ViewSonic Projector PLED-W800 User Manual

							19
Playing Videos
To play videos from the USB flash drive or SD card, do the following:
Video Playback mode
Enter Home MenuSelect Video File Select [Video]
Playback File
2. Select Data Source
Change data source
COLOR
AUDIOMENU/ EXITCOLOR
AUDIOMENU/ EXIT
COLOR
AUDIOMENU/ EXIT
COLOR
AUDIOMENU/ EXIT
COLOR
AUDIOMENU/ EXIT
COLOR
AUDIOMENU/ EXIT
COLOR
AUDIOMENU/ EXIT
   The displayed screen may vary depending on the data source selected in t\
he previous step.  You can also press u on the remote control to enter the submenu or confirm the selection.  
						

							20
Menu itemDescription and Available Options
Display  Ratio Select the aspect ratio of the projected image.
Available options: Letter Box / Cut screen / Full 
screen / Original screen
Repeat  Mode Set video play mode option.
Available options: Single / Sequence
Enter Home Menu
Select [Settings]
Enter Settings Menu Adjust Settings
Select [Video]
Video Playback Mode
Video Settings
PlayFast forwardPause/ResumeRewind
Repeat
  
The button guide disappears when the keypad is not used for 3 seconds. T\
o display the button guide, 
press any key.
  During video playback, pres s / on the remote control or / on the control panel to adjust the 
volume.
   Press Enter to select the menu item.  Press Exit to return video file list.
p/q: Select itemt/u: Adjust settings
COLOR
AUDIOMENU/ EXIT
COLOR
AUDIOMENU/ EXIT
COLOR
AUDIOMENU/ EXIT
COLOR
AUDIOMENU/ EXIT
COLOR
AUDIOMENU/ EXIT  
						

							21
Playing Music
To play music from the USB flash drive or SD card, do the following:
Music Playback mode
Enter Home MenuSelect Audio File Select [Audio]Playback File
2. Select Data Source
Change data source
COLOR
AUDIOMENU/ EXITCOLOR
AUDIOMENU/ EXIT
COLOR
AUDIOMENU/ EXIT
COLOR
AUDIOMENU/ EXIT
COLOR
AUDIOMENU/ EXIT
COLOR
AUDIOMENU/ EXIT
COLOR
AUDIOMENU/ EXIT
   The displayed screen may vary depending on the data source selected in t\
he previous step.  You can also press u on the remote control to enter the submenu or confirm the selection.  
						

							22
Menu itemDescription and Available Options
Repeat  Mode Set music play mode option.
Available options: Single / Sequence
Enter Home Menu
Select [Settings]
Enter Settings Menu Adjust Settings Select [Audio]
Music Playback Mode
Music Settings
Next	audio	file
Repeat
Fast forward
Stop
Rewind
Previous	audio	file
Pause
Play
COLOR
AUDIOMENU/ EXIT
COLOR
AUDIOMENU/ EXITCOLOR
AUDIOMENU/ EXIT
COLOR
AUDIOMENU/ EXIT
COLOR
AUDIOMENU/ EXIT
   During music playback, pres s / on the remote control or / on the control panel to adjust the 
volume.
   Press Exit to return music file list.  
						

							23
Viewing Documents
To view documents from the USB flash drive or SD card, do the following:
View mode
Enter Home MenuSelect File Select [Document]View File
2. Select Data Source
Change data source
COLOR
AUDIOMENU/ EXITCOLOR
AUDIOMENU/ EXIT
COLOR
AUDIOMENU/ EXIT
COLOR
AUDIOMENU/ EXIT
COLOR
AUDIOMENU/ EXIT
COLOR
AUDIOMENU/ EXIT
COLOR
AUDIOMENU/ EXIT
   The displayed screen may vary depending on the data source selected in t\
he previous step.  You can also press u on the remote control to enter the submenu or confirm the selection.  
						

							24
Full screen view
Enter Home Menu
Select [Settings]Enter Settings Menu/Select [System]Adjust Settings
Menu item
Description and Available Options
Version
Displays	the	firmware	version.
UpdateAllows	you	to	update	the	firmware	of	the	projector	using	a	USB	flash	drive.
View Mode
Viewing System Settings
Move page up
Move page left
Move page right
Move page down  Zoom out
Close the menu
Fit to screen/height/width
Zoom in
  
The button guide disappears when the keypad is not used for 3 seconds. T\
o display the button guide, 
press any key.
  Use t/u to navigate between the button options.  Press Enter to select the menu item.  Press Exit to return document file list.
COLOR
AUDIOMENU/ EXITCOLOR
AUDIOMENU/ EXIT
p/q: Select itemt/u: Adjust settingsCOLOR
AUDIOMENU/ EXIT
COLOR
AUDIOMENU/ EXIT  
						

							25
USB Display
To project your computer screen, do the following:
Enter Home Menu
Select [Smart Display]
Enter Smart Display Menu
View PC Display
Select [USB Display]
Enter USB Display Page and 
perform USB Display software
Connect the USB cable
  When using USB Display function for the first time, install the 
software and execute:
For Windows OS: vPresenter_USB_Win.exe.
For Macintosh OS: vPresenter_USB_Mac-And-Driver-Installer.
  Extend display is not available on Windows 8/8.1.
COLOR
AUDIOMENU/ EXIT
COLOR
AUDIOMENU/ EXIT
COLOR
AUDIOMENU/ EXIT
COLOR
AUDIOMENU/ EXIT  
						

							26
Enter Home Menu
Select [WiFi Display]Plug in the Wi-Fi Dongle(Wi-Fi dongle is an optional accessory)Select [Smart Display]
Enter WiFi Display PageOn your mobile device, 
enable Wi-Fi function and 
then select the dongle 
name listed in the Wi-Fi 
Network Connection list.
Wi-Fi Display
When using Wi-Fi Display function for the first time, download and install the  vPresenter 
application into your mobile device.
Launch “vPresenter” 
application and select 
the projector name.Enter the Login Code as 
shown on the projected 
screen. Tap OK to 
continue.
Select the file to project .
  Download and install vPresenter application from  Play Store, APP Store, or PLED-W800 
server.
   Extend display is not available on Windows 8/8.1.
COLOR
AUDIOMENU/ EXIT
COLOR
AUDIOMENU/ EXIT
COLOR
AUDIOMENU/ EXIT  
						

							27
Configure Wireless Connection (via AP mode)
To access the SmartDisplay on your device via AP mode connection, do the following:
Select [AP Mode]
Enter Home Menu
Select [Settings] Select [WiFi]
Enter AP Mode Page. 
Select [ON] to enable the 
function.Configure the settings. 
Then select OK to save the 
settings. 
COLOR
AUDIOMENU/ EXIT
Plug in the Wi-Fi Dongle(Wi-Fi dongle is an optional accessory)
COLOR
AUDIOMENU/ EXITCOLOR
AUDIOMENU/ EXIT
COLOR
AUDIOMENU/ EXIT
COLOR
AUDIOMENU/ EXIT
p/q/t/u: Select item
Enter:	Confirm  
						

							28
Configure Wireless Connection (via Client mode)
To access the SmartDisplay on your device via Client mode connection, do \
the following:
Select [Client Mode]
Enter Home Menu
Select [Settings] Select [WiFi]
Enter AP Mode Page. 
Select [ON] to enable the 
function.
Configure the settings. 
Then select OK to save the 
settings. 
Select the device to connect. Be 
sure to enable Hotspot function 
of your mobile device. Enter the password. Then select OK to save the settings. 
Plug in the Wi-Fi Dongle(Wi-Fi dongle is an optional accessory)
p/q/t/u: Select item
Enter:	Confirm
COLOR
AUDIOMENU/ EXIT
COLOR
AUDIOMENU/ EXITCOLOR
AUDIOMENU/ EXIT
COLOR
AUDIOMENU/ EXIT
COLOR
AUDIOMENU/ EXIT
p/q/t/u: Select item
Enter:	Confirm