the TV
Component cable
CATV / Satellite 
antenna cableAudio cable HD cable box / 
 
HD satellite box
☼ 
•  YPbPr provides better quality than the AV connection.
AV Connection
COMPONENT VIDEO OUT
Pr YVIDEO DVI-HDTV OUT
HDMI OUT OUTIN
AUDIOL
R
Pb
LINE OUT
Pr
Pb
Y
VIDEO
 IN
PC/VGA IN
PC/VGA
AUDIO IN...

10
Programming your Cable or Satellite Box remote
Refer to the user manual from your service provider to determine the set\
ting.
If it requires:
• 3 digits, please try “566”, “565”, “556”, or “688”\
. It usually works with DISHNetwork.
•  4 digits, please try “0054”. It usually works with Cox.
•  5-digits, please try “11454”, “11054”, or “10690”. It usually works with DIRECTV.
Personal Computer
Use the LCD TV as the monitor of your computer.
HDMI 1 HDMI 2HDMI 3SPDIF
OUT RS232
Pr
Pb
Y
VIDEO
 IN
PC/VGA...

11
Remote Control and TV Controls
Inserting Remote Control Batteries
1. Remove the battery cover by pulling then lifting the knob on the cove\
r.
2. Insert the batteries, corresponding to the (+) and (-) markings on the battery compartment.
3. Reattach the battery cover.
 CAUTION
•  Only use the specified AAA batteries.
•  Do not mix new and old batteries. This may result in creaking or leakage, which may pose a risk of 
fire or lead to personal injury.
•  Insert batteries according to (+) and (-)...