ViewSonic Projector PJD8633ws User Manual

							 44
Please pay attention to the limitation of input length (including space and other 
punctuation keys) in the list blow:
3. The info page displays the information and status of this projector.
Press exit to go back to the Crestron remote network operation page.
4. After pressing the button “Contact IT Help”, the Title window will appear in the 
upper right corner of the screen. You will be able to deliver messages to 
Category ItemInput LengthMaximum Number of 
Characters
Crestron Control IP Address 15
IP ID 2
Port 5
Projector Projector Name 10
Location 9
Assigned To 9
Network Configuration DHCP (Enabled) (N/A)
IP Address 15
Subnet Mask 15
Default Gateway 15
DNS Server 15
User Password Enabled (N/A)
New Password 20
Confirm 2
Admin Password Enabled (N/A)
New Password 20
Confirm 20 
						

							 45
RoomView software administrators/users who connect to the same local area 
network.
Important
•
Please only deliver the messages in English letters and digits.
For more information, visit http://www.crestron.com and www.crestron.com/
getroomview.
**Crestron RoomView
On the Edit Room page, enter the IP Address (or hostname) as shown on the
projectors on-screen display (OSD) menu, and 05 for IPID, 41794 for the reserved
Crestron control port.
About Crestron RoomView setting and command method, please access below 
website to get RoomView User Guide and more information:
http://www.crestron.com/features/
roomview_connected_embedded_projectors_devices/resources.asp 
						

							 46
Displaying images through vsPresenter
Downloading and installing vsPresenter
The vsPresenter is an application running on the host PC. It helps connect your 
computer to an available network projector and transfer the desktop content to the 
network projector via local network connection.
1. Enter the main page of Network Control. See steps 1-2 on page 41 for details.
2. Download vsPresenter.
3. When the download is complete, install the software to your computer by clicking 
the exe file. Follow the on-screen instructions to complete the installation.
4. Launch vsPresenter.
5. Select display zone by clicking 1, 2, 3, 4, L, R, All, or Background and then enter 
the password. The default password is “0000”.
Using vsPresenter
1. The Search page allows you to search and connect to a projector.
i. To connect to a projector, select Directly then type the projector IP address and 
click Connect.
61
2
4
5
3 
						

							 47
ii. To search for projectors, simply click Search to list all the projectors on the 
same local area network. Click the desired projectors in the Search result list, 
and click Connect directly. You can also type a desired projector name and 
click Search.
iii. You can link to the ViewSonic webpage control system on page 42.
2. If you want to freeze the projected image on the screen, press  . Any further 
movements will be not been seen on the screen until   is pressed.
3. You can choose a mirror mode or extension mode from here.
i. Mirror mode is to display the content in your computer.
ii. Extension mode is to extend the computer’s display to the projected screen.
4. The Setting page allows you to configure vsPresenter.
i. To use Compatible Mode, click On.
ii. To use Audio Streaming, click On. Click Apply.
iii. To select the image quality for video or presentation, click the down arrow to 
reveal a drop-down list and select a desired quality type.
iv. The Software Information is available on this page. 
						

							 48
5. You can manage the connected projectors listed under vsPresenter Management.
• Under a conference mode:
1. Only the administrator can take control.
2. A projector can display up to 4 computer screens.
• You can set the name of your computer under vsPresenter Management.
• For details about the icons, please see the following:
6. Disconnect
To disconnect from the projector(s), click the Disconnect icon.
Important
•
Be sure to turn off other virtual network control programs before using vsPresenter.
Icon Description Icon Description
You are a normal user and 
have no access to change the 
password.Disconnects from the projector.
You are an administrator and 
have authority to change the 
password.Opens the web page of the 
Network Control.
You are the user of the 
projector.There is another user of the 
projector.
You are an administrator of the 
projector.You are a normal user of the 
projector.
Sets a display zone for the projector. 
						

							 49
Displaying pictures with a USB storage device
The projector is built-in an application which can display packaged images on a USB 
storage device. It can eliminate the need for a computer source.
To display the images on a USB storage device:
1. Plug the USB storage device into the TYPE A USB socket.
2. Press the Source button and choose the USB A (Type-A) input. Note: If no other 
sources are connected and Auto Source is on, the projector will automatically 
select the USB A source.
3. Press Enter and  use  /  to select one of the EZ Media mode.
Photo mode 
						

							 50
Folders and supported files are represented in thumbnail mode.
Displaying a picture
• Press AutoSync on the remote control to display OSD control menu. Press button Action
Up
Scroll through the thumbnails Down
Left
Right
Enter Open a file
Exit Go back to Photo mode
Press button Action
Up Go to previous photo.
Down Go to next photo.
Enter Start slideshow.
Exit Go back to thumbnail file. 
						

							 51
Slideshows
• Photo slideshow duration time includes 2 sec, 5, sec and 10 sec. 
						

							 52
Audio mode
Audio playlist is displayed on the screen.
Press button Action
Up Go to previous audio
Down Go to next audio
Enter Play audio
Exit Go back to Audio mode 
						

							 53
When audio is playing
Press button Action
Up Go to previous audio
Down Go to next audio
Left Fast backward play
Right Fast forward play
Enter Play/pause
Exit Go back to playlist