ViewSonic VG932m Manual

ViewSonic
®
VG932m
LCD Display
Model No. : VS13642
IMPORTANT:  Please read this User Guide to obtain important 
information on installing and using your product in a safe manner, as 
well as registering your product for future service.  Warranty information 
contained in this User Guide will describe your limited coverage from 
ViewSonic Corporation, which is also found on our web site at http://
www.viewsonic.com in English, or in specific languages using the 
Regional selection box in the upper right...

ViewSonicVG932m
Contents
Compliance Information.............................................................................. 1
Important Safety Instructions ...................................................................... 2
Declaration of RoHS Compliance ............................................................... 3
Copyright Information ................................................................................. 4
Product Registration...

ViewSonicVG932m 1
Compliance Information 
For U.S.A.
This device complies with part 15 of FCC Rules. Operation is subject to the following two 
conditions: (1) this device may not cause harmful interference, and (2) this device must accept 
any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital 
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide...

ViewSonicVG932m 2
Important Safety Instructions
1.Read these instructions completely before using the equipment.
2.Keep these instructions in a safe place.
3.Heed all warnings.
4.Follow all instructions.
5.Do not use this equipment near water. Warning: To reduce the risk of fire or electric shock, 
do not expose this apparatus to rain or moisture.
6.Clean with a soft, dry cloth. If further cleaning is required, see “Cleaning the Display” in 
this guide for further instructions.
7.Do not block any...

ViewSonicVG932m 3
Declaration of RoHS Compliance
This product has been designed and manufactured in compliance with Directive 2002/95/EC of
the European Parliament and the Council on restriction of the use of certain hazardous
substances in electrical and electronic equipment (RoHS Directive) and is deemed to comply
with the maximum concentration values issued by the European Technical Adaptation
Committee (TAC) as shown below: 
Certain components of products as stated above are exempted under the Annex...

ViewSonicVG932m 4
Copyright Information
Copyright © ViewSonic® Corporation, 2011. All rights reserved.
Macintosh and Power Macintosh are registered trademarks of Apple Inc.
Microsoft, Windows, Windows NT, and the Windows logo are registered trademarks of
Microsoft Corporation in the United States and other countries.
ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered
trademarks of ViewSonic Corporation.
VESA is a registered trademark of the Video Electronics Standards...

ViewSonicVG932m 5
Getting Started
Congratulations on your purchase of a ViewSonic® LCD display.
Important! Save the original box and all packing material for future shipping needs.
NOTE: The word “Windows” in this user guide refers to the following Microsoft operating
systems: Windows XP, Windows Vista, and Windows 7.
Package Contents
Your LCD display package includes:
•LCD display
• Power cord
• Audio cable
• D-Sub cable 
• DVI cable
• ViewSonic Wizard CD-ROM
• Quick Start Guide
NOTE: The CD includes...

ViewSonicVG932m 6
Quick Installation
1. Connect power cord (and AC/DC 
adapter if required)
2. Connect video cable
• Make sure both the LCD display and 
computer are turned OFF
• Remove rear panel covers if necessary
• Connect the video cable from the LCD 
display to the computer
Macintosh users: Models older than G3 
require a Macintosh adapter. Attach the 
adapter to the computer and plug the video
cable into the adapter.
To order a ViewSonic
® Macintosh adapter, 
contact ViewSonic Customer Support.
3....

ViewSonicVG932m 7
Wall Mounting (Optional) For use only with UL Listed Wall Mount Bracket
To obtain a wall-mounting kit or height adjustment base, contact ViewSonic
® or your local
dealer. Refer to the instructions that come with the base mounting kit. To convert your LCD
display from a desk-mounted to a wall-mounted display, do the following:
Step 1.Verify that the power button is turned Off, then disconnect the power cord.
Step 2.Lay the LCD display face down on a towel or blanket.
Step 3.Remove the...

ViewSonicVG932m 8
To Raise and Lower the display
You can easily raise and lower the display panel (the head) manually. As you face the front of
the display, take hold of each side of the head and pull up or down. The panel should move
easily.