ViewSonic VA926 Manual

							
ViewSonic
®
VA926
LCD Display
Model No. : VS11886
IMPORTANT:  Please read this User Guide to obtain important 
information on installing and using your product in a safe manner, as 
well as registering your product for future service.  Warranty information 
contained in this User Guide will describe your limited coverage from ViewSonic Corporation, which is also found on our web site at http:// www.viewsonic.com in English, or in specific languages using the 
Regional selection box in the upper right corner of our website.  
“Antes de operar su equipo lea cu idadosamente las instrucciones en 
este manual”
 
						

							
ViewSonicVA926
Contents
TCO Information .......... ................................. ................................. .............. i
Compliance Information........... ................................................................... 1
Important Safety Instructions ... ................................................................... 2
Declaration of RoHS Complianc e .................................................. ............. 3
Copyright Information ........... ...................................................................... 4
Product Registration ............. ...................................................................... 4
Getting Started
Package Contents ............ ................................................. ......................... 5
Precautions ............... ................................................................................. 5
Quick Installation ....... ................................................................................. 6
Wall Mounting (Optional) ......... ................................................................... 7
Using the LCD Display
Setting the Timing Mode.......... ................................................................... 8
OSD and Power Lock Settings .... .................................................. ............. 8
Dynamic Contrast ................. ...................................................................... 8
Adjusting the Screen Image ...... ................................................................. 9
Main Menu Controls ............. ......................................................... ........... 11
Other Information
Specifications ............ ................................................. .............................. 14
Troubleshooting .................... ......................................................... ........... 15
Customer Support ......... ........................................................................... 16
Cleaning the LCD Display ......... ................................. .............................. 17
Limited Warranty ......... ................................. ................................. ........... 18
Mexico Limited Warranty ...... ......................................................... ........... 20
 
						

							
ViewSonicVA926 i
TCO Information
Congratulations!
The display you have just purchas ed carries the TCO’03 Displays
label. This means that your display is designed, manufactured and
tested according to some of the  strictest quality and environmental
requirements in the world. This  makes for a high performance
product, designed with the user in  focus that also minimizes the
impact on our natural environment. 
Some of the features of the TCO’03 Display requirements:
Ergonomics 
Good visual ergonomics and image quality in or der to improve the working environment for
the user and to reduce si ght and strain problems. Important pa rameters are luminance, contrast,
resolution, reflectance, colour  rendition and image stability. 
Energy  • Energy-saving mode after a certa in time - beneficial both for the user and the environment 
• Electrical safety 
Emissions • Electromagnetic fields
• Noise emissions 
Ecology • The product must be prepared  for recycling and the manufacturer must have a certified
environmental management syst em such as EMAS or ISO 14000
• Restrictions on
a. chlorinated and brominated  flame retardants and polymers
b. heavy metals such as cadmium, mercury and lead.  
The requirements included in this label have  been developed by TCO Development in co-
operation with scientists, experts, users as well  as manufacturers all over the world. Since the
end of the 1980s TCO has been i nvolved in influencing the development of IT equipment in a
more user-friendly direction. Our labelling sy stem started with displays in 1992 and is now
requested by users and IT-manuf acturers all over the world.
For more information, please visit
www.tcodevelopment.com
 
						

							
ViewSonicVA926 1
Compliance Information 
For U.S.A.
This device complies with part 15 of FCC Rule s. Operation is subject to the following two 
conditions: (1) this device may not  cause harmful interference, and (2) this device must accept 
any interference received, in cluding interference that may cause undesired operation.
This equipment has been tested and found to  comply with the limits for a Class B digital 
device, pursuant to part 15 of the FCC Rules.  These limits are designed to provide reasonable 
protection against harmful interfe rence in a residential installation. This equipment generates, 
uses, and can radiate radio frequency energy, and  if not installed and used in accordance with 
the instructions, may cause harmful interferen ce to radio communications. However, there is 
no guarantee that interference will  not occur in a particular installation. If this equipment does 
cause harmful interference to radio or televisi on reception, which can be determined by turning 
the equipment off and on, the user is encouraged  to try to correct the interference by one or 
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between  the equipment and receiver.
• Connect the equipment into an out let on a circuit different from that to which the receiver is 
connected.
• Consult the dealer or an experien ced radio/TV technician for help.
Wa r n i n g :  You are cautioned that changes or modi fications not expressly approved by the 
party responsible for compliance could void  your authority to operate the equipment.
For Canada
This Class B digital apparatus co mplies with Canadian ICES-003.
Cet appareil numérique de  la classe B est conforme à la norme NMB-003 du Canada.
CE Conformity for  European Countries
The device complies with the EMC Di rective 2004/108/EC and Low Voltage 
Directive 2006/95/EC.
Following information is  only for EU-member states:
The mark shown to the right is in comp liance with the Waste Electrical and 
Electronic Equipment Dir ective 2002/96/EC (WEEE).
The mark indicates the requirement NOT  to dispose the equipment as unsorted 
municipal waste, but use the return and  collection systems according to local law.
 
						

							
ViewSonicVA926 2
Important Safety Instructions
1.Read these instructions complete ly before using the equipment.
2. Keep these instructions in a safe place.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this equipment near water. Warning:  To reduce the risk of fire or electric shock, 
do not expose this apparatus to rain or moisture.
6. Clean with a soft, dry cloth. If further cleani ng is required, see “Cleaning the Display” in 
this guide for further instructions.
7. Do not block any ventilation openings. Inst all the equipment in accordance with the 
manufacturer’s instructions.
8. Do not install near any heat sources such as  radiators, heat registers, stoves, or other 
devices (including amplifiers) that produce heat.
9. Do not attempt to circumvent the safety  provisions of the polarized or grounding-type 
plug. A polarized plug has two blades with one  wider than the other. A grounding type 
plug has two blades and a third grounding pr ong. The wide blade and the third prong are 
provided for your safety. If th e plug does not fit into your outle t, consult an electrician for 
replacement of the outlet.
10. Protect the power cord from being tread upon or  pinched, particularly at the plug, and the 
point where if emerges from the equipment. Be  sure that the power outlet is located near 
the equipment so that it is easily accessible.
11 . Only use attachments/accessories  specified by the manufacturer.
12. Use only with the cart, stand, tripod,  bracket, or table specified by the 
manufacturer, or sold with  the equipment. When a cart is used, use caution 
when moving the cart/equipment combin ation to avoid injury from tipping 
over. 
13. Unplug this equipment when it will  be unused for long periods of time.
14. Refer all servicing to qualifi ed service personnel. Service is required when the unit has
been damaged in any way, such as: if the pow er-supply cord or plug is damaged, if liquid
is spilled onto or objects fall in to the unit, if the unit is exposed to rain or moisture, or if
the unit does not operate normally or has been dropped.
 
						

							
ViewSonicVA926 3
Declaration of RoHS Compliance
This product has been designed  and manufactured in compliance with Directive 2002/95/EC of
the European Parliament and the Council on re striction of the use of certain hazardous
substances in electrical and  electronic equipment (RoHS Direc tive) and is deemed to comply
with the maximum concentration values is sued by the European Technical Adaptation
Committee (TAC) as shown below: 
Certain components of products  as stated above are exempted under the Annex of the RoHS
Directives as noted below:
Examples of exempt ed components are:
1. Mercury in compact fluorescent lamps not exceed ing 5 mg per lamp and in other lamps not 
specifically mentioned in th e Annex of RoHS Directive.
2. Lead in glass of cathode ray tu bes, electronic components, fluor escent tubes, and electronic 
ceramic parts (e.g. piezoelectronic devices).
3. Lead in high temperature type solders (i.e. l ead-based alloys containing 85% by weight or 
more lead).
4. Lead as an allotting element in steel cont aining up to 0.35% lead by weight, aluminium 
containing up to 0.4% lead by we ight and as a cooper alloy containing up to 4% lead by 
weight.
Substance Proposed Maximum Concentration Actual Concentration
Lead (Pb) 0.1% < 0.1%
Mercury (Hg) 0.1% < 0.1%
Cadmium (Cd) 0.01% < 0.01%
Hexavalent Chromium (Cr
6+) 0.1% < 0.1%
Polybrominated biphen yls (PBB) 0.1% < 0.1%
Polybrominated diphenyl  ethers (PBDE) 0.1% < 0.1%
 
						

							
ViewSonicVA926 4
Copyright Information
Copyright © ViewSonic® Corporation, 2010. All rights reserved.
Macintosh and Power Macintosh are re gistered trademarks of Apple Inc.
Microsoft, Windows, Windows NT, and the Wi ndows logo are registered trademarks of
Microsoft Corporation in the Un ited States and other countries.
ViewSonic, the three birds logo, OnView,  ViewMatch, and ViewMeter are registered
trademarks of ViewSonic Corporation.
VESA is a registered trademar k of the Video Electronics Standards Association. DPMS and
DDC are trademarks of VESA.
Disclaimer: ViewSonic Corporati on shall not be liable for technical or editorial errors or
omissions contained he rein; nor for incidental or c onsequential damages resulting from
furnishing this material, or the pe rformance or use of this product.
In the interest of continuing product improveme nt, ViewSonic Corporation reserves the right
to change product specifications without notic e. Information in this document may change
without notice.
No part of this document may  be copied, reproduced, or transmitted by any means, for any
purpose without prior wr itten permission from ViewSonic Corporation.
Product Registration
To meet your future needs,  and to receive any additional pr oduct information as it becomes
available, please register yo ur product on the Internet at:  www.viewsonic.com. The ViewSonic
Wizard CD-ROM also provides an opportunity fo r you to print the registration form, which
you may mail or fax to ViewSonic.
Product disposal at  end of product life
The lamp in this produc contains  mercury. Please dispose of in accordance with local, state or 
federal laws.
ViewSonic is concerned about th e preservation of our environment. Please dispose of this 
product properly at the end of its  useful life. For the recycling information, please refer to our 
website:
1. USA: www.viewsonic.com/comp any/green/recycle-program/
2. Europe: www.viewsoniceurope.com/ uk/support/recycling-information/
3. Taiwan: recycle.epa.gov.tw
For Your Records
Product Name:
Model Number:
Document Number:
Serial Number:
Purchase Date:VA926
ViewSonic LCD Display
VS11886
VA926-1_UG_ENG Rev. 1C 04-27-10
_________________________________
_________________________________
 
						

							
ViewSonicVA926 5
Getting Started
Congratulations on your pur chase of a ViewSonic® LCD display.
Important!  Save the original box and all packing  material for future shipping needs.
NOTE:  The word “Windows” in this user guide re fers to the following Microsoft operating
systems: Windows ‘95, Windows NT , Windows ‘98, Windows 2000, Windows Me
(Millennium), Windows XP, Windows Vista, and Windows 7.
Package Contents
Your LCD display package includes:
•LCD display
• Power cord
• D-Sub cable
• ViewSonic Wizard CD-ROM
• Quick Start Guide
NOTE:  The CD includes the User Guide PDF fi les and INF/ICM display optimization files.
The INF file ensures compatibility with Win dows operating systems, and the ICM file (Image
Color Matching) ensures accura te on-screen colors. ViewSonic recommends that you install
both the INF and ICM files.
Precautions
• Sit at least 18” from the LCD display.
• Avoid touching the screen.  Skin oils are
difficult to remove.
• Never remove the rear cover.  This LCD
display contains high- voltage parts. You
may be seriously injured if you touch
them.
• Avoid exposing the LCD display to direct sunlight or another he at source. Orient the
LCD display away from  direct sunlight to
reduce glare.
• Always handle the LCD display with care when moving it. • Place the LCD display 
in a well ventilated
area. Do not place anything on the LCD
display that prevents heat dissipation.
• Ensure the area around the LCD display i
s
clean and free of moisture.
• Do not place heavy objects on the LC
D
display, video cable, or power cord.
• If smoke, an abnorma l noise, or a strang
e
odor is present, immediately switch the
LCD display off and call your dealer or
ViewSonic. It is dangerous to continue
using the LCD display.
• Do not rub or apply pressure to the LC
D
panel, as it may permanently damage the
screen.
 
						

							
ViewSonicVA926 6
Quick Installation
1. Connect power cord (and AC/DC 
adapter if required)
2. Connect video cable • Make sure both the LCD display and  computer are turned OFF
• Remove rear panel  covers if necessary
• Connect the video cable from the LCD  display to the computer
Macintosh users:  Models older than G3 
require a Macintosh adapter. Attach the 
adapter to the computer and plug the video
cable into the adapter.
To order a ViewSonic
® Macintosh adapter, 
contact ViewSonic Customer Support.
3. Turn ON LCD display and computer Turn ON the LCD display, then turn ON 
the computer. This sequence (LCD display 
before computer) is important.
NOTE:  Windows users may receive a 
message asking them to install the INF 
file. This is on the CD.
4. Insert the ViewSonic Wizard CD into  the computer’s CD drive.
Follow the on-screen instructions. If your 
computer does not have  a CD-ROM drive, 
please refer to Customer Support page. • Wait for the CD-ROM to auto-start.
NOTE:  If the CD-ROM does not auto-
start: double-click on  the CD-ROM icon in 
the Windows Explorer, then double-click 
on  viewsonic.exe .
• Follow the on-screen instructions.
5. Windows users: Set the timing mode  (resolution and refresh rate)
Example:  1280 x 1024 @ 60 Hz.
For instructions on changing the resolution 
and refresh rate, see the graphics card’s 
user guide.
Installation is complete. Enjoy your new 
ViewSonic LCD display.
To be best prepared for any future 
customer service needs: print this user 
guide and write the serial number in “For 
Your Records” on page 4. (See back of 
LCD display.)
You can register your product online at the 
ViewSonic website for your region. See 
the Customer Support table in this guide.
The ViewSonic Wizard CD-ROM also 
provides an opportunity for you to print 
the registration form which you may mail 
or fax to ViewSonic.
Power Cord
AC Outlet
(Wall Socket)
Computer Power Cord
AC INDVI
D-Sub
 
						

							
ViewSonicVA926 7
Wall Mounting (Optional) For use only with UL Li sted Wall Mount Bracket
To obtain a wall-mounting ki t or height adjustment base, contact ViewSonic
® or your local
dealer. Refer to the instructions  that come with the base mounting kit. To convert your LCD
display from a desk-mounted to a wall -mounted display, do the following:
Step 1. Verify that the power button is turned  Off, then disconnect the power cord.
Step 2. Lay the LCD display face  down on a towel or blanket.
Step 3. Remove the plastic cover from  the back of the LCD display.
Step 4. Remove the four screws  attaching the base. 
Step 5. Remove the rubber plugs from insi de the four VESA screw holes. 
Step 6. Attach the mounting bracket  from the VESA compatible wall mounting kit (100 mm 
x 100 mm distance), using  screws of correct length.
Step 7. Attach the LCD display to th e wall, following the instructions in the wall-mounting 
kit.
Step 5-6. Four 
VESA screw holes
Step 3. Plastic cover
Step 4. Four screws 
attaching the base