ViewSonic Projector Pro8450w User Manual

ViewSonic  Pro8450w 29
Black, Red, Green, Blue, 
Cyan, Yellow, Magenta, White
Message
Input Password
Password Delete
Green Mode DC 12V
Quick Power On Quick Cooling
Start up Screen
ViewSonic, User
Screen Capture
Screen Capture Delete
-5 - +5
On, Off
Off, CC1, CC2, CC3, CC4, T1, T2On, Off
On, Off
On, Off On, Off
Others
On, Off
Function*3
Setting
Filter Mode*2High Altitude
OSD Transparency
Top-Left, Bottom-Left, 
Top-Right, Bottom-Right
Front-Table, Front-Ceiling, 
Rear-Table, Rear-Ceiling 0 - 60
0, 10,...

ViewSonic  Pro8450w 30
Information
Factory DefaultLamp Hours
Lamp Hours Reset Filter Hours*2
Filter Hours Reset*2
NetWork
Wired LAN
StatusDisconnect, Connect
On, Off
DNS
Apply
Status
ApplySSID
SSID Display
Connection Mode Disconnect, Connect
On, Off
AP, Infrastructure
On, Off
Wireless LAN
Network Restart Yes, No
MAC Address Input SourceComputer  1, Computer 2, 
Component, Composite, 
S-Video, HDMI, USB 1, USB 2
Default Gateway
*1 Adjustable range and default setting vary depending on signal type.
*2...

ViewSonic  Pro8450w 31
How to operate
1. Press MENU on the projector or Menu on the remote control to open the OSD menu.
2. When OSD is displayed, use  /  to select any feature in the main menu.
3. After selecting the desired main menu item, press X to enter sub-menu for feature
setting.
4. Use 
 /  to select the desired item and adjust the settings with /.
5. Press MENU on the projector or Menu on the remote control, the screen will return to
the main menu.
6. To exit OSD, 
Press MENU on the projector...

ViewSonic  Pro8450w 32
Aspect Ratio
Select how the picture fits on the screen:
„Auto : Scales an image proportionally to fit the projectors native resolution in its 
horizontal or vertical width.
„4:3 : Scales an image so that it is displayed in the center of the screen with a 4:3 
aspect ratio.
„16:9 : Scales an image so that it is displayed in the center of the screen with a 16:9 aspect ratio.
„16:10 : Scale an image so that it is displayed in the center of the screen with a 16:10 aspect ratio.
White...

ViewSonic  Pro8450w 33
„Sharpness: Sharpen or soften the image.
„Tint : Shift colors toward red or green.Audio Setting
Allow you to enter the Audio Setting menu.
„Computer 1: Select the audio input for Computer in 1 signal.
„When Audio in 1 is turned on, Audio in 2 and Audio in 3 will turn off 
automatically.
„Computer 2: Select the audio input for Computer in 2 signal.
„When Audio in 2 is turned on, Audio in 1 and Audio in 3 will turn off 
automatically.
„Video Source: Select the audio input for video...

ViewSonic  Pro8450w 34
Auto Source
Automatically scan through all the input sources.
ECO Mode
Use this function to dim the projector lamp li ght output which will lower power consumption 
and increase lamp life.
„This function will be unavailabl e when the DCR function is on.
Filter Mode
Use this function to activate filter mode after the projector is installed an optional filter cover.
High Altitude
Use this function to allow the fans operates at full speed continuously to achieve proper high 
altitude...

ViewSonic  Pro8450w 35
Enable this function when power consumption is under 1W.
DC 12V
Enable or disable to trigger external devices such as anelectric screen.
Others
Allow you to enter the Others menu.
„Zoom: Zoom in and out the images.
„DCR (Dynamic Contrast Ratio): Enable DCR will further enhance contrast ratio 
by darkening the black scenes. Disable DCR will resume to normal contrast 
performance. DCR will impact lamp life and system noise performance.
„Message: Enable or disable the message box at...

ViewSonic  Pro8450w 36
be used when DHCP is set to No.
„The Subnet Mask “0.0.0.0” is prohibited.
„Default Gateway: A server (or router) to communicate across networks (subnets) 
that are divided by Subnet Mask. This function can only be used when DHCP is 
set to No.
„DNS: Setup DNS server address when DHCP is disable.
„Apply: Save and execute the wired LAN settings.
Wirless LAN
Allow you to configure the wireless LAN settings.
„Status: Display the projector’s status.
„SSID: Display the projector’s SSID...

ViewSonic  Pro8450w 37
Resolution
Display current input source resolution.
H. Frequency
Display current image horizontal  frequency.
V. Frequency
Display current image vertical frequency.
MAC Address
Abbreviation for Media Access Control Addr ess. MAC Address is a unique ID number 
assigned to each network adapter.
Filter Hours
Display the filter’s elapsed operating time (in hours).
„When Filter Mode is turned on, the Filt er Hours also turns on automatically.
Filter Hours Reset
Reset the filter Hour to...

ViewSonic  Pro8450w 38
Controlling the projector through a LAN environment
You can manage and control the projector from one or more remote computers when 
they are properly connected to the same local area network.
Wired connection
If you are in a DHCP environment:
1. Take a RJ45 cable and connect one end to the RJ45 LAN input jack of the 
projector and the other end to the RJ45 port on your Ethernet or router.
2. Press 
MENU/EXIT on the projector or Menu on the remote control and then press 
/  until...