ViewSonic Projector Pro8500 User Manual
Here you can view all the pages of manual ViewSonic Projector Pro8500 User Manual. The ViewSonic manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 31
ViewSonic Pro8500 29 Black, Red, Green, Blue, Cyan, Yellow, Magenta, White Message Input Password Password Delete Green Mode DC 12V Quick Power On Quick Cooling Start up ScreenViewSonic, User Screen Capture Screen Capture Delete -5 - +5 On, Off Off, CC1, CC2, CC3, CC4, T1, T2On, Off On, Off On, Off On, Off Others On, Off Function*3 Setting Filter Mode*2 High Altitude OSD Transparency Top-Left, Bottom-Left, Top-Right, Bottom-Right Front-Table, Front-Ceiling, Rear-Table, Rear-Ceiling 0 - 60 0, 10, 20,...
Page 32
ViewSonic Pro8500 30 Information Factory DefaultLamp Hours Lamp Hours ResetFilter Hours*2 Filter Hours Reset*2 NetWorkWired LANStatusDisconnect, Connect On, Off DNS Apply Status ApplySSID SSID Display Connection ModeDisconnect, Connect On, Off AP, Infrastructure On, Off Wireless LAN Network Restart Yes, No MAC AddressInput SourceComputer 1, Computer 2, Component, Composite, S-Video, HDMI, USB 1, USB 2 Default Gateway *1 Adjustable range and default setting vary depending on signal type. *2 This...
Page 33
ViewSonic Pro8500 31 How to operate 1. Press MENU on the projector or Menu on the remote control to open the OSD menu. 2. When OSD is displayed, use / to select any feature in the main menu. 3. After selecting the desired main menu item, press X to enter sub-menu for feature setting. 4. Use / to select the desired item and adjust the settings with /. 5. Press MENU on the projector or Menu on the remote control, the screen will return to the main menu. 6. To exit OSD, Press MENU on the projector or...
Page 34
ViewSonic Pro8500 32 Aspect Ratio Select how the picture fits on the screen: „Auto : Scales an image proportionally to fit the projectors native resolution in its horizontal or vertical width. „4:3 : Scales an image so that it is displayed in the center of the screen with a 4:3 aspect ratio. „16:9 : Scales an image so that it is displayed in the center of the screen with a 16:9 aspect ratio. „16:10 : Scale an image so that it is displayed in the center of the screen with a 16:10 aspect ratio. White...
Page 35
ViewSonic Pro8500 33 „Sharpness: Sharpen or soften the image. „Tint: Shift colors toward red or green.Audio Setting Allow you to enter the Audio Setting menu. „Computer 1: Select the audio input for Computer in 1 signal. „When Audio in 1 is turned on, Audio in 2 and Audio in 3 will turn off automatically. „Computer 2: Select the audio input for Computer in 2 signal. „When Audio in 2 is turned on, Audio in 1 and Audio in 3 will turn off automatically. „Video Source: Select the audio input for video...
Page 36
ViewSonic Pro8500 34 Auto Source Automatically scan through all the input sources. ECO Mode Use this function to dim the projector lamp light output which will lower power consumption and increase lamp life. „This function will be unavailable when the DCR function is on. Filter Mode Use this function to activate filter mode after the projector is installed an optional filter cover. High Altitude Use this function to allow the fans operates at full speed continuously to achieve proper high altitude...
Page 37
ViewSonic Pro8500 35 Enable this function when power consumption is under 1W. DC 12V Enable or disable to trigger external devices such as anelectric screen. Others Allow you to enter the Others menu. „Zoom: Zoom in and out the images. „DCR (Dynamic Contrast Ratio): Enable DCR will further enhance contrast ratio by darkening the black scenes. Disable DCR will resume to normal contrast performance. DCR will impact lamp life and system noise performance. „Message: Enable or disable the message box at...
Page 38
ViewSonic Pro8500 36 be used when DHCP is set to No. „The Subnet Mask “0.0.0.0” is prohibited. „Default Gateway: A server (or router) to communicate across networks (subnets) that are divided by Subnet Mask. This function can only be used when DHCP is set to No. „DNS: Setup DNS server address when DHCP is disable. „Apply: Save and execute the wired LAN settings. Wirless LAN Allow you to configure the wireless LAN settings. „Status: Display the projector’s status. „SSID: Display the projector’s SSID...
Page 39
ViewSonic Pro8500 37 Resolution Display current input source resolution. H. Frequency Display current image horizontal frequency. V. Frequency Display current image vertical frequency. MAC Address Abbreviation for Media Access Control Address. MAC Address is a unique ID number assigned to each network adapter. Filter Hours Display the filter’s elapsed operating time (in hours). „When Filter Mode is turned on, the Filter Hours also turns on automatically. Filter Hours Reset Reset the filter Hour to 0...
Page 40
ViewSonic Pro8500 38 Controlling the projector through a LAN environment You can manage and control the projector from one or more remote computers when they are properly connected to the same local area network. Wired connection If you are in a DHCP environment: 1. Take a RJ45 cable and connect one end to the RJ45 LAN input jack of the projector and the other end to the RJ45 port on your Ethernet or router. 2. Press MENU/EXIT on the projector or Menu on the remote control and then press / until...