ViewSonic V37 Pocket Pc Instructions Manual

1/
			
	

			

 &!
The following programs are permanently installed in your V37:
You can also install the following programs from the V37 Companion CD:
!3.

&!
Infrared
ReceiverOn the Start menu, tap Programs and then tap the 
Infrared Receive icon. Infrared Receive establishes the 
connection between your V37 and the IR device.
Terminal 
ServicesOn the Start menu, tap Programs and then tap the 
Terminal Services icon. Terminal Services allows...

		
	

			
10

#$%
This chapter tells you about Microsoft Pocket Internet Explorer, Mobile Favorites 
Folder and AvantGo Channels.
,

#$%
Use Microsoft Pocket Internet Explorer to view Web pages by doing the 
following:
• During synchronization with your PC, download your favorite links and 
mobile favorites that are stored in the Mobile Favorites subfolder in Internet 
Explorer on the PC.
To start Pocket Internet Explorer:
•On the Start...

11
			
	

			


.

(


&
)Ta p  t h e  Favorites button to display your list of favorites.
*In the list, tap the page you want to view.
You will see the page that was downloaded the last time you synchronized with 
your PC. If the page is not on your V37, it will be dimmed in the Favorites list. 
You will need to synchronize with your PC again to download the page to your 
V37, or connect to the Internet to view the page.
.

&#
To connect...

		
	

		
1

(
:

During synchronization, the list of favorite links in the Mobile Favorites folder on 
your PC is synchronized with Pocket Internet Explorer on your V37. Both 
computers are updated with changes made to either list each time you 
synchronize. Unless you mark the favorite link as a mobile favorite, only the 
link (and not the page) will be downloaded to your V37, and you must connect 
to your ISP or network to view the content. For more information on...

18
			
	

			

• Use ActiveSync settings to turn off pictures and sounds for the Mobile 
Favorites information type or to stop some mobile favorites from being 
downloaded to your V37. For more information, see ActiveSync Help.
• Limit the number of downloaded linked pages. In Internet Explorer on the 
PC, right-click the mobile favorite you want to change, and then click 
Properties. On the Download tab, specify 0 or 1 for the number of linked 
pages you want to download.
,...

		
	

			
19

8


This chapter explains how to connect your V37 to the Internet or to a network 
using a wireless connection. In addition, the chapter explains how to connect to 
other mobile devices or your PC using an infrared (IR) connection.


7.&#
You can connect to a wireless network at work or at home by installing an SDIO  
802.11B (WiFi) network card (purchased separately) into the V37’s SDIO slot. 
Once connected to a...



		
	

			
)

9
&



This chapter gives solutions to common V37 problems you may encounter when 
using the device. It also provides guidelines on taking care of your V37.
NOTE: If you encounter a problem you cannot solve, contact your reseller or 
ViewSonic Customer Support. See the “Customer Support” section at the end of 
this chapter.



CAUTION: Resetting will cause unsaved data to be lost.
Resetting your V37 is similar to restarting...

*
			
	

			

*Unscrew the cap at the top of the stylus. Use the pointed tip of the cap to 
press the reset button on the side of your V37.


(6	
In some cases, you may need to restore your V37 to the factory default settings 
by clearing the memory (RAM) from your V37. For example, you should clear 
the memory:
• When your V37 does not respond after being reset.
• When you forget your password.
Clearing the memory means all data you have entered in RAM,...

		
	

		


(.&

&!!	!2
)Disconnect all cables, including the AC adapter, from your V37.
*Unscrew the cap at the top of the stylus. Use the pointed tip of the cap to 
push the battery switch to the OFF (up) position.
Wait for three (3) minutes then push the battery switch to the ON (down) 
position.
/The Notification indicator will flash red for approximately 30 seconds, and 
then your V37 will automatically turn on and display the Welcome...